Comparison of Unicode encodings

This article compares Unicode encodings. Two situations are considered: 8-bit-clean environments and environments that forbid use of byte values that have the high bit set. Originally such prohibitions were to allow for links that used only seven data bits, but they remain in the standards and so software must generate messages that comply with the restrictions. Standard Compression Scheme for Unicode and Binary Ordered Compression for Unicode are excluded from the comparison tables because it is difficult to simply quantify their size.

Contents

Compatibility issues

A UTF-8 file that contains only ASCII characters is identical to an ASCII file. Legacy programs can generally handle UTF-8 encoded files even if they contain non-ASCII characters. For instance the C printf function can print a UTF-8 format string, as it only looks for the byte matching the ASCII '%' character and prints all other bytes unchanged, thus any UTF-8 (which never contains a '%' byte) will be copied unchanged to the output.

UTF-16 and UTF-32 are incompatible with ASCII files, and thus require Unicode-aware programs to display, print and manipulate them, even if the file is known to contain only characters in the ASCII subset. Because they contain many zero bytes, the strings cannot be manipulated by normal null-terminated string handling for even simple operations such as copy.

Therefore even most UTF-16 systems such as Windows and Java store text files such as program code with 8-bit encodings (ASCII, ISO-8859-1[citation needed], or UTF-8), not UTF-16. One of the few counterexamples of a UTF-16 file is the "strings" file used by Mac OS X (10.3 and later) applications for lookup of internationalized versions of messages, these default to UTF-16 and "files encoded using UTF-8 are not guaranteed to work. When in doubt, encode the file using UTF-16"[1]. This is because the default string class in Mac OS X (NSString) stores characters in UTF-16[2].

XML is by default encoded as UTF-8, and all XML processors must at least support UTF-8 (including US-ASCII by definition) and UTF-16.[3]

Size issues

UTF-32/UCS-4 requires four bytes to encode any character. Since characters outside the basic multilingual plane (BMP) are typically rare, a document encoded in UTF-32 will often be nearly twice as large as its UTF-16/UCS-2–encoded equivalent because UTF-16 uses two bytes for the characters inside the BMP, or four bytes otherwise.

UTF-8 uses between one and four bytes to encode a character. It requires one byte for ASCII characters, making it half the space of UTF-16 for texts consisting only of ASCII. For other Latin characters and many non-Latin scripts it requires two bytes, the same as UTF-16. Only a few frequently used Western characters in the range U+0800 to U+FFFF, such as the € sign U+20AC, require three bytes in UTF-8. Characters outside of the BMP above U+FFFF need four bytes in UTF-8 and UTF-16.

The conservation of bytes in encoding files to a Unicode transformation format (UTF) depends on encoded code points, namely, blocks from which those code points are drawn. Say, it depends on the scripts in use. For example, UTF-16 use less space than UTF-32 only for characters from BMP, which are though overwhelmingly most common of all Unicode. In the same way using characters predominantly from the UTF-8 scripts makes UTF-8 more space efficient than UTF-16. The UTF-8 scripts are those scripts where UTF-8 only requires fewer than three bytes per character (only one byte for the ASCII-equivalent Basic Latin block, digits and most punctuation marks) and include: Latin, Greek, Cyrillic, Armenian, Hebrew, Arabic, Syriac, Thaana, N'Ko, and the IPA and other Latin-based phonetic alphabets.

All printable characters in UTF-EBCDIC use at least as many bytes as in UTF-8, and most use more, due to a decision made to allow encoding the C1 control codes as single bytes.

For seven-bit environments, UTF-7 is more space efficient than the combination of other Unicode encodings with quoted-printable or base64 for almost all types of text (see "Seven bit environments" below).

Processing issues

For processing, a format should be easy to search, truncate, and generally process safely. All normal Unicode encodings use some form of fixed size code unit. Depending on the format and the code point to be encoded, one or more of these code units will represent a Unicode code point. To allow easy searching and truncation, a sequence must not occur within a longer sequence or across the boundary of two other sequences. UTF-8, UTF-16, UTF-32 and UTF-EBCDIC have these important properties but UTF-7 and GB 18030 do not.

Fixed-size characters can be helpful, but even if there is a fixed byte count per code point (as in UTF-32), there is not a fixed byte count per displayed character due to combining characters. If you are working with a particular API heavily and that API has standardised on a particular Unicode encoding, it is generally a good idea to use the encoding that the API does to avoid the need to convert before every call to the API. Similarly if you are writing server-side software, it may simplify matters to use the same format for processing that you are communicating in.

