A recumbent bicycle is a
bicyclewhich places the rider in a supine or semi-supine position (rarely, in a prone position). Recumbents hold the world speed record for a bicycle and were banned from international racing in 1934 cite web
url = http://www.helsinki.fi/~tlinden/winforb.html
title = The History of the Recumbent Bicycle: Winning Forbidden
accessdate = 2008-08-28] .
The back of the rider is supported, and the rider's legs extend forward to pedals that are at about the same height as the seat. Steering is either above- or over-seat steering (ASS or OSS) using a
handlebarin front of the rider, or under-seat steering (USS) using a handlebar under the seat that extends to the sides. The wheels are often smaller and/or farther apart than on an upright bicycle. Another style, Pivoting-boom FWD (PBFWD), has the crankset connected to and moving with the front fork.cite web
url = http://web.archive.org/web/20061022094132/http://traylorfwd.home.mindspring.com/fwd.html
title = Front Wheel Drive - Is it practical?
accessdate = 2006-10-22] .
Records of recumbent designs go back to the early days of cycling, but recumbent use was not widespread until the late 20th century. Recumbent riders hold world speed records for unpaced, human-powered vehicles.
Tricyclesform a substantial part of the recumbent market (far more so than they do for uprights); the generic term "trike" tends to be applied to these as well.
Recumbents can be categorized by their wheelbase, wheel sizes, steering system, faired or unfaired, and front-wheel or rear-wheel drive.
Recumbent bicycles may be classified according to their wheelbase: long wheelbase (LWB) models have the pedals located between the front and rear wheels; short wheelbase (SWB) models have the pedals in front of the front wheel; compact long wheelbase (CLWB) models have the pedals either very close to the front wheel or above it. Within these categories are variations, intermediate types, and even convertible designs (LWB to CLWB) - there is no "standard" recumbent.
The rear wheel of a recumbent is usually behind the rider and may be any size, from around 16 inches to the 700c of an upright racing cycle. The front wheel is commonly smaller than the rear, although a number of recumbents feature dual 26-inch (ISO 559), ISO 571 (650c), or ISO 622 (700c) wheels. Notable among these are "highracers", such as the Bacchetta Corsa and Strada or Volae Team, or the "LWB-style" RANS Stratus XP. Larger wheels generally have lower rolling resistance but a higher profile leading to higher air resistance. Highracer aficionados also claim that they are more stable, and although bicycle stability increases with the height of the centre of gravity above the ground, the wide variety of recumbent designs makes such generalizations unreliable. Another advantage of both wheels being the same size is that the bike requires only one size of inner tube.
The most common arrangement is probably an ISO 559 rear wheel and an ISO 406 (20-
inch) front wheel. The small front wheel and large rear wheel combination is used to keep the pedals and front wheel clear of each other, avoiding the problem called "heel strike" (where the rider's heels catch the wheel in tight turns). A pivoting-boom front-wheel drive (PBFWD) configuration also overcomes heel strike since the pedals and front wheel turn together. PBFWD bikes may have dual 26-inch wheels or larger.
Steering for bikes can be generally categorized as over-seat (OSS) or above seat steering (ASS) and under-seat (USS). Most tadpole trikes are USS. USS is usually indirect -- the bars link to the headset through a system of rods and
bell cranks. OSS/ASS is generally direct -- the steerer acts on the front fork like a standard bicycle handlebar -- but the bars themselves may extend well behind the wheel (more like a tiller); alternatively the bars might have long rearward extensions (sometimes known as Superman or Kingcycle bars). Chopper-style bars are sometimes seen on LWB bikes.
As with upright bicycles, most recumbents are rear wheel drive. However, due to the proximity of the crank to the front wheel, front wheel drive (FWD) can be an option, and it allows for a much shorter chain. One style requires the chain to twist slightly to allow for steering.cite web
url = http://www.kinetics.org.uk/html/toxy_zr.shtml
title = Toxy ZR Race Recumbent
accessdate = 2007-02-03] Another style, Pivoting-boom FWD (PBFWD), has the crankset connected to and moving with the front fork.cite web
url = http://web.archive.org/web/20061022094132/http://traylorfwd.home.mindspring.com/fwd.html
title = Front Wheel Drive - Is it practical?
