Riemannian geometry


Riemannian geometry

:"Elliptic geometry is also sometimes called Riemannian geometry."

Riemannian geometry is the branch of differential geometry that studies Riemannian manifolds, smooth manifolds with a "Riemannian metric", i.e. with an inner product on the tangent space at each point which varies smoothly from point to point. This gives in particular local notions of angle, length of curves, surface area, and volume. From those some other global quantities can be derived by integrating local contributions.

Riemannian geometry originated with the vision of Bernhard Riemann expressed in his inaugurational lecture "Über die Hypothesen, welche der Geometrie zu Grunde liegen" (German: On the hypotheses on which geometry is based). It is a very broad and abstract generalization of the differential geometry of surfaces in R3. Development of Riemannian geometry resulted in synthesis of diverse results concerning the geometry of surfaces and the behavior of geodesics on them, with techniques that can be applied to the study of differentiable manifolds of higher dimensions. It inspired Einstein's general relativity theory, made profound impact on group theory and representation theory, as well as analysis, and spurred the development of algebraic and differential topology.

Introduction

Riemannian geometry was first put forward in generality by Bernhard Riemann in the nineteenth century. It deals with a broad range of geometries whose metric properties vary from point to point, as well as two standard types of Non-Euclidean geometry, spherical geometry and hyperbolic geometry, as well as Euclidean geometry itself.

Any smooth manifold admits a Riemannian metric, which often helps to solve problems of differential topology. It also serves as an entry level for the more complicated structure of pseudo-Riemannian manifolds, which (in four dimensions) are the main objects of the theory of general relativity. Other generalizations of Riemannian geometry include Finsler geometry and spray spaces.

There is no easy introduction to Riemannian geometryFact|date=July 2008. It is generally recommendedWho|date=July 2008 that one should work in the subject for quite a while to build some geometric intuition, usually by doing enormous amounts of calculations. The following articles might serve as a rough introduction:

#Metric tensor
#Riemannian manifold
#Levi-Civita connection
#Curvature
#Curvature tensor.

The following articles might also be useful:

#List of differential geometry topics
#Glossary of Riemannian and metric geometry

Classical theorems in Riemannian geometry

What follows is an incomplete list of the most classical theorems in Riemannian geometry. The choice is made depending on its importance, beauty, and simplicity of formulation. Most of the results can be found in the classic monograph by Jeff Cheeger and D. Ebin (see below).

The formulations given are far from being very exact or the most general. This list is oriented to those who already know the basic definitions and want to know what these definitions are about.

General theorems

#Gauss–Bonnet theorem The integral of the Gauss curvature on a compact 2-dimensional Riemannian manifold is equal to 2pichi(M) where chi(M) denotes the Euler characteristic of "M". This theorem has a generalization to any compact even-dimensional Riemannian manifold, see generalized Gauss-Bonnet theorem.
#Nash embedding theorems also called fundamental theorems of Riemannian geometry. They state that every Riemannian manifold can be isometrically embedded in a Euclidean space R"n".

Local to global theorems

In all of the following theorems we assume some local behavior of the space (usually formulated using curvature assumption) to derive some information about the global structure of the space, including either some information on the topological type of the manifold or on the behavior of points at "sufficiently large" distances.

Pinched sectional curvature

#Brendle and Schoen's differential sphere theorem. If "M" is a compact "n"-dimensional Riemannian manifold with sectional curvature strictly pinched between 1/4 and 1 then "M" is diffeomorphic to a spherical space form. This is sharp: complex projective space has curvature non-strictly pinched between 1/4 and 1. If strict pinching is replaced by weak pinching (i.e. if the sectional curvature of "M" lies in the closed interval [1/4,1] ), then "M" is diffeomorphic to a spherical space form or isometric to a locally symmetric space. For more information see the article on the Sphere theorem.
#Cheeger's finiteness theorem. Given constants "C" and "D" there are only finitely many (up to diffeomorphism) compact "n"-dimensional Riemannian manifolds with sectional curvature |K|le C and diameter le D.
#Gromov's almost flat manifolds. There is an epsilon_n>0 such that if an "n"-dimensional Riemannian manifold has a metric with sectional curvature |K|le epsilon_n and diameter le 1 then its finite cover is diffeomorphic to a nil manifold.

Positive sectional curvature

#Soul theorem. If "M" is a non-compact complete positively curved "n"-dimensional Riemannian manifold then it is diffeomorphic to Rn.
#Gromov's Betti number theorem. There is a constant "C=C(n)" such that if "M" is a compact connected "n"-dimensional Riemannian manifold with positive sectional curvature then the sum of its Betti numbers is at most "C".

Positive Ricci curvature

#Myers theorem. If a compact Riemannian manifold has positive Ricci curvature then its fundamental group is finite.
#Splitting theorem. If a complete "n"-dimensional Riemannian manifold has nonnegative Ricci curvature and a straight line (i.e. a geodesic which minimizes distance on each interval) then it is isometric to a direct product of the real line and a complete ("n"-1)-dimensional Riemannian manifold which has nonnegative Ricci curvature.
#Bishop's inequality. The volume of a metric ball of radius "r" in a complete "n"-dimensional Riemannian manifold with positive Ricci curvature has volume at most that of the volume of a ball of the same radius "r" in Euclidean space.
#Gromov's compactness theorem. The set of all Riemannian manifolds with positive Ricci curvature and diameter at most "D" is pre-compact in the Gromov-Hausdorff metric.

