Countercurrent exchange is a mechanism occurring in nature and mimicked in industry and engineering, in which there is a crossover of some property, usually heat or some component, between two flowing bodies flowing in opposite directions to each other. The flowing bodies can be liquids, gases, or even solid powders, or any combination of those. For example, in a distillation column, the vapors bubble up through the downward flowing liquid while exchanging both heat and mass.
The maximum amount of heat or mass transfer that can be obtained is higher with countercurrent than cocurrent (parallel) exchange because countercurrent maintains a slowly declining difference or gradient (usually temperature or concentration difference). In cocurrent exchange the initial gradient is higher but falls off quickly, leading to wasted potential. For example, in the diagram at the right, the fluid being heated (exiting top) has a higher exiting temperature than the cooled fluid (exiting bottom) that was used for heating. With cocurrent or parallel exchange the heated and cooled fluids can only approach one another. The result is that countercurrent exchange can achieve a greater amount of heat or mass transfer than parallel under otherwise similar conditions. See: Heat exchanger#Flow arrangement
Countercurrent exchange when set up in a circuit or loop can be used for building up concentrations, heat, or other properties of flowing liquids. Specifically when set up in a loop with a buffering liquid between the incoming and outgoing fluid running in a circuit, and with active transport pumps on the outgoing fluid's tubes, the system is called a Countercurrent multiplier, enabling a multiplied effect of many small pumps to gradually build up a large concentration in the buffer liquid.
Other countercurrent exchange circuits where the incoming and outgoing fluids touch each other are used for retaining a high concentration of a dissolved substance or for retaining heat, or for allowing the external buildup of the heat or concentration at one point in the system.
Countercurrent exchange circuits or loops are found extensively in nature, specifically in biologic systems. In vertebrates, they are called a Rete mirabile, originally the name of an organ in fish Gills for absorbing oxygen from the water. It is mimicked in industrial systems. Countercurrent exchange is a key concept in chemical engineering thermodynamics and manufacturing processes, for example in extracting sucrose from sugar beet roots.
edit] The three current exchange systems
Countercurrent exchange along with concurrent exchange and contra-current exchange comprise the mechanisms used to transfer some property of a fluid from one flowing current of fluid to another across a barrier allowing one way flow of the property between them. The property transferred could be heat, concentration of a chemical substance, or other properties of the flow.
When heat is transferred, a thermally-conductive membrane is used between the two tubes, and when the concentration of a chemical substance is transferred a semipermeable membrane is used.
Concurrent flow - half transfer
In the concurrent flow exchange mechanism, the two fluids flow in the same direction.
As the Concurrent and countercurrent exchange mechanisms diagram shows, a concurrent exchange system has a variable gradient over the length of the exchanger. With equal flows in the two tubes, this method of exchange is only capable of moving half of the property from one flow to the other, no matter how long the exchanger is.
If each stream changes its property to be 50% closer to that of the opposite stream's inlet condition, exchange will stop when the point of equilibrium is reached, and the gradient has declined to zero. In the case of unequal flows, the equilibrium condition will occur somewhat closer to the conditions of the stream with the higher flow.
Concurrent flow examples
A concurrent heat exchanger is an example of a concurrent flow exchange mechanism.
Two tubes have a liquid flowing in the same direction. One starts off hot at 60oC, the second cold at 20oC. A thermoconductive membrane or an open section allows heat transfer between the two flows.
The hot fluid heats the cold one, and the cold fluid cools down the warm one. The result is thermal equilibrium: Both fluids end up at around the same temperature: 40oC, almost exactly between the two original temperatures (20oC and 60oC). At the input end, there is a large temperature difference of 40oC and much heat transfer; at the output end, there is a very small temperature difference (both are at the same temperature of 40oC or close to it), and very little heat transfer if any at all. If the equilibrium - where both tubes are at the same temperature - is reached before the exit of the liquid from the tubes, no further heat transfer will be achieved along the remaining length of the tubes.
A similar example is the concurrent concentration exchange. The system consists of two tubes, one with brine (concentrated saltwater), the other with freshwater (which has a low concentration of salt in it), and a semi permeable membrane which allows only water to pass between the two, in an osmotic process. Many of the water molecules pass from the freshwater flow in order to dilute the brine, while the concentration of salt in the freshwater constantly grows (since the salt is not leaving this flow, while water is). This will continue, until both flows reach a similar dilution, with a concentration somewhere close to midway between the two original dilutions. Once that happens, there will be no more flow between the two tubes, since both are at a similar dilution and there is no more osmotic pressure.