UTF-16 is popular because many APIs date to the time when Unicode was 16-bit fixed width. However, using UTF-16 makes characters outside the Basic Multilingual Plane a special case which increases the risk of oversights related to their handling. That said, programs that mishandle surrogate pairs probably also have problems with combining sequences, so using UTF-32 is unlikely to solve the more general problem of poor handling of multi-code-unit characters.

If any stored data is in UTF-8 (such as file contents or names), it is very difficult to write a system that uses UTF-16 or UTF-32 as an api. This is due to the often-overlooked fact that the byte array used by UTF-8 can physically contain invalid sequences. For instance it is impossible to fix an invalid UTF-8 filename using a UTF-16 api, as no possible UTF-16 string will translate to that invalid filename. The opposite is not true, it is trivial to translate invalid UTF-16 to a unique (though technically invalid) UTF-8 string, so a UTF-8 API can control both UTF-8 and UTF-16 files and names, making UTF-8 preferred in any such mixed environment. (An unfortunate but far more common "solution" used by UTF-16 systems is to interpret the UTF-8 as some other encoding such as cp1252 and ignore the mojibake for any non-ASCII data)

For communication and storage

UTF-16 and UTF-32 are not byte oriented, so a byte order must be selected when transmitting them over a byte-oriented network or storing them in a byte-oriented file. This may be achieved by standardising on a single byte order, by specifying the endianness as part of external metadata (for example the MIME charset registry has distinct UTF-16BE and UTF-16LE registrations) or by using a byte-order mark at the start of the text. UTF-8 is byte-oriented and does not have this problem.

If the byte stream is subject to corruption then some encodings recover better than others. UTF-8 and UTF-EBCDIC are best in this regard as they can always resynchronize at the start of the next code point, GB 18030 is unable to recover after a corrupt or missing byte until the next ASCII non-number. UTF-16 and UTF-32 will handle corrupt (altered) bytes by resynchronizing on the next good code point, but an odd number of lost or spurious byte (octet)s will garble all following text.

In detail

The tables below list the number of bytes per code point for different Unicode ranges. Any additional comments needed are included in the table. The figures assume that overheads at the start and end of the block of text are negligible.

N.B. The tables below list numbers of bytes per code point, not per user visible "character" (or "grapheme cluster"). It can take multiple code points to describe a single grapheme cluster, so even in UTF-32, care must be taken when splitting or concatenating strings.

Eight-bit environments

Code range (hexadecimal) UTF-8 UTF-16 UTF-32 UTF-EBCDIC GB 18030
000000 – 00007F 1 2 4 1 1
000080 – 00009F 2 2 for characters inherited from
GB 2312/GBK (e.g. most
Chinese characters) 4 for
everything else.
0000A0 – 0003FF 2
000400 – 0007FF 3
000800 – 003FFF 3
004000 – 00FFFF 4
010000 – 03FFFF 4 4 4
040000 – 10FFFF 5

Seven-bit environments

This table may not cover every special case and so should be used for estimation and comparison only. To accurately determine the size of text in an encoding, see the actual specifications.

Code range (hexadecimal) UTF-7 UTF-8 quoted-
printable
UTF-8 base64 UTF-16 q.-p. UTF-16 base64 GB 18030 q.-p. GB 18030 base64
ASCII
graphic characters
(except U+003D “=”)
1 for "direct characters" (depends on the encoder setting for some code points), 2 for U+002B “+”, otherwise same as for 000080 – 00FFFF 1 1⅓ 4 2⅔ 1 1⅓
00003D (equals sign) 3 6 3
ASCII
control characters:
000000 – 00001F
and 00007F
as above, depending on directness 1 or 3 depending on directness 1 or 3 depending on directness
000080 – 0007FF 5 for an isolated case inside a run of single byte characters. For runs 2⅔ per character plus padding to make it a whole number of bytes plus two to start and finish the run 6 2⅔ 2–6 depending on if the byte values need to be escaped 4–6 for characters inherited from GB2312/GBK (e.g.
most Chinese characters) 8 for everything else.
2⅔ for characters inherited from GB2312/GBK (e.g.
most Chinese characters) 5⅓ for everything else.
000800 – 00FFFF 9 4
010000 – 10FFFF 8 for isolated case, 5⅓ per character plus padding to integer plus 2 for a run 12 5⅓ 8–12 depending on if the low bytes of the surrogates need to be escaped. 5⅓ 8 5⅓

Size of codes for UTF-16 do not differ for -LE and -BE versions of UTF-16. The use of UTF-32 under quoted-printable is highly impratical, but if implemented, will result in 8–12 bytes per code point (about 10 bytes in average), namely for BMP, each code point will occupy exactly 6 bytes more than the same code in quoted-printable/UTF-16. Base64/UTF-32 gets 5⅓ bytes for any code point. Endianness also does not affect sizes for UTF-32.

