Analog passthrough is a feature found on some digital-to-analog television converter boxes. Boxes without analog passthrough only allow digital TV (
ATSCstandard) to be viewed on older, analog-only ( NTSCstandard) TVs. Those with analog passthrough allow both digital and analog television to be viewed on older TVs.
All digital-to-analog converter boxes have both an antenna input (which accepts the
coaxial cablethat formerly went directly to the TV) and an RF output (which now goes directly to the TV). They may also have additional outputs. Any converter box converts the digital signal for the current digital sub-channel to an analog signal (at the reduced screen resolution of the analog standard), outputs that signal onto analog channel 3 or 4 (set by the user to avoid any conflict with local over-the-air channels) and sends that signal to the analog tuner in the TV. With a box that lacks analog passthrough, no other signals are sent to the output, so all analog stations are lost.
Primarily affected are low-power and
broadcast translatorstations, as these are exempt from the FCC mandate to switch to digital broadcasting in 2009, as well as foreign signals that will remain in analog form. A small number of TV receivers were also manufactured with built-in broadcast radioreceivers; these included some small portable devices or (more rarely) sets marketed for hotel/motel use. If used with DTV converter boxes, these will need analog passthrough in order not to block incoming FM radiosignals. [ [http://www.dtv.gov/consumercorner.html#faq33 DTV.gov FAQ] ]
There are several approaches used with converter boxes that lack analog passthrough:
# Accept the reduced analog channel reception.
# Unplug the antenna from the converter box and plug it directly into the TV when watching analog TV.
# Install a splitter so the antenna signal is sent to both the converter box and TV. Unfortunately, this approach will substantially reduce the signal strength which arrives at both the converter box and TV.
# Install an amplified splitter in order to boost the signal strength before feeding it to converter and TV.
# Install an A-B switch box to allow selection of whether the signal goes to the converter box (when watching digital TV) or directly to the TV (when watching analog TV). A-B boxes are seldom remote controlled, however.
# Use two different TVs, one with a converter box for digital TV and one without for analog TV.
# Use a splitter before the converter and a frequency-selective combiner (a VHF/UHF splitter/combiner where analog stations are UHF or a channel 3/4 "signal inserter" otherwise) to place converted signals on an unused channel.
# Use a conventional all-female splitter before the converter and a reversed splitter before the television.For pass through, which allows analog tv and fm radio (if the tv also has a radio tuner), plug a standard coaxial patch cable between the two splitters. For dtv, unplug one end of the patch between the splitters, otherwise there will be a hideous signal loss.
# For TVs with two coax antenna inputs, or one coax input and another type of
composite videoinput which matches an output on the converter box, you can use two antennas, one going to the converter box and one going to the additional coax input on the TV, or to not require another antenna, a splitter to direct the antenna to both inpputs.
None of these solutions are ideal, however, requiring additional hardware (A-B boxes, splitters, or additional antennae or TVs) or manual intervention to change between digital and analog TV. [ [http://www.fcc.gov/cgb/consumerfacts/converterbox-analog-digital.html Setting Up Your Digital-to-Analog Converter Box - FCC Consumer Facts] ]
Some converter boxes offer analog passthrough, meaning that the same output cable which carries the converted digital signal (on analog channel 3 or 4) while the converter is operating also retains all remaining analog signals upon turning the converter box off.
While this typically works to some extent with the converter box on, there is often significant signal strength reduction and/or interference on the original analog channels.
Note that analog passthrough signals are only passed to the coax output, not to any other outputs provided by the unit. While other converter outputs may still be connected and used for digital TV reception, the coaxial RF output must remain connected to pass analog TV signals.
For some VCRs (and, less often, TVs) this arrangement may cause a problem if the receiver uses the presence of active
composite videoor S-videoconnections to indicate that the signal should be accepted from those sources only. In such a case the two options would be to use the coax output exclusively, either when viewing analog TV only (which requires plugging and unplugging cables) or full time (with the reduced digital TV quality produced using the coax output).
The majority of TVs have a button on the unit and/or remote labeled something like "TV/VIDEO", "INPUT" or "AUX" which manually switches between coax and other sources, ensuring no problems when using both sets of connections simultaneously.
United States implementation
In the US, conversion to digital TV from analog is expected to be complete by February 17, 2009. There are exceptions, however:
# Class A stations, low power stations, and translator stations may continue to send analog signals [http://www.fcc.gov/cgb/consumerfacts/DTVandLPTV.pdf] with no mandatory date to convert to digital broadcasting.
# Cross-border stations, many of which are significantly viewed in the US, [ [http://www.fcc.gov/mb/significantviewedstations.pdf FCC list of significantly-viewed stations, including foreign signals] ] will continue to broadcast in analog format until 2011 from
Canada, [ [http://www.ic.gc.ca/epic/site/oca-bc.nsf/en/ca02336e.html Industry Canada DTV transition (in English)] ] and 2021 from Mexico. [ [http://www.cofetel.gob.mx/wb/Cofetel_2008/Cofe_calendario_de_transicion Cofetel (México) digital transition calendar (in Spanish)] ]
#People near or in the
Florida Keysor Evergladescould probably receive Analog Channels from Cuba.
