Offshore wind power

Offshore wind power refers to the construction of wind farms in bodies of water to generate electricity from wind. Better wind speeds are available offshore compared to on land, so offshore wind power’s contribution in terms of electricity supplied is higher.[1]

Siemens, REpower, and Vestas are the leading turbine suppliers for offshore wind power. Dong Energy, Vattenfall and E.on are the leading offshore operators.[1] As of October 2010, 3.16 GW of offshore wind power capacity was operational, mainly in Northern Europe. According to BTM Consult, more than 16 GW of additional capacity will be installed before the end of 2014 and the United Kingdom and Germany will become the two leading markets. Offshore wind power capacity is expected to reach a total of 75 GW worldwide by 2020, with significant contributions from China and the United States.[1]

Contents

Definition

Offshore wind power refers to the construction of wind farms in bodies of water to generate electricity from wind. Unlike the term typical usage of the term "offshore" in the marine industry, offshore wind power includes inshore water areas such as lakes, fjords and sheltered coastal areas, utilizing traditional fixed-bottom wind turbine technologies, as well as deep-water areas utilizing floating wind turbines.

History

Europe is the world leader in offshore wind power, with the first offshore wind farm being installed in Denmark in 1991.[2] In 2008, offshore wind power contributed 0.8 gigawatt (GW) of the total 28 GW of wind power capacity constructed that year.[3] By October 2009, 26 offshore wind farms had been constructed in Europe with an average rated capacity of 76 MW,[4] and as of 2010 the United Kingdom has by far the largest capacity of offshore wind farms with 1.3 GW, more than the rest of the world combined at 1.1 GW[5] The UK is followed by Denmark (854 MW), The Netherlands (249 MW), Belgium (195 MW), Sweden (164 MW), Germany (92 MW), Ireland (25 MW), Finland (26 MW) and Norway with 2.3 MW.[6]

As of October 2010, Danish wind turbine manufacturers Siemens Wind Power and Vestas have installed 91.8% of the world's 3.16 GW offshore wind power capacity, although REpower is now starting to become a major player. Based on current orders, BTM expects 15 GW more between 2010 and 2014.[7]

Offshore wind farms

Offshore wind turbines near Copenhagen.

As of 2010, there are 39 European offshore wind farms in waters off Belgium, Denmark, Finland, Germany, Ireland, the Netherlands, Norway, Sweden and the United Kingdom, with an operating capacity of 2,396 MW. More than 100 GW (or 100, 000 MW) of offshore projects are proposed or under development in Europe. The European Wind Energy Association has set a target of 40 GW installed by 2020 and 150 GW by 2030.[2]

As of November 2010, the Thanet Offshore Wind Project in United Kingdom is the largest offshore wind farm in the world at 300 MW, followed by Horns Rev II (209 MW) in Denmark.

World's largest offshore wind farms
Wind farm Capacity (MW) Country Turbines and model Commissioned References
Thanet 300  United Kingdom 100 × Vestas V90-3MW 2010 [8][9]
Horns Rev II 209  Denmark 91 × Siemens 2.3-93 2009 [10]
Rødsand II 207  Denmark 90 × Siemens 2.3-93 2010 [11]
Lynn and Inner Dowsing 194  United Kingdom 54 × Siemens 3.6-107 2008 [12][13][14][15]
Walney 1 184  United Kingdom 51 × Siemens SWT-3.6-107 2011 [16]
Robin Rigg (Solway Firth) 180  United Kingdom 60 × Vestas V90-3MW 2010 [17][18]
Gunfleet Sands 172  United Kingdom 48 × Siemens 3.6-107 2010 [18][19]
Ormonde 150  United Kingdom 30 × REpower 5M 2011 [18][20]

In Europe, as of June 2011, there were 1,247 grid-connected offshore wind turbines with a total capacity of 3,294 MW in 49 wind farms spread over nine countries. Offshore wind farms worth some €8.5 billion ($11.4 billion) are currently under construction in European waters. Once completed, they will represent an additional installed capacity of 2844 MW.[21]

The province of Ontario in Canada is pursuing several proposed locations in the Great Lakes, including the suspended[22] Trillium Power Wind 1 approximately 20 km from shore and over 400 MW in size.[23] Other Canadian projects include one on the Pacific west coast.[24]

As of 2010, there are no offshore wind farms in the United States. However, projects are under development in wind-rich areas of the East Coast, Great Lakes, and Pacific coast.[2]

