 Fluid mechanics

Continuum mechanics LawsFluid mechanicsScientistsFluid mechanics is the study of fluids and the forces on them. (Fluids include liquids, gases, and plasmas.) Fluid mechanics can be divided into fluid statics, the study of fluids at rest; fluid kinematics, the study of fluids in motion; and fluid dynamics, the study of the effect of forces on fluid motion. It is a branch of continuum mechanics, a subject which models matter without using the information that it is made out of atoms, that is, it models matter from a macroscopic viewpoint rather than from a microscopic viewpoint. Fluid mechanics, especially fluid dynamics, is an active field of research with many unsolved or partly solved problems. Fluid mechanics can be mathematically complex. Sometimes it can best be solved by numerical methods, typically using computers. A modern discipline, called computational fluid dynamics (CFD), is devoted to this approach to solving fluid mechanics problems. Also taking advantage of the highly visual nature of fluid flow is particle image velocimetry, an experimental method for visualizing and analyzing fluid flow.
Contents
Brief history
Main article: History of fluid mechanicsThe study of fluid mechanics goes back at least to the days of ancient Greece, when Archimedes investigated fluid statics and buoyancy and formulated his famous law known now as the Archimedes' Principle. Rapid advancement in fluid mechanics began with Leonardo da Vinci (observation and experiment), Evangelista Torricelli (barometer), Isaac Newton (viscosity) and Blaise Pascal (hydrostatics), and was continued by Daniel Bernoulli with the introduction of mathematical fluid dynamics in Hydrodynamica (1738). Inviscid flow was further analyzed by various mathematicians (Leonhard Euler, d'Alembert, Lagrange, Laplace, Poisson) and viscous flow was explored by a multitude of engineers including Poiseuille and Gotthilf Heinrich Ludwig Hagen. Further mathematical justification was provided by ClaudeLouis Navier and George Gabriel Stokes in the Navier–Stokes equations, and boundary layers were investigated (Ludwig Prandtl, Theodore von Kármán), while various scientists (Osborne Reynolds, Andrey Kolmogorov, Geoffrey Ingram Taylor) advanced the understanding of fluid viscosity and turbulence.
Relationship to continuum mechanics
Fluid mechanics is a subdiscipline of continuum mechanics, as illustrated in the following table.
Continuum mechanics
The study of the physics of continuous materialsSolid mechanics
The study of the physics of continuous materials with a defined rest shape.Elasticity
Describes materials that return to their rest shape after an applied stress.Plasticity
Describes materials that permanently deform after a sufficient applied stress.Rheology
The study of materials with both solid and fluid characteristics.Fluid mechanics
The study of the physics of continuous materials which take the shape of their container.NonNewtonian fluids Newtonian fluids In a mechanical view, a fluid is a substance that does not support shear stress; that is why a fluid at rest has the shape of its containing vessel. A fluid at rest has no shear stress.
Assumptions
Like any mathematical model of the real world, fluid mechanics makes some basic assumptions about the materials being studied. These assumptions are turned into equations that must be satisfied if the assumptions are to be held true. For example, consider an incompressible fluid in three dimensions. The assumption that mass is conserved means that for any fixed closed surface (such as a sphere) the rate of mass passing from outside to inside the surface must be the same as rate of mass passing the other way. (Alternatively, the mass inside remains constant, as does the mass outside). This can be turned into an integral equation over the surface.
Fluid mechanics assumes that every fluid obeys the following:
 Conservation of mass
 Conservation of energy
 Conservation of momentum
 The continuum hypothesis, detailed below.
Further, it is often useful (at subsonic conditions) to assume a fluid is incompressible – that is, the density of the fluid does not change.
Similarly, it can sometimes be assumed that the viscosity of the fluid is zero (the fluid is inviscid). Gases can often be assumed to be inviscid. If a fluid is viscous, and its flow contained in some way (e.g. in a pipe), then the flow at the boundary must have zero velocity. For a viscous fluid, if the boundary is not porous, the shear forces between the fluid and the boundary results also in a zero velocity for the fluid at the boundary. This is called the noslip condition. For a porous media otherwise, in the frontier of the containing vessel, the slip condition is not zero velocity, and the fluid has a discontinuous velocity field between the free fluid and the fluid in the porous media (this is related to the Beavers and Joseph condition).
The continuum hypothesis
Main article: Continuum mechanicsFluids are composed of molecules that collide with one another and solid objects. The continuum assumption, however, considers fluids to be continuous. That is, properties such as density, pressure, temperature, and velocity are taken to be welldefined at "infinitely" small points, defining a REV (Reference Element of Volume), at the geometric order of the distance between two adjacent molecules of fluid. Properties are assumed to vary continuously from one point to another, and are averaged values in the REV. The fact that the fluid is made up of discrete molecules is ignored.