Countercurrent flow - almost full transfer
In the Countercurrent flow - the two flows move in opposite directions.
Two tubes have a liquid flowing in the opposite directions. The top tube starts off hot, the bottom cold. The system can maintain a nearly constant gradient between the two flows over their entire length. With a sufficiently long length and a sufficiently low flow rate this can result in almost all of the property heat transferred.
Countercurrent flow examples:
In a countercurrent heat exchanger, the hot fluid becomes cold, and the cold fluid becomes hot.
In this example, hot water at 60oC enters the top pipe. It warms water in the bottom pipe which has been warmed up along the way, to almost 60oC. A minute but existing heat difference still exists, and a small amount of heat is transferred, so that the water leaving the bottom pipe is at close to 60oC. Because the hot input is at its maximum temperature of 60oC, and the exiting water at the bottom pipe is nearly at that temperature but not quite, the water in the top pipe can warm the one in the bottom pipe to nearly its own temperature. At the cold end - the water exit from the top pipe, because the cold water entering the bottom pipe is still cold at 20oC, it can extract the last of the heat from the now-cooled hot water in the top pipe, bringing its temperature down nearly to the level of the cold input fluid (21oC).
The result is that the top pipe which received hot water, now has cold water leaving it at 20oC, while the bottom pipe which received cold water, is now emitting hot water at close to 60oC. In effect, most of the heat was transferred.
Conditions for higher transfer results
It should be noted that nearly complete transfer in systems implementing countercurrent exchange, is only possible if the two flows are, in some sense, "equal".
For a maximum transfer of substance concentration, an equal flowrate of solvents and solutions is required. For maximum heat transfer, the average specific heat capacity and the mass flow rate must be the same for each stream. If the two flows are not equal, for example if heat is being transferred from water to air or vice-versa, then, similar to concurrent exchange systems, a variation in the gradient is expected because of a buildup of the property not being transferred properly.
Countercurrent exchange in biological systems
Countercurrent exchange is used extensively in biological systems for a wide variety of purposes. For example, fish use it in their gills to transfer oxygen from the surrounding water into their blood, and birds use a countercurrent heat exchanger between blood vessels in their legs to keep heat concentrated within their bodies. In vertebrates this type of organ is referred to as a Rete mirabile (originally the name of the organ in the fish gills). Mammalian kidneys use countercurrent exchange to remove water from urine so the body can retain water used to move the nitrogenous waste products (see Countercurrent multiplier).
A countercurrent multiplier is a system where fluid flows in a loop so that the entrance and exit are at similar low concentration of a dissolved substance but at the tip of the loop there is a very high concentration of that substance. A buffer liquid between the incoming and outgoing tubes receives the concentrated substance. The incoming and outgoing tubes do not touch each other.
The system allows the buildup of a high concentration gradually, with the use of many active transport pumps each pumping only against a very small gradient.
Theoretically a similar system could exist or be constructed for heat exchange.
The incoming flow starting at a low concentration has a semipermeable membrane with water passing to the buffer liquid via osmosis at a small gradient. There is a gradual buildup of concentration inside the loop until the loop tip where it reaches its maximum.
In the example image water enters at 299 mg/L (NaCL / H2O). Water passes because of a small osmotic pressure to the buffer liquid in this example at 300 mg/L (NaCL / H2O). Further up the loop there is a continued flow of water out of the tube and into the buffer, gradually raising the concentration of NaCL in the tube until it reaches 1199 mg/L at the tip. The buffer liquid between the two tubes is at a gradually rising concentration, always a bit over the incoming fluid, in our example reaching 1200 mg/L. This is regulated by the pumping action on the returning tube as explained immediately.
The tip of the loop has the highest concentration of salt (NaCL) in the incoming tube - in the example 1199 mg/L, and in the buffer 1200 mg/L. The returning tube has active transport pumps, pumping salt out to the buffer liquid at a low difference of concentrations of up to 200 mg/L more than in the tube. Thus when opposite the 1000 mg/L in the buffer liquid, the concentration in the tube is 800 and only 200 mg/L are needed to be pumped out. But the same is true anywhere along the line, so that at exit of the loop also only 200 mg/L need to be pumped.
