Drift pin


Drift pin
drift punch

In metalworking, a drift pin, drift pin punch, or simply drift, is the name for a tool used for enlarging holes, or aligning holes prior to bolting or riveting metal parts together. A drift pin is not used as a punch in the traditional sense of the term. A drift pin is used as an aid in aligning bolt or rivet holes prior to inserting a fastener. A drift punch is constructed as a tapered rod, with the hammer acting on the large end of the taper. The tapered end of a drift punch is placed into the semi-aligned bolt holes of two separate components, and then driven into the hole. As it is driven in, the taper forces the two components into alignment, allowing for easy insertion of the fastener. Unlike most punches, force should never be applied to the tip of drift pin.

Drift pins are especially useful for aligning fastener holes in structural steel members. Spud wrenches used for assembling trusses and steel beams have tapered handles to use as drift pins.

See also

References



Wikimedia Foundation. 2010.

Look at other dictionaries:

  • drift pin — drift pin, a smooth, tapered punch or guiding tool, used to draw adjacent pieces together to align holes for rivets or bolts. * * * n. a steel pin driven into a hole in a piece of metal to enlarge, shape, or align the hole …   Useful english dictionary

  • Drift — may mean: Contents 1 Film and literature 2 Geography 3 Industry …   Wikipedia

  • pin punch — A tool with a parallel shaft for use with a hammer to drive out pins, shafts, rivets, etc. Compare drift punch) …   Dictionary of automotive terms

  • Chris van der Drift — Nationality …   Wikipedia

  • Ho-Pin Tung — Tung competing for A1 Team China at the 2008–09 A1 Grand Prix of Nations, South Africa Nationality …   Wikipedia

  • driftpin — /drift pin /, n. 1. driftbolt (def. 1). 2. drift (def. 17a). [1870 75; DRIFT + PIN] * * * …   Universalium

  • Punch (tool) — For punches used in punch presses, see Punching. A punch is a hard metal rod with a shaped tip at one end and a blunt butt end at the other, which is usually struck by a hammer. Punches are used to drive objects, such as nails, or to form an… …   Wikipedia

  • Punch (metalworking) — A punch is a hard metal rod with a shaped tip at one end and a blunt butt end at the other that is usually struck by a hammer. A variety of punches are used in engineering, but often the purpose is to form an impression of the tip on a workpiece …   Wikipedia

  • driftpin — noun : drift I 4e, 4g * * * /drift pin /, n. 1. driftbolt (def. 1). 2. drift (def. 17a). [1870 75; DRIFT + PIN] * * * driftˈpin see ↑drift (n) above …   Useful english dictionary

  • Marking gauge — Stanley and Veritas marking gauges A marking gauge, also known as a scratch gauge,[1] is used in woodworking and metalworking to mark out lines for cutting or other operations.[2] …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.