The continuum hypothesis is basically an approximation, in the same way planets are approximated by point particles when dealing with celestial mechanics, and therefore results in approximate solutions. Consequently, assumption of the continuum hypothesis can lead to results which are not of desired accuracy. That said, under the right circumstances, the continuum hypothesis produces extremely accurate results.
Those problems for which the continuum hypothesis does not allow solutions of desired accuracy are solved using statistical mechanics. To determine whether or not to use conventional fluid dynamics or statistical mechanics, the Knudsen number is evaluated for the problem. The Knudsen number is defined as the ratio of the molecular mean free path length to a certain representative physical length scale. This length scale could be, for example, the radius of a body in a fluid. (More simply, the Knudsen number is how many times its own diameter a particle will travel on average before hitting another particle). Problems with Knudsen numbers at or above unity are best evaluated using statistical mechanics for reliable solutions.
Main article: Navier–Stokes equationsThe Navier–Stokes equations (named after ClaudeLouis Navier and George Gabriel Stokes) are the set of equations that describe the motion of fluid substances such as liquids and gases. These equations state that changes in momentum (force) of fluid particles depend only on the external pressure and internal viscous forces (similar to friction) acting on the fluid. Thus, the Navier–Stokes equations describe the balance of forces acting at any given region of the fluid.
The Navier–Stokes equations are differential equations which describe the motion of a fluid. Such equations establish relations among the rates of change of the variables of interest. For example, the Navier–Stokes equations for an ideal fluid with zero viscosity states that acceleration (the rate of change of velocity) is proportional to the derivative of internal pressure.
This means that solutions of the Navier–Stokes equations for a given physical problem must be sought with the help of calculus. In practical terms only the simplest cases can be solved exactly in this way. These cases generally involve nonturbulent, steady flow (flow does not change with time) in which the Reynolds number is small.
For more complex situations, such as global weather systems like El Niño or lift in a wing, solutions of the Navier–Stokes equations can currently only be found with the help of computers. This is a field of sciences by its own called computational fluid dynamics.
General form of the equation
The general form of the Navier–Stokes equations for the conservation of momentum is:
where
 is the fluid density,
 is the substantive derivative (also called the material derivative),
 is the velocity vector,
 is the body force vector, and
 is a tensor that represents the surface forces applied on a fluid particle (the stress tensor).
Unless the fluid is made up of spinning degrees of freedom like vortices, is a symmetric tensor. In general, (in three dimensions) has the form:
where
 are normal stresses,
 are tangential stresses (shear stresses).
The above is actually a set of three equations, one per dimension. By themselves, these aren't sufficient to produce a solution. However, adding conservation of mass and appropriate boundary conditions to the system of equations produces a solvable set of equations.
Newtonian versus nonNewtonian fluids
A Newtonian fluid (named after Isaac Newton) is defined to be a fluid whose shear stress is linearly proportional to the velocity gradient in the direction perpendicular to the plane of shear. This definition means regardless of the forces acting on a fluid, it continues to flow. For example, water is a Newtonian fluid, because it continues to display fluid properties no matter how much it is stirred or mixed. A slightly less rigorous definition is that the drag of a small object being moved slowly through the fluid is proportional to the force applied to the object. (Compare friction). Important fluids, like water as well as most gases, behave — to good approximation — as a Newtonian fluid under normal conditions on Earth.^{[1]}
By contrast, stirring a nonNewtonian fluid can leave a "hole" behind. This will gradually fill up over time – this behaviour is seen in materials such as pudding, oobleck, or sand (although sand isn't strictly a fluid). Alternatively, stirring a nonNewtonian fluid can cause the viscosity to decrease, so the fluid appears "thinner" (this is seen in nondrip paints). There are many types of nonNewtonian fluids, as they are defined to be something that fails to obey a particular property — for example, most fluids with long molecular chains can react in a nonNewtonian manner.^{[1]}
Equations for a Newtonian fluid
Main article: Newtonian fluidThe constant of proportionality between the shear stress and the velocity gradient is known as the viscosity. A simple equation to describe Newtonian fluid behaviour is
where
 τ is the shear stress exerted by the fluid ("drag")
 μ is the fluid viscosity – a constant of proportionality
 is the velocity gradient perpendicular to the direction of shear.
For a Newtonian fluid, the viscosity, by definition, depends only on temperature and pressure, not on the forces acting upon it. If the fluid is incompressible and viscosity is constant across the fluid, the equation governing the shear stress (in Cartesian coordinates) is
where
 τ_{ij} is the shear stress on the i^{th} face of a fluid element in the j^{th} direction
 v_{i} is the velocity in the i^{th} direction
 x_{j} is the j^{th} direction coordinate.
If a fluid does not obey this relation, it is termed a nonNewtonian fluid, of which there are several types.
