Optode

An optode or optrode is an optical sensor device that optically measures a specific substance usually with the aid of a chemical transducer.

Contents

Construction

An optode requires three components to function: a chemical that responds to an analyte, a polymer to immobilise the chemical transducer and instrumentation (optical fibre, light source, detector and other electronics). Optodes usually have the polymer matrix coated onto the tip of an optical fibre, but in the case of evanescent wave optodes the polymer is coated on a section of fibre that has been unsheathed.

Operation

Optodes can apply various optical measurement schemes such as reflection, absorption, evanescent wave, luminescence (fluorescence and phosphorescences), chemiluminescence, surface plasmon resonance. By far the most popular methodology is luminescence.

Luminescence in solution obeys the linear Stern–Volmer relationship. Fluorescence of a molecule is quenched by specific analytes, e.g., ruthenium complexes are quenched by oxygen. When a fluorophore is immobilised within a polymer matrix a myriad of micro-environments are created. The micro-environments reflect varying diffusion co-efficients for the analyte. This leads to a non-linear relationship between the fluorescence and the quencher (analyte). This relationship is modelled in various ways, the most popular model is the two site model created by James Demas (University of Virginia).

The signal (fluorescence) to oxygen ratio is not linear, and an optode is most sensitive at low oxygen concentration, i.e., the sensitivity decreases as oxygen concentration increases. The optode sensors can however work in the whole region 0–100% oxygen saturation in water, and the calibration is done the same way as with the Clark type sensor. No oxygen is consumed and hence the sensor is stirring insensitive, but the signal will stabilize more quickly if the sensor is stirred after being put into the sample.

Popularity

Optical sensors are growing in popularity due to the low-cost, low power requirements and long term stability. They provide viable alternatives to electrode-based sensors or more complicated analytical instrumentation.

Major international conferences are devoted to their development e.g., Europtrode VIII Tübingen 2006, OFS 18, Cancun 2006.

See also

Oxygen sensor


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • optode — noun An optical sensor device that optically measures a specific substance …   Wiktionary

  • Oxygen sensor — Contents 1 Automotive applications 1.1 Function of a lambda probe 1.2 The probe …   Wikipedia

  • Oxygen — This article is about the chemical element and its most stable form, O2 or dioxygen. For other forms of this element, see Allotropes of oxygen. For other uses, see Oxygen (disambiguation). nitrogen ← oxygen → fluorine ↑ O ↓ …   Wikipedia

  • Ruthenium — (pronEng|ruːˈθiːniəm) is a chemical element that has the symbol Ru and atomic number 44. A rare transition metal of the platinum group of the periodic table, ruthenium is found associated with platinum ores and used as a catalyst in some platinum …   Wikipedia

  • List of sensors — * Accelerometer * Touch sensor * Active pixel sensor * Air flow meter * Alarm sensor * Bedwetting alarm * Bhangmeter * Biochip * Biosensor * Breathalyzer * Capacitance probe * Carbon paste electrode * Carbon monoxide detector * Catadioptric… …   Wikipedia

  • Oxygen saturation — or dissolved oxygen (DO) is a relative measure of the amount of oxygen that is dissolved or carried in a given medium. It can be measured with a dissolved oxygen probe such as an oxygen sensor or an optode in liquid media, usually water. It has… …   Wikipedia

  • Quenching (fluorescence) — Quenching refers to any process which decreases the fluorescence intensity of a given substance. A variety of processes can result in quenching, such as excited state reactions, energy transfer, complex formation and collisional quenching. As a… …   Wikipedia

  • Stern-Volmer relationship — The Stern Volmer relationship, named after Otto Stern and Max Volmer, [ O. Stern and M. Volmer Über die Abklingzeit der Fluoreszenz , Physik. Zeitschr. 20 183 188 (1919) as cited in Mehra and Rechenberg, Volume 1, Part 2, 2001, 849.] allows us to …   Wikipedia

  • Équation de Stern-Volmer — L’équation de Stern Volmer, qui doit son nom aux physiciens Otto Stern et Max Volmer[1], régit la cinétique d un mécanisme de désactivation photochimique intermoléculaire. La fluorescence et la phosphorescence constituent des exemples de… …   Wikipédia en Français


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.