Motorcycle safety clothing

To improve motorcycle safety many countries mandate the wearing of protective clothing by motorcyclists, especially a helmet. Other protective gear may include certain types of jackets, gloves, boots, and pants. Jackets meant for motorcyclists are typically made of nylon, leather, or Kevlar. These jackets typically include heavy padding on the elbow, spine, and shoulder regions. Gloves are generally made of leather or Kevlar and some include carbon fiber knuckle protection. Boots, especially those for sport riding, include reinforcement and plastic caps on the ankle and toe areas. A well-protected motorcyclist will wear boots with heels that fit on motorcycle foot rests (pegs) and provide good ankle support. Pants are usually leather, nylon, or Kevlar. Except for helmets, none of these items are required by law in any state in the U.S. but are recommended by many of those who ride.

"Off road" riders wear a range of plastic armour to protect against injury from falling off, hitting other riders and bikes, debris kicked up from the rear wheel of leading bikes, and from running into track barriers protecting the public. This armour protects the extremities from breakage and dislocation and the back and chest from strain and broken bones. Although fairly efficient, it is of course not always completely effective. Many riders wear "roost protectors" designed specifically to protect against painful debris from other bikes, but are of no use in a fall or collision.

Leathers

"Leathers" are 1-piece suits, or 2-piece jackets and trousers worn by motorcyclists mainly for protection in a crash. The leather used is not fashion leather but protective leather which is stronger, moderately flexible and much tougher.Both leathers and joins (seams and zips) should be officially tested for ergonomics and impact abrasion, cut, tear and burst resistance. They do not have to be too heavy and there is no such thing as competition leather - just safe and unsafe leather and joins. The most common leather used for motorcycle wear is from cattle such as beef. An inexpensive 1.1–1.2 mm South American beef leather is both attractive and flexible and was considered entirely adequate in the 1990s for good road and racing suits.
Kangaroo leather is becoming popular for its suppleness, light weight and strength compared with cowhide. The one-piece racing leather suit, usually referred to as 'racing leathers' was first used by legendary, ex-world champion motorcycle racer Geoff Duke. His suits, like the majority of those used in the 1950s, were made from horse hide.

Originally, motorcycle leathers were adapted from tank corps gear immediately following World War I. Duster coats, which tended to catch in the wheels, were switched for short coats. Wide-pegged breeches were worn by some motorcycle police and by dispatch riders in World War II, but were largely abandoned in the post-war years because of their association with certain Nazi uniforms.

Currently there are two major styles of motorcycle leathers: the tight fitting and sometimes colorful one or two piece suits based on motorcycle racing leathers; and the somewhat looser fitting leather trousers and jackets, usually black and often decorated with metal studs and tassels. The latter style, the jackets in particular, are also worn by people who are fond of the style but do not ride motorcycles. The classic American Perfecto motorcycle jacket with epaulets and diagonal zipper, made famous by Marlon Brando in "The Wild One," (1954) was invented in 1928 by Irving Schott, of Schott NYC in New York City. Leather chaps, adapted from cowboy gear, were used by American bikers starting in the early 1960s.

Many modern leathers have armour on the inside at major impact regions such as shoulders, elbows, hips, knees and back. The energy absorbers and load spreaders range from high density foam to foam backed hard polymers and carbon fibre. It is designed to spread the impact load and shear strains to prevent and reduce harm levels of injury and disablement. In Europe, by law, it has to have a CE mark. However, the present European performance level is considered by some to be very low. They argue that a much higher standard is required, because there are many superior materials and combinations available. There are also motorcycle jackets that use an airbag system, which deploys in the event of an accident, inflating to protect the riders neck, torso, and lower back.

Typically, an accident at a race track will result in the racers sliding, rolling and tumbling for comparatively long distances and long times compared to an accident on the public road. This is because of the large safety run-off areas found on most race tracks; hence racers have a much lower probability of hitting hard vertical solid objects during a crash. Some racing leathers have additional protection properties to increase sliding and decrease bouncing and rotation. Racers mostly hit horizontal surfaces experiencing large high speed shear strains which may cause ligament tears. To decrease or prevent such injuries, most modern racing suits have an area that helps sliding at the knees, shoulders and elbows – often made of titanium or high-density plastic, so the rider slides more along the track environment and so decreases the bouncing and rotation through the air, which may cause worse injuries from angular accelerations and rotational forces.

