Columbus (ISS module)
Like the Harmony and Tranquility modules, the Columbus laboratory was constructed in Turin, Italy by Rome based Alcatel Alenia Space with respect to structures and thermal control. The functional architecture (including software) of the lab was designed by EADS in Germany where it was also integrated before being flown to the Kennedy Space Center (KSC) in Florida in an Airbus Beluga. It was launched aboard Space Shuttle Atlantis on February 7, 2008 on flight STS-122. It is designed for ten years of operation. The module is controlled by the Columbus Control Centre, located at the German Space Operations Centre, part of the German Aerospace Center in Oberpfaffenhofen near Munich, Germany.
The European Space Agency has spent €1.4 billion (about US$2 billion) on building Columbus, including the experiments that will fly in it and the ground control infrastructure necessary to operate them.
The laboratory is a cylindrical module with two end cones. It is 4,477 mm (15 ft) in external diameter and 6,871 mm (23 ft) in overall length, excluding the projecting external experiment racks. Its shape is very similar to that of the Multi-Purpose Logistics Modules (MPLMs), since both were designed to fit in the cargo bay of a Space Shuttle orbiter. The starboard end cone contains most of the laboratory's on-board computers. The port end cone contains the Common Berthing Mechanism.
ESA chose EADS Astrium Space Transportation as prime contractor for Columbus. The Columbus flight structure, the micro-meteorite protection system, the active and passive thermal control, the environmental control, the harness and all the related ground support equipment were designed and qualified by Alcatel Alenia Space in Turin, Italy as defined by the PICA - Principle (for definition see History below); the related hardware was pre-integrated and sent as PICA in September 2001 to Bremen. The lab was then fully integrated and qualified on system level at the EADS Astrium Space Transportation facilities in Bremen, Germany.
Launch, berthing and outfitting
In November 2007, Columbus was moved out of the KSC Space Station Processing Facility, and installed into the payload bay of the Atlantis orbiter for launch on ISS assembly flight 1E. During cryo-filling of the space shuttle External Tank (ET) with liquid hydrogen and liquid oxygen prior to the first launch attempt on December 6, 2007, two of four LH2 ECO sensors failed a test. Mission rules called for at least three of the four sensors to be in working order for a launch attempt to proceed. As a result of the failure, the Launch Director Doug Lyons postponed the launch, initially for 24 hours. This was later revised into a 72 hour delay, resulting in a next launch attempt set for Sunday December 9, 2007. This launch attempt was scrubbed when one of the ECO sensors again failed during fuelling.
The ECO sensors external connector was changed on the space shuttle external tank, causing a two month delay in the launch. Columbus was finally launched successfully on the third attempt at 2:45pm EST, February 7, 2008. Once at the station, Canadarm2 removed Columbus from the docked shuttle's cargo bay and attached it to the starboard hatch of Harmony (also known as Node 2), with the cylinder pointing outwards on February 11, 2008.
Research activities and payloads
The laboratory can accommodate ten active International Standard Payload Racks (ISPRs) for science payloads. Agreements with NASA allocate to ESA 51% usage of the Columbus Laboratory. ESA is thus allocated five active rack locations, with the other five being allocated to NASA. Four active rack locations are on the forward side of the deck, four on the aft side, and two are in overhead locations. Three of the deck racks are filled with life support and cooling systems. The remaining deck rack and the two remaining overhead racks are storage racks.
In addition, four un-pressurized payload platforms can be attached outside the starboard cone, on the Columbus External Payload Facility (CEPF). Each external payload is mounted on an adaptor able to accommodate small instruments and experiments totalling up to 230 kilograms (507 lb).
The following European ISPRs have been initially installed inside Columbus:
- Fluid Science Laboratory (FSL)
- European Physiology Modules (EPM)
- European Drawer Rack (EDR)
- European Storage Rack
The first external payloads were mounted on Columbus by crew members of the mission STS-122 mission. The three payloads mounted are:
- European Technology Exposure Facility (EuTEF) platform, which accommodates nine instruments: TRIBOLAB, PLEGPAY, MEDET, EUFIDE, DEBIE-2, FIPEX, EUTEMP, EXPOSE, DOSTEL, and the Earth Viewing Camera.
