There are many types of keyboards, usually differentiated by the switch technology employed in their operation. Keyboards are defined by the number (usually about 80–110) of highly durable switches that are incorporated into the system. The choice of switch technology affects key response (the positive feedback that a key has been pressed) and travel (the distance needed to push the key to enter a character reliably). Newer models use hybrids of various technologies to achieve greater cost savings.
- 1 Types
- 2 Debouncing
- 3 Keytops
- 4 Other parts of the PC keyboard
- 5 Keyboard switch matrix
- 6 Notes
- 7 External links
There are two types of membrane-based keyboards, flat-panel membrane keyboards and full-travel membrane keyboards:
Flat-panel membrane keyboards are most often found on appliances like microwave ovens or photocopiers. A common design consists of three layers. The top layer (and the one the user touches) has the labels printed on its front and conductive stripes printed on the back. Under this it has a spacer layer, which holds the front and back layer apart so that they do not normally make electrical contact. The back layer has conductive stripes printed perpendicularly to those of the front layer. When placed together, the stripes form a grid. When the user pushes down at a particular position, their finger pushes the front layer down through the spacer layer to close a circuit at one of the intersections of the grid. This indicates to the computer or keyboard control processor that a particular button has been pressed.
Generally, flat-panel membrane keyboards do not have much of a "feel", so many machines which use them issue a beep or flash a light when the key is pressed. They are often used in harsh environments where water or leak proofing is desirable. Although used in the early days of the personal computer (on the Sinclair ZX80, ZX81 and Atari 400), they have been supplanted by the more tactile dome and mechanical switch keyboards. However, membrane keyboards with interchangeable key layouts, such as the IntelliKeys and Discover:board are still commonly used by people with physical, visual, or cognitive disabilities as well as people who require assistive technology to access a computer.
Full-travel membrane-based keyboards are the most common computer keyboards today. They have one-piece plastic keytop/switch plungers which press down on a membrane to actuate a contact in an electrical switch matrix.
Dome switch keyboards are a hybrid of flat-panel membrane and mechanical keyboards. They bring two circuit board traces together under a rubber or silicone keypad using either metal "dome" switches or polyester formed domes. The metal dome switches are formed pieces of stainless steel that, when compressed, give the user a crisp, positive tactile feedback. These metal types of dome switches are very common, are usually reliable to over 5 million cycles, and can be plated in either nickel, silver or gold. The rubber dome switches, most commonly referred to as polydomes, are formed polyester domes where the inside bubble is coated in graphite. While polydomes are typically cheaper than metal domes, they lack the crisp snap of the metal domes, and usually have a lower life specification. Polydomes are considered very quiet, but purists tend to find them "mushy" because the collapsing dome does not provide as much positive response as metal domes. For either metal or polydomes, when a key is pressed, it collapses the dome, which connects the two circuit traces and completes the connection to enter the character. The pattern on the PC board is often gold-plated.
Both are common switch technologies used in mass market keyboards today. This type of switch technology happens to be most commonly used in handheld controllers, mobile phones, automotive, consumer electronics and medical devices. Dome switch keyboards are also called direct-switch keyboards.
See also: Chiclet keyboard
A special case of the computer keyboard dome-switch is the scissor-switch. The keys are attached to the keyboard via two plastic pieces that interlock in a "scissor"-like fashion, and snap to the keyboard and the key. It still uses rubber domes, but a special plastic 'scissors' mechanism links the keycap to a plunger that depresses the rubber dome with a much shorter travel than the typical rubber dome keyboard. Typically scissor-switch keyboards also employ 3-layer membranes as the electrical component of the switch. These stabilizing scissor-like devices extend the lifespan of the membrane to as much as 10 million keystrokes. They also usually have a shorter total key travel distance (2 mm instead of 3.5 – 4 mm for standard dome-switch keyswitches). This type of keyswitch is often found on the built-in keyboards on laptops and keyboards marketed as 'low-profile'. These keyboards are generally quiet and the keys require little force to press.
Scissor-switch keyboards are typically slightly more expensive. They are harder to clean (due to the limited movement of the keys and their multiple attachment points) but also less likely to get debris in them as the gaps between the keys are often less (as there is no need for extra room to allow for the 'wiggle' in the key as you would find on a membrane keyboard).
In this type of keyboard, pressing the key changes the capacitance of a pattern of capacitor pads. Unlike "dome switch" keyboards, the pattern consists of two D-shaped capacitor pads for each switch, printed on a printed circuit board (PC board) and covered by a thin, insulating film of soldermask which plays the role of a dielectric. The mechanism of capacitive switches is very simple, compared to mechanical ones. Its movable part is ended with a flat foam element (of dimensions near to a tablet of Aspirin) finished with aluminium foil below. The opposite side of the switch is a PC board with the capacitor pads.
When a key is pressed, the foil tightly clings to the surface of the PC board, forming a daisy chain of two capacitors between contact pads and itself separated with thin soldermask, and thus "shorting" the contact pads with an easily detectable drop of capacitive reactance between them. Usually this permits a pulse or pulse train to be sensed. The keys do not need to be fully pressed to be fired on, which enables some typists to work faster.