Textile clothing

Increasingly, motorcyclists are choosing protective equipment constructed of man-made textiles rather than leather due to their improved weather protection, from heat, cold and water, and the increased utility these garments tend to provide in terms of pockets and vents. Common materials include high density (600–1000 Denier) ballistic nylon (e.g., Cordura) and Kevlar (or blends of Kevlar, Cordura, and Lycra) and often include waterproof liners made from materials such as Goretex. These artificial fabrics are said by some motorcyclists to be more comfortable, particularly in warm weather. The textile garments typically take less time to dry out, whereas leather gear may remain wet (and cold) for some time. However, some textile fabrics offer less abrasion protection than leather gear.

Textile protective clothing is also nearly always worn over ordinary clothing, whereas leather suits — particularly those manufactured for racing — are not. In addition, synthetic fabrics generally provide better protection from inclement weather. For these reasons, synthetics are often practical for commuters and can help make motorcycles an attractive alternative to four wheeled vehicles.

Not all textile clothing is made from synthetic materials. Heavy weight waxed cotton was used for many years before the development of modern materials, typified by the jackets made by companies such as Belstaff.

Performance claims range for textile motorcycle clothing from somewhat less to somewhat better than competition grade leathers. Key elements of performance include:

* strength - the protective clothing must maintain its integrity in the event of a crash
* abrasion resistance
* ability to slide instead of grabbing tarmac or concrete (grabbing would tumble the rider, likely resulting in greater injury)
* heat resistance - whilst sliding the friction with the road can result in enough heat to melt many synthetic materials
* ability to stretch and breathe (for comfort).

Additional protection may be provided by armour (CE approved is desirable) and airbag systems.

As with other protective gear, having light colored clothing improves your conspicuity (visibility to other people using the road).

Proper fit

Whatever materials one chooses for one's motorcycle gear, it is important to get the correct fit when purchasing it. Incorrectly fitted garments may result in excessive injury if armour shifts out of position during a riding mishap. Flapping due to loose-fit also creates unnecessary wear and tear, wind drag, noise, and can distract the rider. In the event of a fall, loose garments may grab the road surface, resulting in a tumble rather than a slide. Two piece suits often come with zips to join the jacket and trousers/jeans together, thus improving safety in the event of a crash.

Boots

Boots are worn by motorcycle riders and passengers to prevent or reduce harm to their feet and ankles while riding and in the event of a crash. Tough, strong, moderately flexible boots with stiff soles provide the rider protection from a number of risks. Boots with oil-resistant, rubber-based composite soles give a grip on the pavement and help keep the rider's feet on the pegs. If the boots have heels, they should be low and wide to provide a stable base when standing with the bike. In a crash, boots may prevent or reduce foot and ankle injuries. As with jackets and trousers, boots should be designed specifically for motorcycling, using materials and seam construction that are impact, abrasion, cut, tear and burst resistant. Strong, tough, and flexible leather or synthetic fabrics have suitable properties. Boots should also have energy absorbers and load spreaders on the shin, inside and outside of each ankle. A stiff sole working laterally helps prevent or decrease crash injuries caused by crushing and shear strain.

Helmet

A motorcycle helmet is protective headgear used by motorcycle riders. The primary goal of a motorcycle helmet is to protect the rider's head during impact, although many helmets provide additional protection such as a face shield. In some countries the wearing of motorcycle helmets is mandatory.

Helmets are made in 2 main layers: hard and energy-absorbing. The hard shell spreads an impact over a larger area, while the liner (often polystyrene foam) absorbs energy so less is transferred to the skull & brain.

There are 2 main styles: open-face and full-face. An open-face helmet will protect everything but the face. Full-face helmets protect the skull, plus providing protection for the lower jaw as well as the face itself. Full-face helmets offer much more protection than open-face helmets.