- Solar Monitoring Observatory (SOLAR)
- MISSE-6 (NASA payload)
Planned additional external payload:
- European Transportation Carrier (ISS Facility) (ETC)
- Columbus – External Payload Facility (Columbus-EPF)
Columbus was originally planned as part of the Columbus program, an ESA program to develop an autonomous manned space station that could be used for a variety of microgravity experiments. The program ran from 1986 to 1991 and included three components: a Man-Tended Free Flyer (MTFF) element serviced by the Hermes shuttle, an Attached Pressurized Module (APM), and a Polar Platform (PPF). After several budget cuts and cancellation of Hermes, all that remained in the Columbus program was the APM, finally renamed to Columbus.
When only the APM was left in the program there were not enough tasks for the two main contributors Germany and Italy represented by MBB-ERNO and Alenia respectively. As compromise the PICA (Pre Integrated Columbus APM) - Principle was invented meaning a split responsibility where Alenia as a co-prime is responsible for the overall Columbus configuration, the mechanical and thermal/life support systems, HFE and harness design/manufacturing whereas EADS Astrium Space Transportation is responsible for the overall Columbus design and all Avionics systems including electrical harness design and software. Splitting off systems engineering responsibility and harness design under separate fixed-price contracts was found not to be advantageous with respect to efficiency and fast decision making as financial reasonings were pre-dominant in the last phase of development and verification.
The structure used for Columbus is based on the MPLM module built for NASA by Thales Alenia Space. In 2000 the pre-integrated module (structure including harness and tubing) was delivered to Bremen in Germany by the Co-prime contractor Alenia. The final integration and system testing was performed by the overall prime contractor EADS Astrium Space Transportation, after that the initial Payload was integrated and the overall complement checked-out.
The final schedule was much longer than originally planned due to development problems (several caused by the complex responsibility splitting between the Co-prime and the Overall prime contractor) and design changes introduced by ESA but being affordable due to the Shuttle problems delaying the Columbus launch for several years. The main design change was the addition of the External Payload Facility (EPF), which was driven by the different European Payload organizations being more interested in outer space than internal experiments. Also the addition of a terminal for direct communications to/from ground, which could have been used also as back-up for the ISS system, was studied but not implemented for cost reasons.
- Length: 7 m (23 ft)
- Diameter: 4.5 m (15 ft)
- Total mass: 10,300 kg (22,708 lb)
- Total payload mass 2,500 kg (5,512 lb)
- Total on-orbit mass 12,800 kg (28,219 lb)
- ^ Harwood, William (February 11, 2008). "Station arm pulls Columbus module from cargo bay". Spaceflightnow.com. http://spaceflightnow.com/shuttle/sts122/080211fd5/index3.html. Retrieved 7 August 2009.
- ^ "Space Shuttle Mission STS-122: The Voyage of Columbus". NASA. http://www.nasa.gov/mission_pages/shuttle/main/index.html.
- ^ "Shuttle Launch Now Targeted For 2nd January". December 2007. http://www.space-travel.com/reports/Shuttle_Launch_Now_Targeted_For_2nd_January_999.html.
- ^ NASA (2007). "NASA Postpones Space Shuttle Atlantis Launch; Aims for Friday". NASA. http://www.nasa.gov/home/hqnews/2007/dec/HQ_07266_Atlantis_Scrub_Release.html.
- ^ "Node 2, Columbus, Japanese Experiment Module and Special Purpose Dexterous Manipulator (SPDM) installation animation". NASA. 2007-01-26. http://www.nasa.gov/mission_pages/station/expeditions/expedition14/exp14_msb_012607.html.
- ^ Giuseppe Reibaldi et al. (May 2005). "The ESA Payloads for Columbus – A bridge between the ISS and exploration" (PDF). ESA. http://www.esa.int/esapub/bulletin/bulletin122/bul122h_reibaldi.pdf.
- ^ "ISS Utilization: SOLAR and EuTEF - external payloads on the Columbus Lab". eoPortal. http://directory.eoportal.org/presentations/7111/10000771.html.