An ASCII control character under quoted-printable or UTF-7 may be represented either directly or encoded (escaped). The need to escape a given control character depends on many circumstances, but newlines in text data are usually coded directly.

Compression schemes

BOCU-1 and SCSU are two ways to compress Unicode data. Their encoding relies on how frequently the text is used. Most runs of text use the same script; for example, Latin, Cyrillic, Greek and so on. This normal use allows many runs of text to compress down to about 1 byte per code point. These stateful encodings make it more difficult to randomly access text at any position of a string.

These two compression schemes are not as efficient as other compression schemes, like zip or bzip2. Those general-purpose compression schemes can compress longer runs of bytes to just a few bytes. The SCSU and BOCU-1 compression schemes will not compress more than the theoretical 25% of text encoded as UTF-8, UTF-16 or UTF-32. Other general-purpose compression schemes can easily compress to 10% of original text size. The general purpose schemes require more complicated algorithms and longer chunks of text for a good compression ratio.

Unicode Technical Note #14 contains a more detailed comparison of compression schemes.

Historical: UTF-5 and UTF-6

Proposals have been made for a UTF-5 and UTF-6 for the internationalization of domain names (IDN). The UTF-5 proposal used a base 32 encoding, where Punycode is (among other things, and not exactly) a base 36 encoding. 25 = 32 explains the name UTF-5 for a code unit of 5 bits.[4] The UTF-6 proposal added a running length encoding to UTF-5, here 6 simply stands for UTF-5 plus 1.[5] The IETF IDN WG later adopted the more efficient Punycode for this purpose.[6]

Not being seriously pursued

UTF-1 never gained serious acceptance. UTF-8 is much more frequently used.

UTF-9 and UTF-18, despite being theoretically functional encodings, were not intended for practical use, mostly because systems using 9-bit bytes were largely extinct by the time they were designed.

References

  1. ^ Apple Developer Connection: Internationalization Programming Topics: Strings Files
  2. ^ "Strings Programming Guide". MAC OS X Developer Guide. Apple. 2009. http://developer.apple.com/mac/library/DOCUMENTATION/Cocoa/Conceptual/Strings/Articles/Strings.html#//apple_ref/doc/uid/20000145-BBCCGGCC. 
  3. ^ "Character Encoding in Entities". Extensible Markup Language (XML) 1.0 (Fifth Edition). W3C. 2008. http://www.w3.org/TR/xml/#charencoding. 
  4. ^ Seng, James, UTF-5, a transformation format of Unicode and ISO 10646, 28 Jan 2000
  5. ^ Historical IETF IDN UTF-6 draft
  6. ^ Historical IETF IDN WG page

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Unicode typefaces — (also known as UCS fonts and Unicode fonts) are typefaces containing a wide range of characters, letters, digits, glyphs, symbols, ideograms, logograms, etc., which are collectively mapped into the standard Universal Character Set, derived from… …   Wikipedia

  • Unicode Transformation Format — may refer to one of several forms:* UTF 1 * UTF 7 * UTF 8 * UTF 16 * UTF 32 See also * Comparison of Unicode encodings …   Wikipedia

  • Unicode — For the 1889 Universal Telegraphic Phrase book, see Commercial code (communications). The Unicode official logo since October 2009 …   Wikipedia

  • Unicode font — A Unicode font (also known as UCS font and Unicode typeface) is a computer font that contains a wide range of characters, letters, digits, glyphs, symbols, ideograms, logograms, etc., which are collectively mapped into the standard Universal… …   Wikipedia

  • Unicode Consortium — The Unicode® Consortium (Unicode Inc.), the non profit organization that coordinates the development of the Unicode™ Standard, has the ambitious goal of eventually replacing existing character encoding schemes with Unicode and its standard… …   Wikipedia

  • Unicode and e-mail — Many E mail clients now offer some support for Unicode in E mail bodies. Most do not send in Unicode by default, but as time passes, more and more systems are likely to be set up with fonts capable of displaying the full range of Unicode… …   Wikipedia

  • Unicode equivalence — is the specification by the Unicode character encoding standard that some sequences of code points represent essentially the same character. This feature was introduced in the standard to allow compatibility with preexisting standard character… …   Wikipedia

  • Unicode character property — Unicode assigns character properties to each code point.[1] These properties can be used to handle characters (code points) in processes, like in line breaking, script direction right to left or applying controls. Slightly inconsequently, some… …   Wikipedia

  • Comparison of hex editors — Contents 1 General 2 Features 3 Notes and references 3.1 Notes 3.2 References …   Wikipedia

  • Comparison of text editors — This article provides basic comparisons for common text editors. More feature details for text editors are available from the Category of text editor features and from the individual products articles. This article may not be up to date or… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.