As of 2008 they are a rare find in generic PC keyboards. Vintage PCs may in some cases be equipped with this type of keyboard, because the original IBM keyboards for the Personal Computer, Personal Computer XT, and Personal Computer AT were Model F keyboards, which used the buckling spring mechanism to actuate a capacitative switch, unlike the 101-key Enhanced Keyboard, also known as the Model M, which also had the buckling spring mechanism, but a membrane contact switch. At the present time, the best-known keyboard for use with desktop personal computers that uses a capacitative switch is that made by Topre, either under its own name, or for Fujitsu, which sells a keyboard custom-manufactured for it to its specifications as the Happy Hacking Keyboard. The Topre mechanism uses a spring underneath a rubber dome, and the depression of the spring causes a change in capacitance between the underlying capacitor pads.
There are also industrial makes of flat-panel capacitive keyboards that are inexpensive, and they resist wear, water, foreign objects and dirt.
Mechanical-switch keyboards use real switches underneath every key. Depending on the construction of the switch, such keyboards have varying response and travel times. Notable keyboards utilizing this technology are the Apple Extended Keyboard (the original and/or the "II"), as well as its modern imitator, the Matias Tactile Pro. These two keyboards use ALPS switches. On PCs, the OmniKey series from Northgate Computers was popular, and the line is now carried by Creative Vision Technologies under the Avant brand.
Many typists prefer buckling-spring keyboards. The buckling spring mechanism (expired U.S. Patent 4,118,611) atop the switch is responsible for the tactile and aural response of the keyboard. This mechanism controls a small hammer that strikes a capacitive or membrane switch.
In 1993, two years after spawning Lexmark, IBM transferred its keyboard operations to the daughter company. New Model M keyboards continued to be manufactured for IBM by Lexmark until 1996, when Unicomp purchased the keyboard technology.
Today, new buckling-spring keyboards are manufactured by Unicomp. Unicomp also repairs old IBM and Lexmark keyboards.
Hall effect keyboards use magnets and Hall effect sensors instead of an actual switch. When a key is depressed, it moves a magnet, which is detected by the solid-state sensor. These keyboards are extremely reliable, and are able to accept millions of keystrokes before failing. They are used for ultra-high reliability applications, in locations like nuclear powerplants or aircraft cockpits. They are also sometimes used in industrial environments. These keyboards can be easily made totally waterproof. They also resist large amounts of dust and contaminants. Because a magnet and sensor is required for each key, as well as custom control electronics, they are very expensive.
A laser projection device approximately the size of a computer mouse projects the outline of keyboard keys onto a flat surface, such as a table or desk. This type of keyboard is portable enough to be easily used with PDAs and cellphones, and many models have retractable cords and wireless capabilities. However, sudden or accidental disruption of the laser will register unwanted keystrokes. Also, if the laser malfunctions, the whole unit becomes useless, unlike conventional keyboards which can be used even if a variety of parts (such as the keycaps) are removed. This type of keyboard can be frustrating to use since it is susceptible to errors, even in the course of normal typing, and its complete lack of tactile feedback makes it even less user-friendly than the cheapest membrane keyboards.
Some keyboards are designed out of flexible materials that can roll up in a moderately tight bundle. Normally the external materials are either silicone or polyurethane. It is important to note that although many manufacturers claim that the keyboards are foldable, they cannot be folded without damaging the membrane that holds the circuitry. Typically they are completely sealed in rubber, making them watertight like membrane keyboards. Like membrane keyboards, they are reported to be very hard to get used to, as there is little tactile feedback.
See Roll-away computer.
Optical keyboard technology
Also known as photo-optical keyboard, light responsive keyboard, photo-electric keyboard, and optical key actuation detection technology.
Optical keyboard technology was introduced in 1962 by Harley E. Kelchner for use in a typewriter machine with the purpose of reducing the noise generating by actuating the typewriter keys.
An optical keyboard technology utilizes light-emitting devices and photo sensors to optically detect actuated keys. Most commonly the emitters and sensors are located at the perimeter, mounted on a small PCB. The light is directed from side to side of the keyboard interior, and it can only be blocked by the actuated keys. Most optical keyboards require at least 2 beams (most commonly a vertical beam and a horizontal beam) to determine the actuated key. Some optical keyboards use a special key structure that blocks the light in a certain pattern, allowing only one beam per row of keys (most commonly a horizontal beam).
The mechanism of the optical keyboard is very simple – a light beam is sent from the emitter to the receiving sensor, and the actuated key blocks, reflects, refracts or otherwise interacts with the beam, resulting in an identified key.
Some earlier optical keyboards were limited in their structure and required special casing to block external light, no multi-key functionality was supported and the design was very limited to a thick rectangular case. None of the known optical technologies were ever developed to a mass-production stage, with the exception of MOBBAL Keyboard Technology by Aymer International. MOBBAL Technology allows almost any shape and design of keyboard and can be used for laptop and desktop keyboards, ATM keypads, etc.