- ^ Steve Feltham & Giacinto Gianfiglio (March 2002). "ESA’s ISS External Payloads" (PDF). ESA. http://www.esa.int/esapub/onstation/os8.pdf.
- ^ "EUTEF - European Technology Exposure Facility". Carlo Gavazzi Space. http://www.cgspace.it/index.php?option=com_content&task=view&id=198.
- ^ MBB-ERNO was renamed to Deutsche Aerospace then Daimler-Benz Aerospace then DaimlerChrysler Aerospace then Astrium then EADS SPACE Transportation and finally EADS Astrium Space Transportation
- ESA: Columbus Laboratory
- ESA: Technical specifications of the Columbus Laboratory
- ESA: Columbus structure completed
- ESA's Columbus blog
- Thales Alenia Space page for Columbus
Components of the International Space Station Overview Major components
in orbitZarya (Functional Cargo Block) · Zvezda (Service Module) · Unity (Node 1) · Harmony (Node 2) · Tranquility (Node 3) · Destiny (Laboratory) · Columbus (Laboratory) · Kibō (PM, ELM-PS, EF) · Quest (Airlock) · Pirs (Airlock / Docking Module) · Rassvet (MRM 1) · Poisk (MRM 2) · Leonardo (PMM) · Cupola · Integrated Truss Structure (ITS)
with no launch plan
Scheduled for launch
Proposed module Cancelled Support vehicles Mission control centers European Space Agency
Ariane 5 · Vega (2012)FacilitiesCommunicationsProgrammesPredecessorsRelated
ProjectsScienceSolar PhysicsPlanetary ScienceGiotto (1985-1992) · Huygens (1997-2005) · SMART-1 (2003-2006) · Mars Express (2003-present) · Rosetta (2005-present) · Venus Express (2005-present) · BepiColombo (2014) · ExoMars Trace Gas Orbiter (2016) · ExoMars EDM (2016) · ExoMars Rover (2018) · Mars sample return mission (proposal/2020-2022) · Jupiter Icy Moon Explorer (proposal/2020) · MarcoPolo-R (proposal/2022)Astronomy
and CosmologyCos-B (1975-1982) · IUE (1978-1996) · EXOSAT (1983-1986) · Hipparcos (1989-1993) · Hubble (1990-present) · Eureca (1992-1993) · ISO (1995-1998) · XMM-Newton (1999-present) · INTEGRAL (2002-present) · COROT (2006-present) · Planck (2009-present) · Herschel (2009-present) · Gaia (2013) · JWST (2018) · Euclid (2019) · IXO (proposal/2020) · LISA (proposal/2020) · EChO (proposal/2022) · LOFT (proposal/2022) · Plato (proposal/2022) · STE-QUEST (proposal/2022)Earth ObservationMeteosat First Generation (1977-1997) · ERS-1 (1991-2000) · ERS-2 (1995-2011) · Meteosat Second Generation (2002-present) · Envisat (2002-present) · Double Star (2003-2007) · MetOp-A (2006-present) · GOCE (2009-present) · SMOS (2009-present) · CryoSat-2 (2010-present) · Swarm (2012) · Sentinel 1 (2013) · ADM-Aeolus (2013) · Sentinel 2 (2014) · EarthCARE (2016) · Sentinel 3 (2017) · Meteosat Third Generation (2017)Human
← 2007 · Orbital launches in 2008 · 2009 →Thuraya 3 | TecSAR | Ekspress AM-33 | Progress M-63 | STS-122 (Columbus) | Thor 5 | Kizuna | Jules Verne | STS-123 (Kibō ELM-PS · Dextre · Spacelab MD002) | USA-200 | AMC-14 | USA-201 | DirecTV-11 | SAR-Lupe 4 | Soyuz TMA-12 | ICO G1 | C/NOFS | Vinasat-1 · Star One C2 | Tianlian I-01 | GIOVE-B | Cartosat-2A · TWSAT · CanX-2 · CUTE-1.7+APD II · Delfi-C3 · AAUSAT-II · Compass-1 · SEEDS-2 · CanX-6 · Rubin-8 | Amos-3 | Progress M-64 | Galaxy 18 | Kosmos 2437 · Kosmos 2438 · Kosmos 2439 · Yubileiny | Feng Yun 3A | STS-124 (Kibō PM) | Chinasat-9 | Fermi | Skynet 5C · Turksat 