#People in Eastern Florida may receive
ZNS-TVfrom The Bahammas
Many will want to continue to receive analog stations both before and beyond the February, 2009 transition date. In setting its requirements for
coupon-eligible converter boxes (CECBs), the NTIA permits, but does not require, analog passthrough as an available feature.
Unfortunately, only one of the initially available converter boxes included this feature. In late
March 2008, the Community Broadcasters Associationfiled a lawsuitin the U.S. Court of Appeals for the District of Columbia, seeking an injunctionto halt the sale and distribution of DTV converter boxes, [ [http://www.dtvnow.org/links.php?linkno=273 LPTV Industry Calls DTV Converter Box Program Into Question ] ] charging that their failure to include analog tuners or analog passthrough violates the All-Channel Receiver Act. [ [http://broadcastengineering.com/newsrooms/community_broadcasters_association_petitions_0328 Community Broadcasters Association petitions court to order DTV converter halt ] ] CBA maintained that the lack of analog support would seriously harm the LPTVand class A televisionstations the group represents, as it is cost-prohibitive for many or most of them to convert to digital transmissions, [ [http://www.tvnewsday.com/articles/2007/11/15/daily.2/?promo Tvnewsday - For Lptv, Dtv Is A Countdown To Disaster ] ] and the new boxes would prevent viewers from being able to watch (or even being aware of the existence of) their analog-only stations. [ [http://www.usatoday.com/tech/techinvestor/industry/2008-03-26-small-stations-digital-tv_N.htm Small stations claim digital TV switch will bankrupt them - USATODAY.com ] ] [ [http://www.keepuson.com KeepUsOn.com ] ]
Responding to CBA's actions, the FCC and NTIA urged manufacturers to include the feature voluntarily in all converter boxes, and manufacturers responded by releasing a new generation of models with the feature. Some new
DVD recorders and personal video recorders also provide both analog and digital tuners, and therefore could perform the basic functions of a set-top box in both modes.
May 2008, the D.C. district court denied the CBA petition without comment, [ [http://www.tvtechnology.com/pages/s.0157/t.13436.html Court Denies CBA Petition on Analog Pass-Through] ] effectively telling the association that it had not exhausted all its efforts, and that there was not enough merit to take the case to the courts. The CBA responded by concentrating its lobbying efforts on the FCC, and by urging more funding for low power and Class A broadcasters to transition to digital, asking Congress to increase the number of such stations eligible for funds.
Set-top boxand coupon-eligible converter box
All-Channel Receiver Act
Composite videoand S-video
Comparison of CECB units- Denotes which boxes include analog passthrough.
Wikimedia Foundation. 2010.
Look at other dictionaries:
Coupon-eligible converter box — TV Converter Box Coupon Program URL https://www.dtv2009.gov/[dead link] … Wikipedia
Digital television transition in the United States — Further information: Digital television transition The DTV (an abbreviation of digital television, also called digital broadcast) transition in the United States was the switchover from analog (the traditional method of transmitting television… … Wikipedia
Digital television adapter — A digital TV converter box A digital television adapter (DTA), or digital to analog converter [set top box], or commonly known as a converter box, it is a television tuner that receives a digital television (DTV) transmission, and converts the… … Wikipedia
ATSC tuner — Multiple MPEG programs are combined then sent to a transmitting antenna. In the US broadcast digital TV system, an ATSC receiver then decodes the TS and displays it on a TV. An ATSC (Advanced Television Systems Committee) tuner, often called an… … Wikipedia
Community Broadcasters Association — The Community Broadcasters Association (CBA) was a trade organization representing low power broadcasting interests, including LPTV and Class A television stations, in the United States of America. It ceased operations in 2009. Key issues… … Wikipedia
Retro Television Network — Type Broadcast television network Branding … Wikipedia
Digital television in Canada — (more specifically, digital terrestrial television in Canada or digital over the air television (OTA) in Canada) is transmitted using the ATSC standards developed for and in use in the United States. Because Canada and the U.S. use the same… … Wikipedia
Digital television in the United States — See digital television for more technical details, or DTV transition in the United States for specific information related to the analog to digital switchover In the United States, digital television broadcasts, or DTV, can be received via cable … Wikipedia
Minnesota Channel — Type Educational television, public affairs, ethnic and local programming Country United States … Wikipedia
The Ohio Channel — is a Public television channel in the U.S. state of Ohio. It is produced by a consortium of the state s public broadcasting stations, and carried on the digital subchannels of many of those stations. Its programming consists of live and delayed… … Wikipedia