Private branch exchange
A private branch exchange (PBX) is a
telephone exchangethat serves a particular business or office, as opposed to one that a common carrieror telephone company operates for many businesses or for the general public. PBXs are also referred to as:
* PABX - private automatic branch exchange
* EPABX - electronic private automatic branch exchange
PBXs make connections among the internal telephones of a private organization — usually a business — and also connect them to the public switched telephone network (PSTN) via
trunk lines. Because they incorporate telephones, fax machines, modems, and more, the general term "extension" is used to refer to any end point on the branch.
PBXs are differentiated from "key systems" in that users of key systems manually select their own outgoing lines, while PABXs select the outgoing line automatically. Hybrid systems combine features of both.
Initially, the primary advantage of PBXs was cost savings on internal phone calls: handling the circuit switching locally reduced charges for local phone service. As PBXs gained popularity, they started offering services that were not available in the operator network, such as hunt groups, call forwarding, and extension dialing. In the 1960s a simulated PBX known as
Centrexprovided similar features from the central telephone exchange.
Two significant developments during the 1990s led to new types of PBX systems. One was the massive growth of data networks and increased public understanding of
packet switching. Companies needed packet switched networks for data, so using them for telephone calls was tempting, and the availability of the Internet as a global delivery system made packet switched communications even more attractive. These factors led to the development of the VoIPPBX. (Technically, nothing was being "exchanged" any more, but the abbreviation PBX was so widely understood that it remained in use.)
The other trend was the idea of focusing on
core competence. PBX services had always been hard to arrange for smaller companies, and many companies realized that handling their own telephony was not their core competence. These considerations gave rise to the concept of hosted PBX. In a hosted setup, the PBX is located at and managed by the telephone service provider, and features and calls are delivered via the Internet. The customer just signs up for a service, rather than buying and maintaining expensive hardware. This essentially removes the "branch" from the "private" premises, moving it to a central location.
The term PBX was first applied when
switchboard operators ran company switchboards by hand. As automated electromechanical and then electronic switching systems gradually began to replace the manual systems, the terms PABX (private automatic branch exchange) and PMBX (private manual branch exchange) were used to differentiate them. Solid state digital systems were sometimes referred to as EPABXs (electronic private automatic branch exchange). Now, the term PBX is by far the most widely recognized. The acronym is now applied to all types of complex, in-house telephony switching systems, even if they are not private, branches, or exchanging anything.
PBXs are distinguished from smaller "key systems" by the fact that external lines are not normally indicated or selectable at an individual extension. From a user's point of view, calls on a key system are made by selecting a specific outgoing line and dialing the external number. A PBX, in contrast, has a
dial plan. Users dial an escape code (usually a single digit; often the same as the first digit of the local emergency telephone number) that connects them to an outside line (DDCO or Direct Dial Central Office in Bell System jargon), followed by the external number. Some modern number analysis systems allow users to dial internal and external numbers without escape codes.
A PBX will often include:
* The PBX’s internal switching network.
Microcontrolleror microcomputerfor arbitrary data processing, control and logic.
* Logic cards, switching and control cards, power cards and related devices that facilitate PBX operation.
* Stations or telephone sets, sometimes called lines.
* Outside Telco trunks that deliver signals to (and carry them from) the PBX.
* Console or switchboard allows the operator to control incoming calls.
Uninterruptible Power Supply(UPS) consisting of sensors, power switches and batteries.
* Interconnecting wiring.
* Cabinets, closets, vaults and other housings.
One of the latest trends in PBX development is the
VoIPPBX, also known as an IP-PBX or IPBX, which uses the Internet Protocolto carry calls. Most modern PBXs support VoIP. ISDNPBX systems also replaced some traditional PBXs in the 1990s, as ISDN offers features such as conference calling, call forwarding, and programmable caller ID. However, recent open sourceprojects combined with cheap modern hardware are sharply reducing the cost of PBX ownership.
For some users, the private branch exchange has gone full circle as a term. Originally having started as an organization's manual switchboard or
attendant consoleoperated by a telephone operatoror just simply the operator, they have evolved into VoIPcentres that are hosted by the operators or even hardware manufacturers. These modern IP Centrexsystems offer essentially the same service, but they have moved so far from the original concept of the PBX that the term hardly applies at all.
Even though VoIP gets a great deal of press, the old
circuit switchednetwork is alive and well, and the already bought PBX's are very competitive in services with modern IP Centrexes. Currently, there are four distinct scenarios in use:
* PBX (Private and Circuit Switched)
* Hosted/Virtual PBX (Hosted and Circuit Switched) or traditional
* IP PBX (Private and Packet Switched)
Centrexor Hosted/Virtual IP (Hosted and Packet Switched)
Since in reality people want to call from the IP side to the circuit switched
PSTN( SS7/ ISUP), the hosted solutions usually have to maneuver in both realms in one way or another. The distinctions are seldom visible to the end user.