Among fluids, two rough broad divisions can be made: ideal and nonideal fluids. An ideal fluid really does not exist, but in some calculations, the assumption is justifiable. An Ideal fluid is non viscous offers no resistance whatsoever to a shearing force.
One can group real fluids into Newtonian and nonNewtonian. Newtonian fluids agree with Newton's law of viscosity. NonNewtonian fluids can be either plastic, bingham plastic, pseudoplastic, dilatant, thixotropic, rheopectic, viscoelatic.
See also
Notes
References
 Batchelor, George K. (1967), An Introduction to Fluid Dynamics, Cambridge University Press, ISBN 0521663962
 Falkovich, Gregory (2011), Fluid Mechanics (A short course for physicists), Cambridge University Press, ISBN 9781107005754
 Kundu, Pijush K.; Cohen, Ira M. (2008), Fluid Mechanics (4th revised ed.), Academic Press, ISBN 9780123737359
 Currie, I. G. (1974), Fundamental Mechanics of Fluids, McGrawHill, Inc., ISBN 0070150001
 Massey, B.; WardSmith, J. (2005), Mechanics of Fluids (8th ed.), Taylor & Francis, ISBN 9780415362061
 White, Frank M. (2003), Fluid Mechanics, McGraw–Hill, ISBN 0072402172
External links
 Free Fluid Mechanics books
 Fluid Mechanics webpage by Falkovich
 Annual Review of Fluid Mechanics
 CFDWiki – the Computational Fluid Dynamics reference wiki.
 Educational Particle Image Velocimetry – resources and demonstrations
 prof. DSc Ivan Antonov, Technical University of Sofia, Bulgaria.
Branches of physics Acoustics • Agrophysics (Soil physics) • Astrophysics • Atmospheric physics • Atomic, molecular, and optical physics • Biophysics (Medical physics · Neurophysics) • Chemical physics • Condensed matter physics • Econophysics • Electromagnetism • Geophysics • Mechanics (Classical mechanics · Continuum mechanics · Quantum mechanics · Fluid mechanics · Thermodynamics · Biomechanics) • Nuclear physics • Optics • Particle physics • Quantum field theory • Relativity (Special relativity · General relativity)Concepts Unit operations Unit process Branches Process design · Fluid mechanics · Chemical plant Design · Chemical thermodynamics · Transport phenomena · *More*Others Outline of chemical engineering · Index of chemical engineering articles · Education for Chemical Engineers · List of chemical engineers · List of chemical engineering societies · List of chemical process simulatorsCategory · Portal:Engineering Categories:
Wikimedia Foundation. 2010.
Look at other dictionaries:
fluid mechanics — n. the study of the pressures, velocities, etc. of liquids and gases when they are in motion or at rest … English World dictionary
fluid mechanics — an applied science dealing with the basic principles of gaseous and liquid matter. Cf. fluid dynamics. [1940 45] * * * Study of the effects of forces and energy on liquids and gases. One branch of the field, hydrostatics, deals with fluids at… … Universalium
fluid mechanics — hidroaeromechanika statusas T sritis Standartizacija ir metrologija apibrėžtis Mokslas, tiriantis skysčių arba dujų pusiausvyrą, judėjimą, jų ir kietojo kūno sąveiką. atitikmenys: angl. fluid mechanics vok. Strömungsmechanik, f rus.… … Penkiakalbis aiškinamasis metrologijos terminų žodynas
fluid mechanics — hidroaeromechanika statusas T sritis chemija apibrėžtis Mokslas, tiriantis skysčių (dujų) pusiausvyrą, judėjimą, skysčio (dujų) ir kietojo kūno sąveiką. atitikmenys: angl. fluid mechanics rus. гидроаэромеханика … Chemijos terminų aiškinamasis žodynas
fluid mechanics — skysčių ir dujų mechanika statusas T sritis fizika atitikmenys: angl. fluid mechanics vok. Mechanik der Flüssigkeiten und Gase, f; Strömungsmechanik, f rus. механика жидкостей и газов, f pranc. mécanique des fluides, f … Fizikos terminų žodynas
fluid mechanics — noun study of the mechanics of fluids • Syn: ↑hydraulics • Derivationally related forms: ↑hydraulic (for: ↑hydraulics) • Hypernyms: ↑mechanics … Useful english dictionary
fluid mechanics — noun plural but singular or plural in construction Date: 1937 a branch of mechanics dealing with the properties of liquids and gases … New Collegiate Dictionary
fluid mechanics — noun The branch of mechanics dealing with gases and liquids, either at rest or in motion … Wiktionary
fluid mechanics — applied science embodying the basic principles of gaseous and liquid flow … English contemporary dictionary
fluid mechanics — plural noun [treated as sing.] the study of forces and flow within fluids … English new terms dictionary