accessdate = 2006-10-22] In addition to the much shorter chain, the advantages to PBFWD are use of a larger front wheel for lower rolling resistance without heel strike (you can pedal while turning) and use of the upper body when sprinting or climbing. The main disadvantage to all FWD designs is "wheelspin" when climbing steep hills covered with loose gravel, wet grass, etc. This mainly affects off-road riders, and can be ameliorated by shifting the weight forward, applying steady pressure to the pedals, and using tires with more aggressive tread. Another disadvantage of PBFWD for some riders is a slightly longer "learning curve" due to adaptation to the pedal-steer effect (forces applied to the pedal can actually steer the bike). Beginner riders tend to swerve along a serpentine path until they adapt a balanced pedal motion. After adaptation, a PBFWD recumbent can be ridden in as straight a line as any other bike, and can even be steered accurately with the feet only.
Fully suspended bikes
Modern recumbent bikes are increasingly being fitted with front and rear suspension systems for increased comfort and traction on rough surfaces. Coil, elastomer, and air-sprung suspension systems have all been utilized on recumbent bikes, using oil or air-damping in forks and rear shock absorbers. The maturation of fully-suspended conventional mountain bikes has aided the development of these designs, which often utilize many of the same parts, suitably modified for recumbent use.
Some riders fit their bikes with
aerodynamicdevices called fairings. These have two main benefits: they reduce wind-drag (typically increasing average speeds by around 2mph), and they keep the rider warmer and drier in cold and wet weather. Fairings are also available for upright bikes, but are much less common.
The seats themselves are either of mesh stretched tightly over a frame (as in the Gold Rush pictured) or foam cushions over hard shells like the Stinger pictured, which might be moulded (as here) or assembled from sheet materials. Hard-shell seats predominate in Europe, mesh seats in the USA.
Mountain bike recumbents
With the right equipment and design, recumbent bikes can be used for riding unpaved roads and offroad, just as with conventional mountain bikes. Because of their longer wheelbase and the manner in which the rider is confined to the seat, recumbents are not as easy to use on tight, curving unpaved singletrack. Large-diameter wheels, mountain gearing and off-road specific design have been used since 1999 on the Lightfoot Ranger. Crank-forward designs that facilitate climbing out of the saddle, such as the RANS Dynamik, also can be used off-road. [ [http://www.bikeroute.com/Recumbents/News/Archives/2007_11.html Recumbent News: November 2007 Archives ] ]
Lowracers are a type of recumbent more common in Europe among racing enthusiasts. These typically have two 20" wheels or a 26" wheel at the rear and 20" wheel at the front. The seat is positioned between the wheels rather than above them. The extreme reclined position, and the fact that the rider is sitting in line with the wheels rather than atop them, makes this the fastest type of bicycle that can be used on roads.
Highracers have higher seats and cranks than lowracers, and typically have full-size mountain bike or road bike wheels on the front and back. These are highly maneuverable and are slower than lowracers but they are almost as fast as diamond frame bicycles. Heel strike only occurs at low speeds and in tight turns and many riders have fallen over and broken their hips when stopping, since the cranks are further above the front wheel than on a lowracer (citation?).
Just as with upright
bicycles, recumbents are built and marketed with more than one seat, thus combining the advantages of recumbents with those of tandem bicycles. In order to keep the wheelbase from being any longer than absolutely necessary, tandem recumbents often place the stoker's cranksetunder the captain's seat.
tricycles (trikes) are closely related to recumbent bicycles, but have three wheels instead of two. Trikes come in two varieties, the "delta", with two rear wheels, and the "tadpole", with two front wheels.
Three remarkable characteristics of recumbent trikes include: (1) the rider does not need to disengage from the pedals when stopped; (2) the trike can be geared very low to enable mountain climbing while heavily loaded and at a slow speed, without losing stability; and (3) trikes are capable of turning sharply without leaning, producing lateral "g forces" similar to sports
cars. Recumbent trikes may also be more suitable for people with balance or limb disabilities.
Windcheetah, designed by Mike Burrowsand one of the first commercial tadpole designs, is often credited with kicking off the recumbent tadpole tricycle boom.
