Response spectrum

Response spectrum

A response spectrum is simply a plot of the peak or steady-state response (displacement, velocity or acceleration) of a series of oscillators of varying natural frequency, that are forced into motion by the same base vibration or shock. The resulting plot can then be used to pick off the response of any linear system, given its natural frequency of oscillation. One such use is in assessing the peak response of buildings to earthquakes. The science of strong ground motion may use some values from the ground response spectrum (calculated from recordings of surface ground motion from seismographs) for correlation with seismic damage.

If the input used in calculating a response spectrum is steady-state periodic, then the steady-state result is recorded. Damping must be present, or else the response will be infinite. For transient input (such as seismic ground motion), the peak response is reported. Some level of damping is generally assumed, but a value will be obtained even with no damping.

Response spectra can also be used in assessing the response of linear systems with multiple modes of oscillation (multi-degree of freedom systems), although they are only accurate for low levels of damping. Modal analysis is performed to identify the modes, and the response in that mode can be picked from the response spectrum. This peak response is then combined to estimate a total response. A typical combination method is the square root of the sum of the squares (SRSS) if the modal frequencies are not close. The result is typically different from that which would be calculated directly from an input, since phase information is lost in the process of generating the response spectrum.

The main limitation of response spectra is that they are only universally applicable for linear systems. Response spectra can be generated for non-linear systems, but are only applicable to systems with the same non-linearity, although attempts have been made to develop non-linear seismic design spectra with wider structural application. It should be noted that the results cannot be directly combined for multi-mode response.

Seismic Response Spectra

Response spectra are very useful tools for analyzing the performance of structures and equipment in earthquakes, since many behave principally as simple oscillators (also known as single degree of freedom systems. Thus, if you can find out the natural frequency of the structure, then the peak response of the building can be estimated by reading the value from the ground response spectrum for the appropriate frequency. In most building codes in seismic regions, this value forms the basis for calculating the forces that a structure must be designed to resist (seismic analysis).

As mentioned earlier, the ground response spectrum is the response plot done at the free surface of the earth. Significant seismic damage may occur if the building response is 'in tune' with components of the ground motion (resonance), which may be identified from the response spectrum. This was observed in the 1985 Mexico City Earthquake [http://neic.usgs.gov/neis/eq_depot/world/1985_09_19.html] where the oscillation of the deep-soil lake bed was similar to the natural frequency of mid-rise concrete buildings, causing significant damage. Shorter (stiffer) and taller (more flexible) buildings suffered less damage.

In 1941 at Caltech, George Housner began to publish calculations of response spectra from accelerographsref|Housner. In the 1982 EERI Monograph on "Earthquake Design and Spectra"ref|Newmark, Newmark and Hall describe how they developed an "idealized" seismic response spectrum based on a range of response spectra generated for available earthquake records. This was then further developed into a design response spectrum for use in structural design, and this basic form (with some modifications) is now the basis for structural design in seismic regions throughout the world (typically plotted against structural "period", the inverse of frequency). A nominal level of damping is assumed (5% of critical damping).

For "regular" low-rise buildings, the structural response to earthquakes is characterized by the fundamental mode (a "waving" back-and-forth), and most building codes permit design forces to be calculated from the design spectrum on the basis of that frequency, but for more complex structures, combination of the results for many modes (calculated through modal analysis) is often required. In extreme cases, where structures are either too irregular, too tall or of significance to a community in disaster response, the response spectrum approach is no longer appropriate, and more complex analysis is required, such as non-linear static or dynamic analysis.

References

# [http://neic.usgs.gov/neis/eq_depot/world/1985_09_19.html Report on 1985 Mexico City Earthquake] from "EQ Facts & Lists: Large Historical Earthquakes", USGS.
# [http://www.curee.org/image_gallery/calendar/essays/1998-CUREE_excerpt.pdf "Historic Developments in the Evolution of Earthquake Engineering"] , illustrated essays by Robert Reitherman, CUREE, 1997, p10.
#Newmark, N. M., and Hall, W. J. 1982. “Earthquake Spectra and Design,” Engineering Monographs on Earthquake Criteria, Structural Design, and Strong Motion Records, Vol 3, [http://www.eeri.org/ Earthquake Engineering Research Institute] , Oakland, CA.

External links

* [http://www.usace.army.mil/inet/usace-docs/eng-manuals/em1110-2-6050/a-b.pdf "Illustration of Newmark-Hall Approach to Developing Design Response Spectra"] - Appendix B of "Engineering and Design - Response Spectra and Seismic Analysis for Concrete Hydraulic Structures (EM 1110-2-6050)", US Army Corps of Engineers


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Shock response spectrum — A Shock Response Spectrum (SRS) [ [http://acronyms.thefreedictionary.com/Shock+response+spectrum Acronym] Acronym] is a graphical representation of an arbitrary transient acceleration input, such as shock in terms of how a Single Degree Of… …   Wikipedia

  • Response factor — Response factor, usually in chromatography and spectroscopy, is the ratio between a signal produced by an analyte, and the quantity of analyte which produces the signal. Ideally, and for easy computation, this ratio is unity (one). In real world… …   Wikipedia

  • Spectrum analyzer — A spectrum analyzer Spectrum analyzer display A spectrum analyzer measures the magnitude of an input signal versus frequency with …   Wikipedia

  • Spectrum Safari — Infobox VG| title = Spectrum Safari developer = A.J. Rushton publisher = CDS Micro Systems released = 1983 genre=Arcade , Maze platforms = ZX Spectrum requirements = 48K RAM media = Cassette Spectrum Safari is a ZX Spectrum video game developed… …   Wikipedia

  • Spectrum Sports, Inc. v. McQuillan — Infobox SCOTUS case Litigants=Spectrum Sports, Inc. v. McQuillan ArgueDate=November 10 ArgueYear=1992 DecideDate=January 25 DecideYear=1993 FullName=Spectrum Sports, Inc., et al., Petitioners v. Shirley McQuillan, et vir, DBA Sorboturf… …   Wikipedia

  • Visible spectrum — White light is dispersed by a prism into the colors of the optical spectrum. The visible spectrum is the portion of the electromagnetic spectrum that is visible to (can be detected by) the human eye …   Wikipedia

  • Affective spectrum — The affective spectrum is a grouping of related psychiatric and medical disorders which may accompany bipolar, unipolar, and schizoaffective disorders at statistically higher rates than would normally be expected. These disorders are identified… …   Wikipedia

  • Obsessive–compulsive spectrum — The obsessive–compulsive spectrum is a model of medical classification where various psychiatric, neurological and/or medical conditions are described as existing on a spectrum of conditions related to obsessive–compulsive disorder (OCD).[1] The… …   Wikipedia

  • Frequency response — is the measure of any system s spectrum response at the output to a signal of varying frequency (but constant amplitude) at its input. In the audible range it is usually referred to in connection with electronic amplifiers, microphones and… …   Wikipedia

  • Conditions comorbid to autism spectrum disorders — There are many conditions comorbid to autism spectrum disorders, such as fragile X syndrome and epilepsy. In medicine and in psychiatry, comorbidity describes the effect of other diseases an individual patient might have other than the primary… …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.