Economics and benefits

Most entities and individuals active in offshore wind power believe that prices of electricity will grow significantly from 2009, as global efforts to reduce carbon emissions come into effect. BTM expects cost per kWh to fall from 2014,[7] and that the resource will always be more than adequate in the three areas Europe, United States and China.[1]

Offshore wind power can help to reduce energy imports, reduce air pollution and greenhouse gases (by displacing fossil-fuel power generation), meet renewable electricity standards, and create jobs and local business opportunities.[2]

The current state of offshore wind power presents economic challenges significantly greater than onshore systems - prices can be in the range of 2.5-3.0 million Euro/MW. The turbine represents just one third to one half[25] of costs in offshore projects today, the rest comes from infrastructure, maintenance, and oversight. Larger turbines with increased energy capture make more economic sense due to the extra infrastructure in offshore systems. Additionally, there are currently no rigorous simulation models of external effects on offshore wind farms, such as boundary layer stability effects and wake effects. This causes difficulties in predicting performance accurately, a critical shortcoming in financing billion-dollar offshore facilities. A report from a coalition of researchers from universities, industry, and government, lays out several things needed in order to bring the costs down and make offshore wind more economically viable:

  • Improving wind performance models, including how design conditions and the wind resource are influenced by the presence of other wind farms.
  • Reducing the weight of turbine materials
  • Eliminating problematic gearboxes
  • Turbine load-mitigation controls and strategies
  • Turbine and rotor designs to minimize hurricane and typhoon damage
  • Economic modeling and optimization of costs of the overall wind farm system, including installation, operations, and maintenance
  • Service methodologies, remote monitoring, and diagnostics. [26]

Technical details

In 2009, the average nameplate capacity of an offshore wind turbine in Europe was about 3 MW, and the capacity of future turbines is expected to increase to 5 MW.[2]

Offshore turbines require different types of bases for stability, according to the depth of water. To date a number of different solutions exist:

  • A monopile (single column) base, six meters in diameter, is used in waters up to 30 meters deep.
  • Gravity Base Structures, for use at exposed sites in water 20- 80 m deep.
  • Tripod piled structures, in water 20-80 metres deep.
  • Tripod suction caisson structures, in water 20-80m deep.
  • Conventional steel jacket structures, as used in the oil and gas industry, in water 20-80m deep.
  • Floating wind turbines are being developed for deeper water.[2][27]

Turbines are much less accessible when offshore (requiring the use of a service vessel for routine access, and a jackup rig for heavy service such as gearbox replacement), and thus reliability is more important than for an onshore turbine.[1] A maintenance organization performs maintenance and repairs of the components, spending almost all its resources on the turbines. Access to turbines is by helicopter or service access vessel. Some wind farms located far from possible onshore bases have service teams living on site in offshore accommodation units.[28]

Because of their remote nature, prognosis and health-monitoring systems on offshore wind turbines will be come much more necessary. They would enable better planning just-in-time maintenance, thereby reducing the operations and maintenance costs. According to a report from a coalition of researchers from universities, industry, and government, supported by the Atkinson Center for a Sustainable Future, [29]making field data from these turbines available would be invaluable in validating complex analysis codes used for turbine design. Reducing this barrier would contribute to the education of engineers specializing in wind energy.

The planning and permitting phase can cost more than $10 million, take 5–7 years and have an uncertain outcome. The industry puts pressure on the governments to improve the processes.[30][31] In Denmark, many of these phases have been deliberately streamlined by authorities in order to minimize hurdles.[32]

Some of the guidelines for designing offshore wind farms are IEC 61400-3.[33][34]

Design Environment

Offshore wind resource characteristics span a range of spatial and temporal scales and field data on external conditions. Necessary data includes water depth, currents, seabed, migration, and wave action, all of which drive mechanical and structural loading on potential turbine configurations. Other factors include marine growth, salinity, icing, and the geotechnical characteristics of the sea or lake bed. A number of things are necessary in order to attain the necessary information on these subjects. Existing hardware fore these measurements includes Light Detection and Ranging (LIDAR), Sonic Detection and Ranging (SODAR), radar, autonomous underwater vehicles (AUV), and remote satellite sensing, although these technologies should be assessed and refined, according to a report from a coalition of researchers from universities, industry, and government, supported by the Atkinson Center for a Sustainable Future. [35]

Because of the previous factors, one of the biggest difficulties with offshore wind farms is the ability to predict loads. Analysis must account for the dynamic coupling between translational (surge, sway, and heave) and rotational (roll, pitch, and yaw) platform motions and turbine motions, as well as the dynamic characterization of mooring lines for floating systems. Foundations and substructures make up a large fraction of offshore wind systems, and must take into account every single one of these factors. [36]

Aesthetics

Offshore Wind Turbines in Femern Belt, photograph taken from the sky in 2010, on the fly line between Marseille and Stockholm.