The advantages of optical keyboard technology are that it offers a real waterproof keyboard, resilient to dust and liquids; it is electromagnetic emissions free (thus cannot be eavesdropped wirelessly); and it uses about 20% PCB volume, compared with membrane or dome switch keyboards, significantly reducing electronic waste. Additional advantages of optical keyboard technology over other keyboard technologies such as Hall effect, laser, roll-up, and transparent keyboards lie in cost (Hall effect keyboard) and feel – optical keyboard technology does not require different key mechanisms, and the tactile feel of typing has remained the same for over 60 years.
The specialist Datahand keyboard uses optical technology to sense keypresses with a single light beam and sensor per key. The keys are held in their rest position by magnets; when the magnetic force is overcome to press a key, the optical path is unblocked and the keypress is registered.
When striking a keyboard key, the key oscillates against its contacts several times before settling. When released, it bounces again until it reverts to its rest state. Although it happens on such a small scale as to be invisible to the naked eye, it's sufficient for the computer to register multiple key strokes inadvertently.
To resolve this problem, the processor in a keyboard (or computer) "debounces" the keystrokes, by aggregating them across time to produce one "confirmed" keystroke that (usually) corresponds to what is typically a solid contact. Early membrane keyboards limited typing speed because they had to do significant debouncing. This was a noticeable problem on the ZX81.
Keytops are used on full-travel keyboards. While modern keycaps are typically surface-printed, they can also be 2-shot molded, laser printed, sublimation printed, engraved, or they can be made of transparent material with printed paper inserts.
There are also Keycaps, which are thin shells that are placed over keytop bases. These were especially used on IBM PC keyboards.
Other parts of the PC keyboard
The modern PC keyboard also includes a control processor and indicator lights to provide feedback to the user about what state the keyboard is in. Depending on the sophistication of the controller's programming, the keyboard may also offer other special features. The processor is usually a single chip 8048 microcontroller variant. The keyboard switch matrix is wired to its inputs and it processes the incoming keystrokes and sends the results down a serial cable (the keyboard cord) to a receiver in the main computer box. It also controls the illumination of the "caps lock", "num lock" and "scroll lock" lights.
A common test for whether the computer has crashed is pressing the "caps lock" key. The keyboard sends the key code to the keyboard driver running in the main computer; if the main computer is operating, it commands the light to turn on. All the other indicator lights work in a similar way. The keyboard driver also tracks the shift, alt and control state of the keyboard.
Keyboard switch matrix
The keyboard switch matrix is often drawn with horizontal wires and vertical wires in a grid which is called a matrix circuit. It has a switch at some or all intersections, much like a multiplexed display. Almost all keyboards have only the switch at each intersection, which causes "ghost keys" and "key jamming" when multiple keys are pressed (see rollover). Certain, often more expensive keyboards have a diode between each intersection, allowing the keyboard microcontroller to accurately sense any number of simultaneous keys being pressed, without generating erroneous ghost keys..
Wikimedia Foundation. 2010.
Look at other dictionaries:
Keyboard — may refer to:In typing: * Alphanumeric keyboard * Keyboard (computing), a set of alphanumeric and command keys used to input information to a computer:* IBM PC keyboard:* Apple Keyboard:* Chorded keyboard, on which several keys are pressed… … Wikipedia
Keyboard (computing) — In computing, a keyboard is an input device partially modelled after the typewriter keyboard which uses an arrangement of buttons, or keys which act as electronic switches. A keyboard typically has characters engraved or printed on the keys, and… … Wikipedia
Keyboard layout — QWERTY keyboard on a laptop. A keyboard layout is any specific mechanical, visual, or functional arrangement of the keys, legends, or key–meaning associations (respectively) of a computer, typewriter, or other typographic keyboard. Mechanical… … Wikipedia
keyboard instrument — ▪ music Introduction any musical instrument on which different notes can be sounded by pressing a series of keys, push buttons, or parallel levers. In nearly all cases in Western music the keys correspond to consecutive notes in the… … Universalium
Computer keyboard — A key being pressed on a computer keyboard. In computing, a keyboard is a typewriter style keyboard, which uses an arrangement of buttons or keys, to act as mechanical levers or electronic switches. Following the decline of punch cards and paper… … Wikipedia
Electronic keyboard — An electronic keyboard. An electronic keyboard (also called digital keyboard, portable keyboard and home keyboard) is an electronic or digital keyboard instrument. The major components of a typical modern electronic keyboard are: Musical keyboard … Wikipedia
Chiclet keyboard — Rubber chiclet calculator keyboard Keyboard from a … Wikipedia
Scissor-switch technology (keyboard terminology) — Scissor switch technology is a type of computer keyboard, mainly used in laptops.Scissor switch technology does not use a rubber plunger assembly like most other keyboards. Scissor switch keyboards are normally responsive and crisp. These… … Wikipedia
Membrane keyboard — as used on the East German Robotron Z1013. A membrane keyboard is a computer keyboard whose keys are not separate, moving parts, as with the majority of other keyboards, but rather are pressure pads that have only outlines and symbols printed on… … Wikipedia
Topic outline of technology — Technology refers to all tools and procedures. It is the state of knowledge and development at any given time on controlling our surroundings, and includes all tools (utensils, devices, machinery, inventions, and structures), all methods (skills … Wikipedia