In effect, this can be seen as a gradually multiplying effect - hence the name of the phenomena: a 'countercurrent multiplier' or the mechanism: Countercurrent multiplication.
In the kidney
A circuit of fluid in the Loop of Henle - an important part of the kidneys allows for gradual buildup of the concentration of urine in the kidneys, by using active transport on the exiting 'nephrons' (tubules carrying liquid in the process of gradually concentrating the urea). The active transport pumps need only to overcome a constant and low gradient of concentration, because of the countercurrent multiplier mechanism
Various substances are passed from the liquid entering the Nephrons until exiting the loop (See the Nephron flow diagram). The sequence of flow is as follows:
- Proximal convoluted tubule: It then may reabsorb urea in the thick descending limb. Water is removed from the nephrons by osmosis (and Glucose and other ions are pumped out with active transport), gradually raising the concentration in the nephrons.
- Loop of Henle Descending: The liquid passes from the thick descending limb to the thin one. Water is constantly released via osmosis. Gradually there is a buildup of osmotic concentration, until 1200 mOsm is reached at the loop tip, but the difference across the membrane is kept small and constant.
- For example, the liquid at one section inside the thin descending limb is at 401 mOsm while outside its 400. Further down the descending limb, the inside concentration is 501 while outside it is 500, so a constant difference of 1 mOsm is kept all across the membrane, although the concentration inside and outside are gradually increasing.
- Loop of Henle Ascending: after the tip (or 'bend') of the loop, the liquid flows in the thin ascending limb. Salt - Sodium Na+ and Chlorine Cl- ions are pumped out of the liquid gradually lowering the concentration in the exiting liquid, but, using the countercurrent multiplier mechanism, always pumping against a constant and small osmotic difference.
- For example, the pumps at a section close to the bend, pump out from 1000 mOsm inside the ascending limb to 1200 mOsm outside it, with a 200 mOsm across. Pumps further up the thin ascending limb, pump out from 400 mOsm into liquid at 600 mOsm, so again the difference is retained at 200 mOsm from the inside to the outside, while the concentration both inside and outside are gradually decreasing as the liquid flow advances.
- The liquid finally reaches a low concentration of 100 mOsm when leaving the thin ascending limb and passing through the thick one
- Distal convoluted tubule: Once leaving the loop of Henle the thick ascending limb can optionally reabsorb and re increase the concentration in the nephrons.
- Collecting duct: The collecting duct receives liquid between 100 mOsm if no re-absorption is done, to 300 or above if re-absorption was used. The collecting duct may continue raising the concentration if required, by gradually pumping out the same ions as the Distal convoluted tubule, using the same gradient as the ascending limbs in the loop of Henly, and reaching the same concentration.
- Ureter: The liquid urine leaves to the Ureter.
Initially the countercurrent exchange mechanism and its properties were proposed in 1951 by professor Werner Kuhn and two of his former students who called the mechanism found in the Loop of Henle in mammalian kidneys a Countercurrent multiplier and confirmed by laboratory findings in 1958 by Professor Carl W. Gottschalk. The theory was acknowledged a year later after a meticulous study showed that there is almost no osmotic difference between liquids on both sides of nephrons. Ever since, many similar mechanisms have been found in biologic systems, the most notable of these: the Rete mirable in fish.
Countercurrent exchange of heat in organisms
Countercurrent heat exchange (CCHE) is a highly efficient means of minimizing heat loss through the skin's surface because heat is recycled instead of being dissipated. This way, the heart does not have to pump blood as rapidly in order to maintain a constant body core temperature and thus, metabolic rate.
CCHE is used in animals living in extreme conditions of cold or hot weather have a mechanism for retaining the heat in (or out of) the body. These are countercurrent exchange systems with the same fluid, usually blood, in a circuit, used for both directions of flow.
When animals like the leatherback turtle and dolphins are in colder water to which they are not acclimatized, they use this CCHE mechanism. Such CCHE systems are made up of a complex network of peri-arterial venous plexuses that run from the heart and through the blubber to peripheral sites (i.e. the tail flukes, dorsal fin and pectoral fins).
Each plexus consists of a singular artery containing warm blood from the heart surrounded by a bundle of veins containing cool blood from the body surface. As these fluids flow past each other, they create a heat gradient in which heat is transferred and retained inside the body. The warm arterial blood transfers most of its heat to the cool venous blood now coming in from the outside. This conserves heat by recirculating it back to the body core. Since the arteries give up a good deal of their heat in this exchange, there is less heat lost through convection at the periphery surface.