Home and small business usage
Historically, the expense of full-fledged PBX systems has put them out of reach of small businesses and individuals. However, since the 1990s there has been a large set of small, consumer-grade and consumer-size PBXs available. These systems are not comparable in size, robustness or flexibility to commercial-grade PBXs, but still provide a surprising set of features.
The first consumer PBX systems were for the analog telephone systems, typically supporting four private analog and one public analog line. They are the size of a small cigar box or smaller and are inexpensive (e.g. US$50).
Europethese systems for analog phones were followed by consumer-grade PBXs for ISDN. Using small PBXs for ISDN is a logical step, since already the basic rate interfaceof ISDN (which is the phone interface individuals and small businesses typically get) provides two logical phone lines (two B channels) which can be used in parallel. Small, entry-level systems are also extremely cheap (e.g. US$100).
With the pickup of VoIP by consumers, of course consumer VoIP PBXs have seen the light, and PBX functions have become simple additional features of consumer-grade routers and switches.
Open sourceprojects have been available since the beginning of the 90s. These projects provide flexibility and features (often not needed or understood by average users), plus the means to actually inspect and change the inner working of a PBX. They have also opened business opportunities for newcomers to the market of mid-size PBXs, since they have lowered the entry barrier for new manufacturers.
Functionally, the PBX performs four main
* Establishing connections (circuits) between the telephone sets of two users. (e.g. mapping a dialled number to a physical phone, ensuring the phone isn't already busy)
* Maintaining such connections as long as the users require them (i.e. channelling voice signals between the users)
* Disconnecting those connections as per the users requirement
* Providing information for accounting purposes (e.g. metering calls)
In addition to these basic functions, PBXs offer many other
calling features and capabilities, with different manufacturers providing different features in an effort to differentiate their products.Common capabilities include (manufacturers may have a different name for each capability):
* Auto attendant
* Auto dialing
Automatic call distributor
* Automated directory services (where callers can be routed to a given employee by keying or speaking the letters of the employee's name)
Automatic ring back
Call forwardingon busy or absence
* Custom greetings
* Customised Abbreviated dialing (
Direct Inward Dialing
* Direct Inward System Access (DISA) (the ability to access internal features from an outside telephone line)
* Do not disturb (DND)
Interactive voice response
Music on hold
* Shared message boxes (where a department can have a shared voicemail box)
* Voice message broadcasting
* Voice paging (PA system)
* Welcome Message
Interfaces for connecting extensions to a PBX include:
* POTS (
plain old telephone service) - the common two-wire interface used in most homes. This is cheap and effective, and allows almost any standard phone to be used as an extension.
* proprietary - the manufacturer has defined a protocol. One can only connect the manufacturer's sets to their PBX, but the benefit is more visible information displayed and/or specific function buttons.
DECT- a standard for connecting cordless phones.
Internet Protocol- For example, H.323and SIP.
Interfaces for connecting PBXs to each other include:
* proprietary protocols - if equipment from several manufacturers is on site, the use of a standard protocol is required.
QSIG- for connecting PBXs to each other, usually runs over T1 ( T-carrier) or E1 ( E-carrier) physical circuits.
DPNSS- for connecting PBXs to trunk lines. Standardized by British Telecom, this usually runs over E1 (E-carrier) physical circuits.
Internet Protocol- H.323, SIP and IAX protocols are IP based solutions which can handle voice and multimedia (e.g. video) calls.
Interfaces for connecting PBXs to trunk lines include:
* standard POTS (
plain old telephone service) lines - the common two-wire interface used in most domestic homes. This is adequate only for smaller systems, and can suffer from not being able to detect incoming calls when trying to make an outbound call.
* ISDN - the most common digital standard for fixed telephony devices. This can be supplied in either Basic (2 circuit capacity) or Primary (24 or 30 circuit capacity) versions. Most medium to large companies would use Primary ISDN circuits carried on T1 or E1 physical connections.
* RBS - (
Robbed bit signaling) - delivers 24 digital circuits over a four-wire (T1) interface.
Internet Protocol- H.323, SIP, MGCP, and Inter-Asterisk eXchangeprotocols operate over IP and are supported by some network providers.
Interfaces for collecting data from the PBX:
* Serial interface - historically used to print every call record to a serial printer. Now an application connects via serial cable to this port.
* Network Port (Listen mode) - where an external application connects to the TCP or UDP port. The PBX then starts streaming information down to the application.