Several manufacturers have introduced full-face helmets with a flip-up front, combining the protection of a full-face with the ease of communication and donning / doffing that an open-face gives.

Studies have consistently shown that wearing a helmet:Fact|date=December 2007
* Reduces injury & increases a rider's chance of surviving a crash
* Does not impair vision or hearing
* Does not contribute to neck injuries

As with other protective gear, a light colored helmet improves the user's visibility.

Gloves

Motorcycling gloves are typically gloves made of leather. They may have gauntlets to protect the rider's wrists from injury, and help reduce drafts while riding in colder climates. Motorcycling gloves typically have reinforced palms intended to protect the rider from abrasion injuries in case of an accident.

Optional features include additional protection or weatherproofing. For touring gloves, such additional features may include advanced insulating materials and waterproof/breathable fabric, although touring gloves may still lack advanced armouring features used in motorcycle racing gloves.

Gloves intended for motorcycle racing typically incorporate precurved finger sections and the best available protection, obtained through additional armour incorporated within the glove. Although maximum tacility is an obvious starting point for racing gloves, additional protection should not be discarded. Additional protection may involve titanium or carbon panels for knuckles and the joints of the fingers. Furthermore, racing gloves may and often do incorporate additional wrist and other protection panels to protect the heel of the hand, back of the hand and other easily injured parts of the hand.

External links

* [http://bmj.bmjjournals.com/cgi/content/full/328/7444/0-b "Eye catching gear may reduce motorcycle injuries"] , Summary of New Zealand paper studying effect of rider visibility on accidents. (Full paper available at link.)
* [http://www.roadsafety.mccofnsw.org.au/a/88.html Motorcycle Council of NSW - Road Safety - Jacket and Pants]
* [http://motorbikeclaims.org.uk/blogs/2/Perfect-Biking-Video.html UK Motorbike Road Safety Video Information Clip]


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Motorcycle safety — US Navy motorcycle training at …   Wikipedia

  • Motorcycle — For other uses, see Motorcycle (disambiguation). A 1954 Triumph T110 650 cc motorcycle …   Wikipedia

  • Motorcycle armor — comes in a variety of forms, from traditional yellow foam to high tech compounds capable of absorbing large amounts of energy. In its basic form an armored jacket will include shoulder and elbow armor. Pants will include hip and knee protection.… …   Wikipedia

  • Safety — is the state of being safe (from French sauf ), the condition of being protected against physical, social, spiritual, financial, political, emotional, occupational, psychological, educational or other types or consequences of failure, damage,… …   Wikipedia

  • Motorcycle personal protective equipment — A motorcyclist wearing helmet, gloves, boots and leathers slides along a racetrack after crashing …   Wikipedia

  • Motorcycle helmet — A collection of motorcycle helmets worn by Moto GP racer Valentino Rossi A motorcycle helmet is a type of protective headgear used by motorcycle riders. The primary goal of a motorcycle helmet is motorcycle safety to protect the rider s head… …   Wikipedia

  • Clothing — in history Clothing refers to any covering for the human body that is worn. The wearing of clothing is exclusively a human characteristic and is a feature of nearly all human societies. The amount and type of clothing worn depends on functional… …   Wikipedia

  • Motorcycle accessories — are features and accessories selected by a motorcycle owner to enhance safety, performance, or comfort, and may include anything from mobile electronics to sidecars and trailers. An accessory may be added at the factory by the original equipment… …   Wikipedia

  • High-visibility clothing — High visibility clothing, a type of personal protective equipment (PPE), is any clothing worn that has highly reflective properties or a color that is easily discernible from any background. Orange hunting vests are a popular example of high… …   Wikipedia

  • Outlaw motorcycle club — This article is about criminal or non conforming motorcycle clubs. For the club established in McCook, Illinois in 1935, see Outlaws Motorcycle Club. For general types of motorcycling groups, see Motorcycle club. Various outlaw motorcycle clubs… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.