Another example is found in the legs of an arctic fox treading on snow. The paws are necessarily cold, but blood can circulate to bring nutrients to the paws without losing much heat from the body. Proximity of arteries and veins in the leg results in heat exchange, so that as the blood flows down it becomes cooler, and doesn't lose much heat to the snow. As the (cold) blood flows back up from the paws through the veins, it picks up heat from the blood flowing in the opposite direction, so that it returns to the torso in a warm state, allowing the fox to maintain a comfortable temperature, without losing it to the snow.
Countercurrent exchange in sea and desert birds to distill seawater
Sea and desert birds have been found to have a salt gland near the nostrils which concentrates brine, later to be "sneezed" out to the sea, in effect allowing these birds to drink seawater without the need to find freshwater resources. It also enables the seabirds to remove the excess salt entering the body when eating, swimming or diving in the sea for food. The kidney cannot remove these quantities and concentrations of salt.
The salt secreting gland has been found in seabirds like pelicans, petrels, albatrosses, gulls, terns and possess. It has also been found in Namibian ostriches and other desert birds, where a buildup of salt concentration is due to dehydration and scarcity of drink water.
In seabirds the salt gland with its countercurrent exchange mechanism work as follows:
- a. Salt enters the blood plasma from the intestines, so it is initially at a high concentration (but less than the concentration in the sea water)
- b. Osmosis causes the extra-cellular fluid volume (ECFV) to rise, with large amounts of water exit the cells, while lowering the salt concentration of the extra-cellular fluid.
- c. A section of the salt gland further raises concentration of salt in the blood plasma. This is accomplished in a small area of the salt gland, by Active transport (moving the salt against its concentration gradient, using energy from ATP breakdown).
- d. In order to preserve the extremely high concentration of salt in the gland, blood plasma entering the gland and exiting it is passed through a counter current-exchange circuit, so that the high concentration of salt in plasma leaving the gland is returned to it in the incoming plasma. This system preserves the high concentration in the gland, without losing it to the body's blood system, allowing the gland to build up the salt concentration to ever higher concentrations, by pumping salt molecules in with active transport.
The anatomy of the countercurrent exchange mechanism in the salt gland is as follows: The gland has an area where salt is pumped into its tubules using active transport reaching extremely high concentrations. at the end of the gland there is an area with tubules with low salt concentration. The fluid moves in a counter-current exchange circuit so that although high concentrations leave the gland, they are constantly returned to it. Tiny arteries carrying salty blood enter the gland and are very closely juxtaposed to the tubules with low concentration, slightly adding to its concentration in the exiting tubules. This extra concentration is retrieved to the returning tubules, so that there is a continued buildup of concentration at the gland 'top', but a constant low concentration at the gland 'end', where the arteries are passing their salt to the gland. 'Veinules' (small veins) leave the gland with a continued decreasing concentration of salt in the blood.
The salty liquid thus collected into the glands is periodically sneezed out from the nostrils.
Countercurrent exchange in industrial and scientific systems
Countercurrent Chromatography is a method of separation, that is based on the differential partitioning of analytes between two immiscible liquids using countercurrent or cocurrent flow. Evolving from Craig's Countercurrent Distribution (CCC), the most widely used term and abbreviation are CounterCurrent Chromatography or CCC, in particular when using hydrodynamic CCC instruments. The term partition chromatography is largely a synonymous and predominantly used for hydrostatic CCC instruments.
- Distillation of chemicals such as in petroleum refining is done towers or columns with perforated trays. Vapor from the low boiling fractions bubbles upward through the holes in the trays in contact with the down flowing high boiling fractions. The concentration of low boiling fraction increases in each tray up the tower as it is "stripped". The low boiling fraction is drawn off the top of the tower and the high boiling fraction drawn from the bottom. The process in the trays is a combination of heat transfer and mass transfer. Heat is supplied at the bottom, known as a "reboiler" and cooling is done at the with a condenser at the top.
- Liquid-liquid extraction (also called 'solvent extraction' or 'partitioning' is a common method for extracting a substance from one liquid into another liquid at a different 'phase' (such as "slurry"). This method, which implements a countercurrent mechanism, is used in nuclear reprocessing, ore processing, the production of fine organic compounds, the processing of perfumes, the production of vegetable oils and biodiesel, and other industries.
