A setback, sometimes called step-back, is a step-like recession in a
wall. Setbacks were initially used for structural reasons, but now are often mandated by land use codes.
Setbacks were used by ancient builders to increase the height of
masonrystructures by distributing gravity loads produced by the building material such as clay, stone or brick. This was achieved by regularly reducing the footprint of each level located successively farther from the ground. Setbacks also allowed the natural erosion to occur without compromising the structural integrity of the building. The most graphic example of a setback technique is the step pyramids of Mesopotamiaand Ancient Egypt, such as the Teppe Sialk ziggurat or the Pyramid of Djoser.
For centuries, setbacks were a structural necessity for virtually all multi-level load-bearing
masonrybuildings and structures. As architects learned how to turn setbacks into an architectural feature, most setbacks were however less pronounced than in step pyramids and often skillfully masked by rich ornamentation.
The introduction of a
steel framestructural system in the late 19th century eliminated the need for structural setbacks. The use of a frame building technology combined with conveniences such as elevators and motorized water pumps influenced the physical growth and density of buildings in large cities. Driven by the desire to maximize the usable floor area, some developers avoided the use of setbacks, creating in many instances a range of fire safety and health hazards. Thus, the 42-story Equitable Building, constructed in New York in 1915, produced a huge shadow, which effectively deprived neighboring properties of sun light.
etbacks and urban planning
jurisdictions rely on urban planningregulations, such as zoning ordinances, which use setbacks to make sure that streets and yards are provided more open space and adequate light and air. For example, in high density districts, such as Manhattanin New York, front walls of buildings at the street linemay be limited to a specified height or number of stories. Above that height, the buildings are required to set back behind a theoretical inclined plane, called "sky exposure plane", which cannot be penetrated by the building's exterior wall. For the same reason, setbacks may also be used in lower density districts to limit the height of perimeter walls above which a building must have a pitched roof or be set back before rising to the permitted height.
In addition, setbacks promote fire safety by spacing buildings and their protruding parts away from each other and allow for passage of firefighting apparatus between buildings.
United States, setback requirements vary among municipalities. For example, the absence of sky exposure plane provisions in the Chicago Zoning Code makes the Chicago skylinequite different from the skyline of New York where construction of tall buildings was guided by the zoning ordinance since 1916. The New York City Zoning Ordinance also provided another kind of setback guideline, one that was intended to increase the amount of public space in the city. This was achieved by increasing the minimum setback at street level, creating in each instance an open space, often referred to as plaza, in front of the building.
*"Delirious New York", by Rem Koolhaas. Monacceli Press, reprint 1997.
*"A Pattern Language", by Christopher Alexander. Oxford University Press, 1977.
*http://www.nyc.gov/html/dcp/html/zone/zonehis.shtml NYC Zoning History
Wikimedia Foundation. 2010.
Look at other dictionaries:
Setback — may have the following meanings:* a problem * Setback (land use), the distance a structure must be from the edge of a lot * Setback (architecture), making upper storeys of a high rise further back than the lower ones for aesthetic, structural, or … Wikipedia
Setback (land use) — This article is about minimum distances between buildings and the lot line. For regulations regarding step like recessions in walls, which accomplish many of the same goals, see Setback (architecture).In land use, a setback is the distance which… … Wikipedia
Architecture of the night — De Volharding Building, The Hague, 1928 by Jan Buijs, photographed in 1930 … Wikipedia
Architecture of New York City — The Empire State Building (foreground) and Chrysler Building are some of the finest examples of Art Deco architecture A building form closely associated with New York City is the skyscraper, which has controversially shifted many commercial and… … Wikipedia
setback — /set bak /, n. 1. a check to progress; a reverse or defeat: The new law was a setback. 2. Archit. a recession of the upper part of a building from the building line, as to lighten the structure or to permit a desired amount of light and air to… … Universalium
architecture — /ahr ki tek cheuhr/, n. 1. the profession of designing buildings, open areas, communities, and other artificial constructions and environments, usually with some regard to aesthetic effect. Architecture often includes design or selection of… … Universalium
Architecture of the United States — The Architecture of the United States includes a wide variety of architectural styles over its history. Architecture in the US is regionally diverse and has been shaped by many external forces, and can therefore be said to be eclectic, something… … Wikipedia
architecture — I (New American Roget s College Thesaurus) Building design Nouns 1. architectural or building design, form; architectural or structural engineering; landscape architecture or gardening; architectonics. See building. 2. (architectural styles) a.… … English dictionary for students
setback — noun 1》 a reversal or check in progress. 2》 Architecture a plain, flat offset in a wall. 3》 N. Amer. the distance by which a building is set back from the property line … English new terms dictionary
setback — /ˈsɛtbæk/ (say setbak) noun 1. a check to progress; reverse. 2. Architecture a. a flat, plain offset in a wall. b. such a setting back at a particular height in a tall building, or one of a number of such recessions at different heights, for… … Australian English dictionary