At present, the tadpole trike market is represented by companies such as Inspired Cycle Engineering (ICE), Greenspeed and HP Velotechnik, with touring being a strong market but sporting use also being common. ICE has produced a sub-20 lb trike - all the more remarkable for being steel framed and fitted with a hard-shell seat, full mudguards, and luggage rack. As the market expands, costs continue to drop. Stein has launched a range of budget recumbent trikes made in Eastern Europe, the
KMX Kartstunt trike, and others.
Delta trikes also offer the possibility of expanded cargo capacity; the Lightfoot Cycles line includes several delta recumbent trike models which provide cargo capacity from 6,000 cubic inches (100 L, for errands or touring) to as much as 35,000 cubic inches (575 L, for cargo delivery).
In order to accommodate
paraplegicsand other individuals with little or no use of their legs, many manufacturers have designed and released hand-powered recumbent trikes, or handcycles. Handcycles are a regular sight at HPV meetings and are beginning to be seen on the streets. They usually follow a delta design with front wheels driven by standard dérailleur gearing powered by hand cranks. Brake levers are usually mounted on the hand holds, which are usually set with no offset rather than the 180° of pedal cranks. The entire crank assembly and the front wheel turn together, allowing the rider to steer and crank simultaneously.
Although arms are less strong than legs, many hand cyclists are able to make use of the power of the whole upper body. A good hand cyclist can still achieve a respectable pace in competitions. Georgiev's "Varna" bikes have been well represented over the years (see also Records below) and in 1995 Jacob Heilveil achieved 52.47 km/h (32.60 mph) in the flying 200 m.
Handcycles have also been used for touring, though few designers incorporate mudguards or luggage racks. Also, the gear ratios of standard handcycles tend to be less useful for long steep climbs.
Hand-and-foot recumbent tricycles
Recumbent cycles offer the possibility of combined hand and foot power inputs, and thus the potential for a full-body workout, and the option for persons with a weak or missing leg(s) to power a cycle. Lightfoot Cycles offers this hand-and-foot option on many of their recumbent trike models. In one recumbent tricycle design the user makes the two front wheels change direction by shifting his center of weight, and moves forward by rotating the rear wheel. [cite web
title = SKYWHEEL
year = 2008
url = http://www.skywheel.kr
accessdate = 2008-06-12]
As with upright bikes, there is a subculture of recumbent builders who design and build home-built recumbents.Fact|date=December 2007 Often these are assembled of parts from other bikes, particularly mountain bikes. The frame designs may be as simple as a long steel tube bent into the appropriate shape to as elaborate as hand-built carbon fiber frames. For many builders, the engineering and construction of the bikes is as much of a challenge as riding them.
It is possible to add couplers either during manufacturing or as a retrofit so that the frame can be disassembled into smaller pieces to facilitate packing and travel.
Compared to uprights
The striking difference in appearance between recumbents and upright bikes begs comparison. Since recumbents vary widely, the advantages and disadvantages listed below may apply to different types to different degrees or not at all. (For example, balance is not an issue on tricycles.)
ETRTO406 wheels front and rear]
A study by Bussolari and Nadel (1989) led them to pick a recumbent riding position for the Daedalus flight even though the English Channel crossing was accomplished in the
Gossamer Albatrosswith an upright position. Drela in 1998 confirmed "that there was no significant difference in power output between recumbent and conventional bicycling."cite book
title = Bicycling Science
edition = Third edition
last = Wilson
first = David Gordon
year = 2004
publisher = Massachusetts Institute of Technology
id = ISBN 0-262-73154-1
pages = 72,86]
Recumbents have several advantages over traditional upright bicycles.
:Variety. A specific recumbent can be purchased that best meets the physical needs and aesthetic preferences of the rider. Models can range from semi-upright to a full reclined position, short wheelbase to long wheelbase, fairings for rain/wind protection, suspension, and many others.