Offshore wind turbines are less obtrusive than turbines on land, as their apparent size and noise is mitigated by distance. A 2006 Survey by the University of Delaware near the proposed Cape Wind development found that residents most frequently based their decisions to support or oppose the wind farm on perceived impacts to marine life, the environment, electricity rates, aesthetics, fishing and boating.[37]

See also

References

  1. ^ a b c d e Madsen & Krogsgaard. Offshore Wind Power 2010 BTM Consult, 22 November 2010. Retrieved: 22 November 2010.
  2. ^ a b c d e f Environmental and Energy Study Institute (October 2010). "Offshore Wind Energy". http://www.eesi.org/files/offshore_wind_101310.pdf. 
  3. ^ http://www.bwea.com/pdf/publications/CapReport.pdf
  4. ^ Offshore Wind Energy, The Windenergie-Agentur Bremerhaven/Bremen, 2009 Issue.
  5. ^ UK reaches 5GW of installed wind landmark New Energy Focus / BWEA, 23 September 2010. Retrieved: 8 November 2010.
  6. ^ "Offshore Wind Booming in Europe". Renewable Energy World. January 20, 2011. http://www.renewableenergyworld.com/rea/news/article/2011/01/offshore-wind-booming-in-europe??cmpid=WNL-Friday-January21-2011. 
  7. ^ a b Madsen & Krogsgaard. Press offshore (in Danish) BTM Consult, 22 November 2010. Retrieved: 22 November 2010.
  8. ^ "Thanet". The Engineer Online. 2008-07-25. http://www.theengineer.co.uk/Articles/308825/Wind+farm+project.htm. Retrieved 2008-11-26. 
  9. ^ "Thanet offshore wind farm starts electricity production". BBC News. 23 September 2010. http://www.bbc.co.uk/news/technology-11395824. Retrieved 2010-09-34. 
  10. ^ Horns Rev II turbines
  11. ^ E.ON finishes Rødsand II Business Week, 14 July 2010. Retrieved: 11 September 2010.
  12. ^ Operational offshore wind farms in Europe, end 2009 EWEA. Retrieved: 23 October 2010.
  13. ^ Interactive Map for Marine Estate
  14. ^ Interactive Map for Marine Estate
  15. ^ Wind farm's first turbines active
  16. ^ Datasheet for site: Walney 1 Offshore wind farm. LORC Knowledge, 2011
  17. ^ Interactive Map for Marine Estate
  18. ^ a b c [1] UK Wind Energy Database
  19. ^ Interactive Map for Marine Estate
  20. ^ Map for Marine Estate
  21. ^ "Wind Energy Markets: Experts See Solid Offshore Growth". Renewable Energy World. 30 September 2011. http://www.renewableenergyworld.com/rea/news/article/2011/09/wind-energy-markets-solid-offshore-growth. 
  22. ^ Offshore wind development hits a snag in Ontario Alberta Oil Magazine, April 2011. Accessed: 29 September 2011.
  23. ^ Hamilton, Tyler (January 15, 2008). "Ontario to approve Great Lakes wind power". The Star (Toronto). http://www.thestar.com/article/294044. Retrieved 2008-05-02. 
  24. ^ "Naikun Wind Development, Inc.". http://www.naikun.ca/index.php. Retrieved 2008-05-21. 
  25. ^ Lindvig, Kaj. The installation and servicing of offshore wind farms p6 A2SEA, 16 September 2010. Accessed: 9 October 2011.
  26. ^ Zehnder and Warhaft, Alan and Zellman. "University Collaboration on Wind Energy". Cornell University. http://www.sustainablefuture.cornell.edu/attachments/2011-UnivWindCollaboration.pdf. Retrieved 17 August 2011. 
  27. ^ "Support structure concepts for offshore wind turbines". LORC Knowledge. 2011-03-14. http://www.lorc.dk/Knowledge/Wind/Support-structures. Retrieved 2011-06-01. 
  28. ^ Accommodation Platform DONG Energy, February 2010. Retrieved: 22 November 2010.
  29. ^ Zehnder and Warhaft, Alan and Zellman. "University Collaboration on Wind Energy". Cornell University. http://www.sustainablefuture.cornell.edu/attachments/2011-UnivWindCollaboration.pdf. Retrieved 17 August 2011. 
  30. ^ http://www.newjerseynewsroom.com/commentary/nj-must-make-wind-farm-permitting-process-as-quick-and-easy-as-possible
  31. ^ http://www.ieawind.org/Annex%20XXIII/Subtask1.html
  32. ^ Streamline Renewable Energy Policy and make Australia a World Leader Energy Matters, 11 August 2010. Retrieved: 6 November 2010.
  33. ^ International Standard IEC 61400-3 International Electrotechnical Commission, August 2005. Accessed: 12 March 2011.
  34. ^ Quarton, D.C. An international design standard for offshore wind turbines: IEC 61400-3 Garrad Hassan, 2005. Accessed: 12 March 2011.
  35. ^ Zehnder and Warhaft, Alan and Zellman. "University Collaboration on Wind Energy". Cornell University. http://www.sustainablefuture.cornell.edu/attachments/2011-UnivWindCollaboration.pdf. Retrieved 17 August 2011. 
  36. ^ Zehnder and Warhaft, Alan and Zellman. "University Collaboration on Wind Energy". Cornell University. http://www.sustainablefuture.cornell.edu/attachments/2011-UnivWindCollaboration.pdf. Retrieved 17 August 2011. 
  37. ^ http://www.eesi.org/files/offshore_wind_101310.pdf