- Gold can be separated from a cyanide solution with the Merrill-Crowe process using Counter Current Decantation (CCD). In some mines, Nickel and Cobalt are treated with CCD, after the original ore was treated with concentrated Sulfuric acid and steam in Titanium covered autoclaves, producing nickel cobalt slurry. The nickel and cobalt in the slurry are removed from it almost completely using a CCD system exchanging the cobalt and nickel with flash steam heated water.
- Lime can be manufactured in countercurrent furnaces allowing the heat to reach high temperatures using low cost, low temperature burning fuel. Historically this was developed by the Japanese in certain types of the Anagama kiln. The kiln is built in stages, where fresh air coming to the fuel is passed downwards while the smoke and heat is pushed up and out. The heat does not leave the kiln, but is transferred back to the incoming air, and thus slowly builds up to 3000oC and more.
- Cement may be created using a countercurrent kiln where the heat is passed in the cement and the exhaust combined, while the incoming air draft is passed along the two, absorbing the heat and retaining it inside the furnace, finally reaching high temperatures.
- Gasification - the process of creating methane and carbon monoxide from organic or fossil matter, can be done using a Counter-current fixed bed ("up draft") gasifier which is built in a similar way to the Anagama kiln, and must therefore withstand more harsh conditions, but reaches better efficiency.
- In nuclear power plants, water leaving the plant must not contain even trace particles of Uranium. Counter Current Decantation CCD is used in some facilities to extract water, totally clear of Uranium.
- Some Centrifugal extractors use counter current exchange mechanisms for extracting high rates of the desired material.
- Some protein skimmers - a device to clean saltwater pools and fish ponds of organic mater - use counter current technologies.
- Countercurrent multiplier animation from Colorado University.
- Research about elephant seals using countercurrent heat exchange to keep heat from leaving their body while breathing out, during hibernation.
- Patent for a snow mask with a removable countercurrent exchange module which keeps the warmth from leaving the mask when breathing out.
- An industrial system for aerating waste water and sewage which works on the countercurrent exchange principle, without pipes. Air bubbles floating upwards meet water in a down current, causing more of the air to dissolve.
- ^ Both countercurrent exchange and countercurrent multiplication systems have been found in the kidneys. The latter in the loop of Henle, the first in the vasa recta
- ^ The specific heat capacity should be calculated on a mass basis, averaged over the temperature range involved. This is in keeping with the second law of thermodynamics
- ^ See the countercurrent multiplier animation at the Colorado University website.
- ^ Beginning with the Afferent arteriole, a blood vessel leading to the Glomerulus, filtered blood is passed to the nephrons in the Bowman's capsule which surrounds the Glomerulus. (The blood leaves the Glomerulus in the Efferent arteriole).
- ^ The liquid from the Bowman's capsule reaches the thick descending limb. Urea may be reabsorbed into the low (300 mOsm) osmotic concentration in the limb nephrons. The urea absorption in the thick descending limb is inhibited by Sartans and catalyzed by lactates and Ketones.
- ^ Glucose, Amino acids, various ions and organic material leave the limb, gradually raising the concentration in the nephrons. Dopamin inhibits the secretion from the thick descending limb, and Angiotensin II catalyzes it
- ^ The semipermeable membrane of the thin descending limb does not permit passage of ions or large dissolved molecules
- ^ The thin ascending limb's membrane does not permit free passage of any substance including water.
- ^ Furosemide inhibits salt secretion from the thin ascending limb, while Aldosterone catalyzes the secretion.
- ^ Water or liquid with very low osmotic concentration leaving the nephrons is reabsorbed in the Peritubular capillaries and returned to the blood.
- ^ Reabsorbing and increasing the concentration is done by optionally absorbing Potassium (K+) and Hydrogen (H+) anions, while releasing water and the continued pumping out of Calcium (Ca+) and salt (Na+ and Chlorine Cl- ions). The repeated concentration by secretion of Calcium and salt ions is inhibited by Thiazides and catalyzed by Anti diuretic hormone and Aldosterone
- ^ Atial natiuretic peptide and Urodiatin inhibit water salt and calcium secretion from the collecting duct, while Antiduretic hormone and Aldosterone catalyze it.