:Safety. Particularly with the lower designs, the recumbent bicycle's low center of gravity and short distance from the ground significantly reduce the consequences of a fall for the rider. It is also possible to cycle very close to the curb without risking a pedal-curb collision. A fall from a recumbent may be less harmful than from an upright bike due to the feet-first orientation ensuring that the rider never goes over the handlebars. The low center of gravity greatly increases braking and stopping capabilities.Citation
title = Characteristics of emerging road users and their safety
publisher = US Department of Transportation
url = http://www.tfhrc.gov/safety/pubs/04103/04103.pdf
id=Publication No. FHWA-HRT-04-103
last1 = Landis |first1=Bruce
last2 = Petritsch |first2=Theodore
last3 = Huang |first3=Herman]
:Comfort. The recumbent riding position reduces strain on the body, making it particularly suitable for long rides and touring. cite web
title = Medical Benefits of Recumbent Bicycles
last = Nolan, M.D.
first = Paul
accessdate= 2008-07-05] It is very easy on the neck, wrists, hands, arms, shoulders, lower back, and ischial tuberosities ("sit bones"). Riders who suffer back pain or genito-urinary trouble often find that recumbents allow them to make significant rides without pain. Urogenital trouble is less because the pedals are not under the seat, thus the seat can be larger so weight can be distributed to a larger area and to the seat back. Shorts made for recumbent riders do not have padding or any need for it.
:View angle. The recumbent riding position enables the rider to face forward, at a comfortable angle, and view the passing scenery. A recumbent rider can even look straight upward. An upright bike, particularly a road bike, on the other hand, has a riding position in which the natural angle is to stare down at the pavement below. In order to see the scenery, the neck must be craned upward.
:Health. Many riders switch to recumbents to alleviate the chronic back or neck pain from riding upright bikes. On tricycles, the inherent stability of three wheels allows very low gearing to be used, so hills can be climbed without strain on joints. Also, on some recumbents, the rider's legs are nearly at the same height as the heart. This reduces the rider's
hydrostatic pressure, thus allowing venous bloodto more easily return to the heart. This physiological effect of improved circulation suggests an increase in rider endurance and/or increased power output on long rides. Recumbent riders are not bent over as are conventional bike riders, and this makes breathing easier. Additionally, studies indicate that upright bicycle riding may be a cause of male impotencedue to pressure placed on the perineal nerve by the seat; recumbent seats do not present the same issue.
:Speed. On declines, on the flat, or on shallow inclines, recumbent bicycles are generally faster than upright bicycles for the same level of effort because the
aerodynamicprofile of the rider reduces wind resistance. It is this feature which led to the Union Cycliste Internationale (UCI) banning them in the 1930s (see History). The world speed record for human powered vehicles was set by Sam Whittinghamon a fully-faired recumbent bicycle on September 18, 2008 with a speed of 132.5 km/h (82.33 mph). [cite web
title = World's Fastest Cyclist Hits 82.3 MPH
last = Wired.com
:Turns. Although recumbents have larger turning circles than conventional bicycles, one advantage on many designs is that the rider can continue pedaling even during tight turns without fear of the pedals striking the ground.
:Balance. Balance is easier to affect with a higher
center of gravitybecause of the "pendulum effect" (it is easier to minutely change the angle at which ordinary bicycles lean). [cite web
title = Email Questions and Answers: Robot Bicycles
last = Fajans
first = Joel
url = http://socrates.berkeley.edu/~fajans/Teaching/MoreBikeFiles/BikeQuestions.htm
accessdate = 2006-08-07] Compared with riders of conventional bikes, two-wheeled recumbent riders have less scope for shifting their weight to steer or help balance the bicycle. Of course, recumbent tricycles are a special case that are ideal for riders who cannot balance a traditional two-wheeled bike.
:Starting and stopping. Because of the supine position, most recumbents do not allow the rider to push forward with the feet on the ground. This makes for slow starts and requires excellent balance. (Some designs, such as the Cruzbike, allow the rider to momentarily sit upright, push off the ground, and then recline after the bike has started to move.) However, since starting a bicycle by pushing the feet against the ground is probably a poor way to start [cite web
title = Bicycling Technique: Starting and Stopping
last = Brown
first = Sheldon
url = http://sheldonbrown.com/starting.html] , this criticism may invalidate itself. Starting a recumbent does not require great strength; it is a matter of balance and a skill which must be learned. It is best to learn from an experienced rider, who can help with a little push at first. Several rides may suffice to become confident enough of one's starting and stopping skills before becoming ready to ride in traffic or perform uphill starts. Recumbent tricycles do not require balancing and hence do not require any special skill in this regard. With many recumbent seats quite low it is often easier to get a foot down onto the ground on stopping than is the case from a conventional bike with the saddle set high for optimum pedaling.