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Wind power in the United Kingdom — passed the milestone of 2 GW installed capacity on 9 February 2007 with the opening of the Braes O Doune wind farm, near Stirling. [http://news.bbc.co.uk/1/hi/sci/tech/6344215.stm BBC NEWS | Science/Nature | UK wind power reaches milestone ] ]… …   Wikipedia

  • Wind power — Wind power: worldwide installed capacity [1] …   Wikipedia

  • Wind power in Spain — Spain is one of the three world’s largest users of wind power with an installed capacity of 15,515 MW at January 2008.cite web | url=http://www.energias renovables.com/paginas/Contenidosecciones.asp?ID=14 Cod=12262 Tipo= Nombre=Noticias |… …   Wikipedia

  • Wind power in Germany — Germany is the world’s largest user of wind power with an installed capacity of 22,3 GW in 2007, ahead of USA which had an installed capacity of 16,8 GW. [cite web | title = Global wind 2007 report | publisher = Global Wind Energy Council | date …   Wikipedia

  • Wind power in Denmark — Wind power provided 19.7 percent of the Denmark s electricity in 2007, a significantly higher proportion than in any other country.cite web | title= Danish Annual Energy Statistics |url= http://www.energistyrelsen.dk/graphics/UK Facts… …   Wikipedia

  • Wind power in Scotland — is an area of considerable activity. Wind power is the fastest growing of the renewable energy technologies in Scotland and the world s largest wind turbine generator (5 MW) is currently undergoing testing in the North Sea, 15 miles off the east… …   Wikipedia

  • Wind power in the United States — is a growing industry. In 2007, the United States was the fastest growing wind power market in the world for the third year in a row [http://www.nrel.gov/docs/fy08osti/43025.pdf Annual Report on U.S. Wind Power Installation] ] . At the end of… …   Wikipedia

  • wind power — /wind/ power derived from wind: used to generate electricity or mechanical power. Also called wind energy. [1900 05] * * * Use of the energy in winds to produce power. Though wind is irregular and spread out, it contains tremendous amounts of… …   Universalium

  • Wind power in Canada — as of January 2008 amounted to an installed capacity of 1856 MW, [cite web | title=Canada’s Current Installed Capacity | work=Canadian Wind Energy Association | url=http://www.canwea.ca/images/uploads/File/fiche a 29 janv 08.pdf | format=pdf |… …   Wikipedia

  • Wind power in Estonia — amounts to an installed capacity of 58.1 MW [ [http://www.tuuleenergia.ee/?path=0x139x173 Estonian Wind Power Association] ] , whilst roughly 399 MW worth of projects are currently being developed. All wind farms as of now are on land, offshore… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.