- ^ The original lecture was published in 1951 in German. According to a book on Jewish scientists under the Reich Kuhn theorized and studied this mechanism already in the early 1940's. This was confirmed in 2001 in the translation to the original lecture published with remarks by Professor Bart Hargitay, then one of the two former student aids. Harbitay says: Before settling in Basel, Kuhn did some very fundamental work in Kiel, separating isotopes in a centrifuge. This caused him to be fascinated with the effect of countercurrents in multiplying a very small single effect to significant separations. (Journal of the American Society of Nephrology website)
- ^ Gottschalk, C. W.; Mylle, M. (1958), "Evidence that the mammalian nephron functions as a countercurrent multiplier system", Science 128 (3324): 594, doi:10.1126/science.128.3324.594, PMID 13580223 .
- ^ Gottschalk, C. W.; Mylle, M. (1959), "Micropuncture study of the mammalian urinary concentrating mechanism: evidence for the countercurrent hypothesis", American Journal of Physiology 196 (4): 927–936, PMID 13637248, http://ajplegacy.physiology.org/cgi/content/abstract/196/4/927 . See also History of the urinary concentrating mechanism an article in 'Kidney' - the Journal of International Society of Nephrology, where Prof. Gottschalk points to the heated debate prior to the acceptance of the theory of the countercurrent multiplier action of the kidney
- ^ Animal physiology at Davidson
- ^ Proctor, Noble S.; Lynch, Patrick J. (1993). Manual of Ornithology. Yale University Press.
- ^ Ritchison, Gary. "Avian osmoregulation". http://people.eku.edu/ritchisong/bird_excretion.htm. Retrieved 16 April 2011.
- ^ "TheLiquidPhase". http://www.theliquidphase.org/. Retrieved 16 April 2011.
- ^ "Countercurrent Chromatography". University of Illinois at Chicago. http://tigger.uic.edu/~gfp/countercurrent/index2.htm. Retrieved 16 April 2011.
- ^ According to the company, almost half of the electricity in the US is used to aerate sewage and wastewater. The countercurrent exchange method saves up to 50% of the electricity
Wikimedia Foundation. 2010.
Look at other dictionaries:
Countercurrent — may refer to: Countercurrent pool Countercurrent exchange Countercurrent chromatography Equatorial Counter Current two politcal party factions in Italy: Countercurrent, a faction of the Communist Refoundation Party Countercurrent, a faction of… … Wikipedia
Countercurrent multiplication — A countercurrent multiplier system is a mechanism that expends energy to create a concentration gradient. It is found widely in nature and especially in mamalian organs. For example, it can refer to the process underlying the process of urine… … Wikipedia
Multicolumn countercurrent solvent gradient purification — (MCSGP) is a form of chromatography that is used to separate or purify biomolecules from complex mixtures. It was developed at the Swiss Federal Institute of Technology Zürich by Aumann and Morbidelli. The process consists of three to six… … Wikipedia
Heat exchanger — An interchangeable plate heat exchanger Tubular heat exchan … Wikipedia
Nephron — For the drug with trade name Nephron, see Epinephrine. Nephron Nephron of the kidney without juxtaglomerular apparatus Latin nephroneum Gray s … Wikipedia
Glossary of fuel cell terms — The Glossary of fuel cell terms lists the definitions of many terms used within the fuel cell industry. The terms in this glossary may be used by fuel cell industry associations, in education material and fuel cell codes and standards to name but … Wikipedia
Regenerative heat exchanger — A regenerative heat exchanger, or more commonly a regenerator, is a type of heat exchanger where the flow through the heat exchanger is cyclical and periodically changes direction. It is similar to a countercurrent heat exchanger. However, a… … Wikipedia
Acrocyanosis (benign) — DiseaseDisorder infobox Name = Acrocyanosis ICD10 = ICD10|I|73.8| |i|00 ICD9 = ICD9|443.89 Caption = DiseasesDB = 29444 ICDO = OMIM = MedlinePlus = eMedicineSubj = eMedicineTopic = eMedicine mult = MeshName = MeshNumber = Acrocyanosis refers to a … Wikipedia
renal system — ▪ anatomy Introduction in humans (human body), organ system that includes the kidneys, where urine is produced, and the ureters, bladder, and urethra for the passage, storage, and voiding of urine. In many respects the human excretory, or… … Universalium
Sugar beet — Taxobox name = Sugar beet image width = 270px image caption = Two sugar beets the one on the left has been selectively bred to be smoother than the traditional beet, so that it traps less soil. regnum = Plantae divisio = Magnoliophyta classis =… … Wikipedia