:Maneuverability. Most recumbents have a larger turning radius. It is also very hard to jerk the front wheel onto curbs. Since the front wheel is often small, driving up unlowered curbs is very risky even with suspension.
:Uphills. A perceived and much debated disadvantage of the recumbent position is that it is more difficult to ride up hills. This is most noticeable during the initial period of riding a recumbent when the legs are not yet trained for the different muscle requirements. On a traditional bicycle, the rider can stand on the pedals and pull against the handlebars, although on a recumbent the rider can push against the seat. On either style, higher cadence reduces leg strain and fatigue when climbing. Recumbent tricycles are a special case, as riders can climb almost any gradient of hill (subject to tyre traction) with appropriate gearing since balance (and hence speed) is not an issue.
:A few designers have attempted to build bikes which convert from recumbent to upright for climbs [Citation
inventor-last = van Pelt
inventor-first = James L
issue-date = 2002-12-24
title = Convertible bicycle
country-code = US
description = ... a bicycle that can be quickly and easily configured in an upright position, a recumbent position, and a tandem position.
patent-number = 6497426] . In practice the biggest difference is probably the additional weight of the recumbent layout combined with the difficulty of balancing a bike with a low center of gravity at speeds below about convert|5|mi/h|km/h|0|abbr=on.
:Length of the frame. Some recumbent bicycle designs use longer frames than conventional bicycles. This generally results in a weight penalty and in more flexing of the frame that causes a loss of power .Fact|date=July 2008 The chain is two to three times as long as an upright and usually requires one or more idler pulleys. There is a small amount of friction in such pulleys which also reduces power slightly. Longer frame designs are more difficult to transport if the bikes are shipped, or put on racks on automobiles. Some manufacturers offer folding or break-apart designs, but these tend to be expensive. The longer distance from the handlebars to the wheels can be problematic for speedometers and cyclocomputers, including both wireless and hard-wired models. The distance from the handlebars to the crankset is likewise longer than a conventional bike and can give problems for cadence sensors.
:Constant position. While the riding position is comfortable and removes stress from the arms, it cannot easily be varied during a ride (as upright riders might stand for a hill), and some find that bottom brackets at or near hip level produces problems with cold or numb feet. Some riders suffer "recumbent butt," a pain in the
glutealmuscles caused by their increased effort while being compressed. This can usually be addressed by adjusting the seat angle and pedal position. In a more reclined position, the weight is spread evenly between the back and buttocks. The rider of a conventional bike can stand up on the pedals to allow his legs to take up the shock of a severe bump in the road. The recumbent rider cannot (although many designs include suspension to alleviate this).
:Visibility of the road. The distance from the eyes to the front end is somewhat larger than an upright, and also the rider cannot lean forward. This leads to a bad insight angle at sharp corners. (Car drivers have the same problem, though less acute, since they are closer to the middle of the street.) It's also a bit more difficult to glance back. Many recumbent riders address this by adding helmet or handlebar mirrors.
:Visibility. In urban traffic, many recumbent bikes are below the eye level of many automobile drivers, but their "silhouette is more noticeable to drivers." Recumbent commuters often add flags, lighting, and reflective material to their bikes and gear to enhance visibility, and many refer to being able to see eye-to-eye with the automobile drivers as an advantage. cite web
url = http://www.biketcba.org/TRICORR/compare.html
title = Upright vs Recumbent Comparison Table
accessdate = 2007-04-21]
:Price. Recumbents are generally 10 - 15% more expensive than upright bikes of equivalent quality. Most are hand-built in comparatively small runs by independent manufacturers, usually with high specification components. At the low end, the vast majority of upright bikes sell for less than the cost of the cheapest new recumbent.
:Nonstandard design. Recumbents often have radically different shapes from diamond frame bikes, so conventional bike racks, automobile carriers, accessories, and locks don't fit in the usual ways.
