Cooling curve


Cooling curve
A cooling curve of naphthalene from liquid to solid.

A cooling curve is a line graph that represents the change of phase of matter, typically from a gas to a solid or a liquid to a solid. The independent variable (X-axis) is time and the dependent variable (Y-axis) is temperature.[1] Below is an example of a cooling curve used in castings.

Cooling curve pure metal.svg

The initial point of the graph is the starting temperature of the matter, here noted as the "pouring temperature". When the phase change occurs there is a "thermal arrest", that is the temperature stays constant. This is because the matter has more internal energy as a liquid or gas than in the state that it is cooling to. The amount of energy required for a phase change is known as latent heat. The "cooling rate" is the slope of the cooling curve at any point.

In the part of the curve where the temperature decreases, the kinetic energy also decreases while the potential energy stays the same. However, at the phase transition, where the curve is flat, the kinetic energy stays the same while the potential energy decreases.[citation needed]

References

  1. ^ Garland, Nibler, and Shoemaker. Experiments in Physical Chemistry (7th ed.)

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Cooling curve — Cooling curve. См. Кривая охлаждения. (Источник: «Металлы и сплавы. Справочник.» Под редакцией Ю.П. Солнцева; НПО Профессионал , НПО Мир и семья ; Санкт Петербург, 2003 г.) …   Словарь металлургических терминов

  • cooling curve — aušimo kreivė statusas T sritis fizika atitikmenys: angl. cooling curve vok. Abkühlungskurve, f rus. кривая охлаждения, f pranc. courbe de refroidissement, f …   Fizikos terminų žodynas

  • melting point by cooling curve — lydymosi temperatūra pagal šaldymo kreivę statusas T sritis Standartizacija ir metrologija apibrėžtis Temperatūra, kuriai esant išlydyto ir standartinėmis sąlygomis aušinamo naftos vaško šaldymo kreivėje pirmą kartą pasirodo savitoji… …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • Кривая охлаждения — Cooling curve Кривая охлаждения. График, показывающий зависимость между временем и температурой во время охлаждения материала. Используется для определения температур, при которых происходят фазовые превращения. Иногда используются не время, а… …   Словарь металлургических терминов

  • Casting (metalworking) — Casting iron in a sand mold In metalworking, casting involves pouring liquid metal into a mold, which contains a hollow cavity of the desired shape, and then allowing it to cool and solidify. The solidified part is also known as a casting, which… …   Wikipedia

  • industrial glass — Introduction       solid material that is normally lustrous and transparent in appearance and that shows great durability under exposure to the natural elements. These three properties lustre, transparency, and durability make glass a favoured… …   Universalium

  • Glass transition temperature — The glass transition temperature, T g, is the temperature at which an amorphous solid, such as glass or a polymer, becomes brittle on cooling, or soft on heating. More specifically, it defines a pseudo second order phase transition in which a… …   Wikipedia

  • Glass transition — The liquid glass transition (or glass transition for short) is the reversible transition in amorphous materials (or in amorphous regions within semicrystalline materials) from a hard and relatively brittle state into a molten or rubber like state …   Wikipedia

  • Critical point (thermodynamics) — Carbon dioxide creating a fog when cooling from supercritical to critical temperature In physical chemistry, thermodynamics, chemistry and condensed matter physics, a critical point, also called a critical state, specifies the conditions… …   Wikipedia

  • Matter — This article is about the concept in the physical sciences. For other uses, see Matter (disambiguation). Matter is a general term for the substance of which all physical objects consist.[1][2] Typically, matter includes atoms and other particles… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.