Positive scalar curvature

#The "n"-dimensional torus does not admit a metric with positive scalar curvature.
#If the injectivity radius of a compact "n"-dimensional Riemannian manifold is ge pi then the average scalar curvature is at most "n"("n"-1).

Non-positive sectional curvature

#The Cartan–Hadamard theorem states that a complete simply connected Riemannian manifold M with nonpositive sectional curvature is diffeomorphic to the Euclidean space R^n with n = dim M via the exponential map at any point. It implies that any two points of a simply connected complete Riemannian manifold with nonpositive sectional curvature are joined by a unique geodesic.

Negative sectional curvature

#The geodesic flow of any compact Riemannian manifold with negative sectional curvature is ergodic.
#If "M" is a complete Riemannian manifold with sectional curvature bounded above by a strictly negative constant "k" then it is a CAT("k") space. Consequently, its fundamental group "Γ" = π1("M") is Gromov hyperbolic. This has many implications for the structure of the fundamental group:::* it is finitely presented;::* the word problem for "Γ" has a positive solution;::* the group "Γ" has finite virtual cohomological dimension;::* it contains only finitely many conjugacy classes of elements of finite order;::* the abelian subgroups of "Γ" are virtually cyclic, so that it does not contain a subgroup isomorphic to Z×Z.

Negative Ricci curvature

#The isometry group of a compact Riemannian manifold with negative Ricci curvature is discrete.
#Any smooth manifold of dimension n geq 3 admits a Riemannian metric with negative Ricci curvature [Joachim Lohkamp has shown (Annals of Mathematics, 1994) that any manifold of dimension greater than two admits a metric of negative Ricci curvature.] . ("This is not true for surfaces".)

ee also

*Shape of the universe
*Basic introduction to the mathematics of curved spacetime
*Normal coordinates
*Systolic geometry

Notes

References

;Books
*. "(Provides a historical review and survey, including hundreds of references.)"

*; Revised reprint of the 1975 original.

*.

*.

*

;Papers

*citation|first1=Simon|last1=Brendle|first2=Richard M.|last2=Schoen|authorlink2=Richard Schoen|title=Classification of manifolds with weakly 1/4-pinched curvatures|journal=Preprint|year=2007 arxiv | id= 0705.3963

External links

* [http://mathworld.wolfram.com/RiemannianGeometry.html MathWorld: Riemannian Geometry]


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Riemannian geometry — [rē män′ē ən] n. [after G. F. B. Riemann (1826 66), Ger mathematician] a form of non Euclidean geometry in which there are no parallel lines, since its figures can be conceived as constructed on a curved surface where all straight lines intersect …   English World dictionary

  • Riemannian geometry — Geom. 1. Also called elliptic geometry. the branch of non Euclidean geometry that replaces the parallel postulate of Euclidean geometry with the postulate that in a plane every pair of distinct lines intersects. Cf. hyperbolic geometry. 2. the… …   Universalium

  • Riemannian geometry — noun the branch of differential geometry that studies Riemannian manifolds …   Wiktionary

  • Riemannian geometry — noun (mathematics) a non Euclidean geometry that regards space as like a sphere and a line as like a great circle Bernhard Riemann pioneered elliptic geometry • Syn: ↑elliptic geometry • Topics: ↑mathematics, ↑math, ↑maths …   Useful english dictionary

  • Riemannian geometry — Riemann′ian geom′etry n. math. the branch of non Euclidean geometry that replaces the parallel postulate of Euclidean geometry with the postulate that in a plane every pair of distinct lines intersects • Etymology: 1915–20; after G.F.B. Riemann …   From formal English to slang

  • Riemannian geometry — noun Etymology: G. F. B. Riemann Date: 1896 a non Euclidean geometry in which straight lines are geodesics and in which the parallel postulate is replaced by the postulate that every pair of straight lines intersects …   New Collegiate Dictionary

  • Fundamental theorem of Riemannian geometry — In Riemannian geometry, the fundamental theorem of Riemannian geometry states that on any Riemannian manifold (or pseudo Riemannian manifold) there is a unique torsion free metric connection, called the Levi Civita connection of the given metric …   Wikipedia

  • Gauss's lemma (Riemannian geometry) — In Riemannian geometry, Gauss s lemma asserts that any sufficiently small sphere centered at a point in a Riemannian manifold is perpendicular to every geodesic through the point. More formally, let M be a Riemannian manifold, equipped with its… …   Wikipedia

  • List of formulas in Riemannian geometry — This is a list of formulas encountered in Riemannian geometry.Christoffel symbols, covariant derivativeIn a smooth coordinate chart, the Christoffel symbols are given by::Gamma {ij}^m=frac12 g^{km} left( frac{partial}{partial x^i} g {kj}… …   Wikipedia

  • Isometry (Riemannian geometry) — In the study of Riemannian geometry in mathematics, a local isometry from one (pseudo )Riemannian manifold to another is a map which pulls back the metric tensor on the second manifold to the metric tensor on the first. When such a map is also a… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.