:Safety Although recumbent bicycles are generally considered safer than upright bicycles, they do have some specific safety issues. A type of injury characteristic of recumbents called "leg suck" occurs when a foot touches the ground and the bike runs forward over the contact point, causing ligament damage and, in some cases, ankle fractures.Fact|date=May 2008 The use of clipless pedal reduces this possibility by preventing the foot from slipping off of the pedal. But with clipless pedals, remaining clipped in during a front tire or wheel failure at high speeds can result in the recumbent rolling over the rider and taking a clipped in leg or legs with it. This scenario, although very rare, can create severe spiral fractures of the
femurrarely seen with upright bicycles.Fact|date=May 2008
:Overlap of heels with the front wheel during tight turns with some short wheelbase (SWB) and some compact long wheelbase (CLWB) design is known as "heel strike." This is only evident during tight turns and can be avoided by lifting the heel or pausing pedalling. It is similar in many respects to "toe strike" in upright designs, which is similarly dependent upon design, implementation, size of feet and their position on the pedal and the presence or otherwise of fenders/mudguards.
Recumbent bicycle designs date back to the middle of the 19th century. A couple were patented around 1900 but the early designs were unsuccessful.
Recumbent designs of both prone and supine varieties can be traced back to the earliest days of the bicycle. Before the shape of the bicycle settled down following Starley's safety bicycle, there was a good deal of experimentation with various arrangements, and this included designs which might be considered recumbent. Although these dated back to the 1860s the first recorded illustration of a recumbent considered as a separate class of bicycle is considered to be in the magazine Fliegende Blätter of September 10 1893. This year also saw what is considered the first genuine recumbent, the Fautenil Vélociped. Patent applications for a number of recumbent designs exist in the late years of the 19th century, and there were discussions in the cycling press of the relative merits of different layouts. The Challand designs of 1897 and the American Brown of 1901 are both recognisable as forerunners of today's recumbents.
A crucial story in the history of recumbent cycling began with the design of a four-wheeled pedal-propelled car called the '
Velocar' (or 'Vélo couché') built in the early 1930s by French inventor and light car builder Charles Mochet. Velocars sold well to French buyers who could not afford a motor car, possibly because of a poor economyduring the Great Depression. The four-wheeled Velocars were fast but didn't corner well at high speed. Mochet then experimented with a three-wheel design and finally settled on a two-wheel design.
To demonstrate the speed of his recumbent bicycle, Mochet convinced cyclist Francis Faure, a Category 2 racer, to ride it in races. Faure was highly successful, defeating many of Europe's top cyclists both on the track and in road races, and setting new world records at short distances. Another cyclist, Paul Morand, won the Paris-Limoges race in 1933 on one of Mochet's recumbents.
7 July 1933at a Paris velodrome, Faure rode a Velocar 45.055 km (27.9 miles) in one hour, smashing an almost 20-year-old hour recordheld by Oscar Egg. Since the one-hour record was one of the most important in all of cycling, that accomplishment attracted a great deal of attention. Less than two months later, on 29 August 1933, Maurice Richard, riding an upright bicycle, also bettered Egg's one-hour record.
Union Cycliste Internationale(UCI) met in February, 1934, manufacturers of upright bicycles lobbied to have Faure's one-hour record declared invalid. On 1 April 1934, the UCI published a new definition of a racing bicycle that specified how high the bottom bracket could be above the ground, how far it could be in front of the seat and how close it could be to the front wheel. The new definition effectively banned recumbents from UCI events and guaranteed that upright bicycles would not have to compete against recumbentsRecumbents share this historical profile with Catamarans, which were also banned for unfair performance reasons and their unconventional design.] . For all intents and purposes, the ban is still in effect.
After the decision, Faure continued to race, and consistently beat, upright bicycles with the 'illegal' (according to the UCI) Velocar.
In 1938 Faure and Mochet's son, Georges, began adding fairings to the Velocar in hopes of bettering the world record of one hour for a bicycle with aerodynamic components. On
5 March 1938, Faure rode a faired Velocar 50.537 kilometers in an hour and became the first cyclist to travel more than 50 kilometers in an hour without the aid of a pace vehicle.
The UCI ban on recumbent bicycles and other aerodynamic improvements virtually stopped development of recumbents for four decades. Although recumbent designs continued to crop up over the years they were mainly the work of lone enthusiasts and numbers remained insignificant until the 1970s.
While developments had been made in this fallow period by Paul Rinkowski and others, the fathers of the modern recumbent movement are usually said to be Chester Kyle and particularly
David Gordon Wilsonof MIT, two engineers working in the USA. Kyle and his students had been experimenting with fairings for upright bicycles, also banned by the UCI, leading in 1974 to the International Human Power speed Championship, from which the IHPVAgrew.