3A | Orbcomm FM29 · Orbcomm FM37 · Orbcomm FM38 · Orbcomm FM39 · Orbcomm FM40 · Orbcomm FM41 | Jason-2 | Kosmos 2440 | Badr-6 · ProtoStar 1 | EchoStar XI | SAR-Lupe 5 | Kosmos 2441 | Trailblazer · NanoSail-D · PRESat · Explorers | Superbird-C2 · AMC-21 | Omid | Inmarsat-4 F3 | Tachys · Mati · Choma · Choros · Trochia | Huan Jing 1A · Huan Jing 1B | GeoEye-1 | Progress M-65 | Nimiq-4 | Galaxy 19 | Kosmos 2442 · Kosmos 2243 · Kosmos 2444 | Shenzhou 7 (Ban Xing) | RatSat | THEOS | Soyuz TMA-13 | IBEX | Chandrayaan-1 (MIP) | Shijian 6E · Shijian 6F | COSMO-3 | Venesat-1 | Chuang Xin 1B · Shiyan Weixing 3 | Astra 1M | Kosmos 2445 | STS-126 (Leonardo MPLM · PSSC-1) | Progress M-01M | Yaogan 4 | Kosmos 2446 | Yaogan 5 | Hot Bird 9 · Eutelsat W2M | Feng Yun 2E | Kosmos 2447 · Kosmos 2448 · Kosmos 2449Payloads are separated by bullets ( · ), launches by pipes ( | ). Manned flights are indicated in bold text. Uncatalogued launch failures are listed in italics. Payloads deployed from other spacecraft are denoted in brackets.
Wikimedia Foundation. 2010.
Look at other dictionaries:
Columbus (ISS) — Navigation Internationale Raumstation Liste der ISS Module … Deutsch Wikipedia
Unity (ISS module) — ISS Unity connecting module (NASA) The Unity connecting module was the first U.S. built component of the International Space Station. It is cylindrical in shape, with six berthing locations (forward, aft, port, starboard, zenith, and nadir)… … Wikipedia
Poisk (ISS module) — Poisk docking module at the Space Station. Poisk (Russian: Поиск; lit. Search), also known as the Mini Research Module 2 (MRM 2), Малый исследовательский модуль 2, or МИМ 2, is a docking module of the International Space Station. Its original… … Wikipedia
Tranquility (ISS module) — Tranquility photographed just before being installed to Unity node … Wikipedia
Rassvet (ISS module) — Rassvet as seen from the Cupola module during STS 132 … Wikipedia
Pirs (ISS module) — View of SO1 Pirs Docking compartment The Pirs docking compartment is a Russian module of the International Space Station (ISS). Pirs (Russian: Пирс, meaning pier ) also called Stikovochny Otsek 1 or SO 1 (Russian: Стыковочный отсек, docking… … Wikipedia
Harmony (ISS module) — Node 2 shown connected to Columbus, JEM, PMA 2 and Discovery. The nadir and zenith locations are open. Harmony, also known as Node 2, is the utility hub of the International Space Station. The hub contains four racks that provide electrical power … Wikipedia
Nauka (ISS module) — Outdated drawing with Nauka docked to Zarya Nauka (Russian: Наука; lit. Science), also known as the Multipurpose Laboratory Module (MLM), (Russian: Многофункциональный лабораторный модуль, or МЛМ), will be a component of the International Space… … Wikipedia
Zvezda (ISS module) — For other uses, see Zvezda (disambiguation). ISS Zvezda The Zvezda service module of the ISS with Zarya to the right and a docked Soyuz spacecraft to the left … Wikipedia
Destiny (ISS module) — The Destiny Laboratory Module (NASA) being installed on the International Space Station. See also: Scientific research on the ISS The Destiny module is the primary operating facility for U.S. research payloads aboard the International Space… … Wikipedia