* Network Port (Server mode) - The PBX connects to another application or buffer.
* File - The PBX generates a file containing the call records from the PBX.
Hosted PBX systems
A hosted PBX system delivers PBX functionality as a service, available over the Public Service Telephone Network (PSTN) and/or the internet. Hosted PBXs are typically provided by the telephone company, using equipment located in the premises of the telephone company's exchange. This means the customer organization doesn't need to buy or install PBX equipment (generally the service is provided by a lease agreement) and the telephone company can (in some configurations) use the same switching equipment to service multiple PBX hosting accounts.
Instead of buying PBX equipment, users contract for PBX services from a hosted PBX service provider, a particular type of
application service provider(ASP). The first hosted PBX service was very feature-rich compared to most premise-based systems of the time. In fact, some PBX functions, such as follow-me calling, appeared in a hosted service before they became available in hardware PBX equipment. Since that introduction, updates and new offerings from several companies have moved feature sets in both directions. Today, it is possible to get hosted PBX service that includes far more features than were available from the first systems of this class, or to contract with companies that provide less functionality for more simple needs.
In addition to the features available from premises-based PBX systems, hosted-PBX:
* Allows a single number to be presented for the entire company, despite its being geographically distributed. A company could even choose to have no premises, with workers connected from home using their domestic telephones but receiving the same features as any PBX user.
* Allows multimodal access, where employees access the network via a variety of telecommunications systems, including POTS, ISDN, cellular phones, and VOIP. This allows one extension to ring in multiple locations (either concurrently or sequentially).
* Supports integration with custom toll plans (that allow intra company calls, even from private premises, to be dialed at a cheaper rate) and integrated billing and accounting (where calls made on a private line but on the company's behalf are billed centrally to the company).
* Eliminates the need for companies to manage or pay for on-site hardware maintenance.
A mobile PBX is a hosted PBX service that extends fixed-line PBX functionality to mobile devices such as cellular handsets, smartphones and PDA phones by provisioning them as extensions. Mobile PBX services also can include fixed-line phones. Mobile PBX systems are different from other hosted PBX systems that simply forward data or calls to mobile phones by allowing the mobile phone itself, through the use of buttons, keys and other input devices, to control PBX phone functions and to manage communications without having to call into the system first.
IP PBXhandles voice signals under Internet protocol, bringing benefits for computer telephony integration(CTI). An IP-PBX can exist as physical hardware, or can carry out it functions virtually, performing the call-routing activities of the traditional PBX or key system as a software system. The virtual version is also called a "Soft PBX".
Ground start trunk
*The acronym WPBX, meaning Wireless PBX, is sometimes used.
*Much of the terminology related to PBX systems and telecommunications in general is borrowed from the railroad industry. i.e. Lines, Trunks, Stations, Terminals, Switches etc.
Wikimedia Foundation. 2010.
Look at other dictionaries:
private branch exchange — ➔ PBX * * * private branch exchange UK US noun [C] ► COMMUNICATIONS PBX(Cf. ↑PBX) … Financial and business terms
private branch exchange — įstaigos telefono stotis statusas T sritis radioelektronika atitikmenys: angl. private branch exchange; private telephone exchange vok. Anstaltfernsprechunterstation, f; Privatfernsprechunterstation, f rus. учрежденческая телефонная станция, f… … Radioelektronikos terminų žodynas
private branch exchange — Abbreviated PBX. A telephone system, usually owned by the customer, that serves a particular location, such as an office, providing connections from one extension to another, as well as a set of connections to the external telephone network.… … Dictionary of networking
private branch exchange — (PBX) A private, automatic telephone exchange connected to the public telephone network that manages calls without operator assistance … IT glossary of terms, acronyms and abbreviations
private branch exchange — noun a telephone exchange by means of which it is possible for an operator to connect any two extensions in the same establishment … Australian English dictionary
private branch exchange — noun A telecommunications switching system, physically located at a customers place of business, that provides internal communication between users and also access to outside (trunk) telephone lines … Wiktionary
private branch exchange — See PBX … Dictionary of telecommunications
Private Branch Exchange — n. PBX, telephone system that is owned by an organization (in which each worker has a line for internal calls while sharing a few external lines with the other workers) … English contemporary dictionary
Private Branch Exchange — Refer instead to PBX … International financial encyclopaedia
private telephone exchange — įstaigos telefono stotis statusas T sritis radioelektronika atitikmenys: angl. private branch exchange; private telephone exchange vok. Anstaltfernsprechunterstation, f; Privatfernsprechunterstation, f rus. учрежденческая телефонная станция, f… … Radioelektronikos terminų žodynas