The Avatar 2000, an LWB bike very much like the current Easy Racers products, arrived in 1979, and is often considered the first modern production recumbent. It was [http://ryanownersclub.com/scrapbook/avatar/brainstorm/ featured] in the 1983 film Brainstorm, ridden by Christopher Walken, and in the popular cycling reference "Richard's Bicycle Book" by
Richard Ballantine. The oil crises of the 1970s sparked a resurgence in cycling coincident with the arrival of these "new" designs. Since competition was not a driving force, the UCI ruling did not hinder the commercial development of recumbent designs. The influence of Kyle and Wilson and their students probably also had a lot to do with the strength of this renaissance.
A parallel but somewhat separate scene grew up in Europe, with the first European human power championships being held in 1983. The European scene was more dominated by competition than was the US, with the result that European bikes are more likely to be low SWB machines, while LWB are much more popular in the US (although there have been some notable European LWB bikes, such as the Peer Gynt).
In the 1980s
In 1984 Linear recumbents (of Iowa) began producing what was at the time arguably one of the most comfortable and relaxing bicycles available. Their stability, handling, comfortable seat and natural arm position made them a relaxing form of transportation, recreation and exercise. One rider, returning from their first test ride said, "If my butt had wheels this is what it would be like!"
Linear ownership has changed hands since the 80's. In 2002 Linear Manufacturing's assets were bought by Bicycle Man LLC and moved to New York. Since then owner Peter Stull has been working with senior engineering students at
Alfred University, local engineers and machinists utilizing available technology including computer FEA testing to improve their recumbent bikes and bring an old favorite into the new century.
In the UK in the 1980s the most publicised recumbent cycle in the UK was the delta configuration, sometime electrically powered
Sinclair C5. Although sold as an "electric car", the C5 would be more accurately characterised as a recumbent tricycle with electrical assistance, with all the associated advantages and disadvantages.
In the 2000s
A number of recumbent manufacturers went out of business after the 1990s, including BikeE and Vision.
Over distances recumbent bicycles outperform upright bicycles as evidenced by their dominance in ultra-distance events like 24 hours at Sebring (http://www.ultracycling.com/results/sebring2006.html) Official speed records for recumbents are governed by the rules of the
International Human Powered Vehicle Association. A number of records are recognised, the fastest of which is the "flying 200 m", a distance of 200 m on level ground from a flying start with a maximum allowable tailwindof 1.66 m/s. The current record is 130.36 km/h (81.00 mph), set by Sam Whittinghamof Canadaon a fully faired Varna Diablo front-wheel-drive recumbent lowracer bicycle designed by George Georgiev. The official record for an upright bicycle under somewhat similar conditions is 82.53 km/h (51.29 mph) set by Jim Glover in 1986 with an English-made Moulton bicycle with a hardshell fairing around him and the bike.
hour recordis 87.123 km (54.136 mi), set by Damjan Zabovnik on July 12, 2008. The equivalent record for an upright bicycle is 49.700 km (30.882 miles), set by Ondřej Sosenkain 2005. The UCI no longer considers the bike Chris Boardmanrode for his 1996 record to be in compliance with its definition of an upright bicycle. Boardman's Monocoquebike was designed by Mike Burrows, whose Windcheetah recumbent trike (see above) also holds the record from Land's End to John o' Groats, convert|861|mi|km|0 in 41 h 4 min 22 s with Andy Wilkinson riding.
In 2003, Rob English took on and beat the UK 4-man pursuit champions VC St Raphael in a 4000 m challenge race at Reading, beating them by a margin of 4 min 55.5 s to 5 min 6.87 s - and dropping one of the St Raphael riders along the way.
As well as road-going recumbents bicycles with wheels, stationary versions also exist. These are often found in gyms but are also available for home use. Like a regular stationary exercise bike, these stay in one place and the user pedals against some kind of resistance mechanism such as a fan or alternator but in a recumbent position. These have the same comfort advantages as road-going recumbents. Stationary recumbents almost always have a fairly upright seat and the pedal crank is lower than the level of the seat. The seat is normally adjustable and is adjusted by sliding it along a rail. The heads-up position also makes it easier to watch TV.
Bicycle and motorcycle dynamics
Bicycle and motorcycle geometry
International Human Powered Vehicle Association
* cite book
last = Fehlau
first = Gunnar
title = The Recumbent Bicycle
edition = 2nd edition
year = 2003
publisher = Out Your Backdoor Press
id = ISBN 1-892590-58-1
* cite book
last = Fehlau
first = Gunnar
title = The Recumbent Bicycle
edition = 3rd edition
year = 2006
publisher = Out Your Backdoor Press
id = ISBN 1-892590-59-X
* [http://www.hpv.org/technik/erde/type.php Recumbent Types] (in German)
* [http://www.liegeradmagazin.de/liegerad_modelle.html Recumbent Models] (in German)
* [http://renekmueller.com/Recumbents Recumbent History & Typology]
* [http://www.wisil.recumbents.com/wisil/fastest_list.asp Fastest Bicycles: Top Speed and One Hour Performances List - updated frequently]
* [http://www.wisil.recumbents.com/wisil/records/fastest_ever.htm Fastest Bicycles (HPVs) Ever - beyond 50 mph (80 km/h)]
* [http://www.wisil.recumbents.com/wisil/records/Fastest_one_hour2007.htm Best Hour Performances - HPVs that exceeded Chris Boardman's mark: updated March 2007]
* [http://www.wisil.recumbents.com/wisil/records/Fastest_one_hour2005.htm Best Hour Performances - HPV and UCI bikes - note, not as current as the above list, but contains more UCI bike listings]
* [http://recumbentcycling.blogspot.com/ The People of Recumbent Cycling]
* [http://www.geospot.eu/index.php?option=com_google_maps&category=32 Overview European recumbent manufacturers and dealers (Google Maps)]
* [http://recumbentriders.org/ Recumbent Riders International - Find Other Local Recumbent Riders]
Wikimedia Foundation. 2010.
Look at other dictionaries:
Bicycle suspension — refers to the system or systems used to suspend the rider and all or part of the bicycle in order to protect them from the roughness of the terrain over which they travel. Bicycle suspension are used primarily on mountain bicycles, but are also… … Wikipedia
Recumbent — may refer to:* Recumbent bicycle, a bicycle which places the rider in a seated or supine position * Recumbent stone circles, a variation on the more familiar standard stone circles found throughout the UK … Wikipedia
Bicycle lighting — has two purposes: seeing and being seen. There are many types of bicycle lights available, each with its own advantages and disadvantages. There is no one best solution for any rider, and many riders mix and match different technologies to… … Wikipedia
Bicycle — For other uses, see Bicycle (disambiguation). A mountain bike, a popular multi use bicycle. A bicycle, also known as a bike, pushbike or cycle, is a human powered, pedal driven, single track vehicle, having two wheels attached to a frame, one… … Wikipedia
Bicycle touring — Expedition type bicycle touring Cordillera del Paine Bicycle touring is cycling over long distances – prioritizing pleasure and endurance over utility or speed. Touring can range from single day supported rides e.g., rides to benefit charities… … Wikipedia
Bicycle Torque Coupling — An S and S Coupling also known as a Bicycle Torque Coupling or BTC is a coupling which enables bicycle frames to be separated into smaller pieces, usually to facilitate packing and transporting. They can be built into the frame by the frame… … Wikipedia
Bicycle gearing — The gearing on a bicycle is the selection of appropriate gear ratios for optimum efficiency or comfort. Different gears and ranges of gears are appropriate for different people and styles of cycling. Multi speed bicycles allow gear selection to… … Wikipedia
Bicycle performance — Lance Armstrong in a 2004 Tour de France individual time trial … Wikipedia
Bicycle seat — A bicycle seat, unlike a saddle is designed to support 100% of the riders weight and is found attached to a recumbent bicycle. Arthur Garford is credited as the inventor of the padded bicycle seat in 1892.Bicycle seats come in three main styles;… … Wikipedia
bicycle — I (New American Roget s College Thesaurus) n. tandem, two wheeler, bike (inf.). See vehicle. II (Roget s IV) n. Syn. cycle, machine, velocipede, ten speed, five speed, three speed, racer, tandem, bicycle built for two, stationary bicycle,… … English dictionary for students