Polymerase chain reaction optimization


Polymerase chain reaction optimization

The polymerase chain reaction (PCR) is a commonly used molecular biology tool for amplifying DNA, and various techniques for PCR optimization have been developed by molecular biologists to improve PCR performance and minimize failure.

Contents

Contamination and PCR

The PCR method is extremely sensitive, requiring only a few DNA molecules in a single reaction for amplification across several orders of magnitude. Therefore, adequate measures to avoid contamination from any DNA present in the lab environment (bacteria, viruses, or human sources) are required. Because products from previous PCR amplifications are a common source of contamination, many molecular biology labs have implemented procedures that involve dividing the lab into separate areas.[1] One lab area is dedicated to preparation and handling of pre-PCR reagents and the setup of the PCR reaction, and another area to post-PCR processing, such as gel electrophoresis or PCR product purification. For the setup of PCR reactions, many standard operating procedures involve using pipettes with filter tips and wearing fresh laboratory gloves, and in some cases a laminar flow cabinet with UV lamp as a work station (to destroy any extraneomultimer formation). It is routinely assessed with a (negative) control PCR reaction. This control reaction is set up in the same way as the experimental PCRs, but without template DNA added, and is performed alongside the experimental PCRs.

Hairpins

Secondary structures in the DNA can result in folding or knotting of DNA template or primers, leading to decreased product yield or failure of the reaction. Hairpins, which consist of internal folds caused by base-pairing between nucleotides in inverted repeats within single-stranded DNA, are common secondary structures and may result in failed PCRs.

Typically, primer design that includes a check for potential secondary structures in the primers, or addition of DMSO or glycerol to the PCR to minimize secondary structures in the DNA template[citation needed], are used in the optimization of PCRs that have a history of failure due to suspected DNA hairpins. http://www.promega.com/pnotes/65/6921_27/6921_27_core.pdf

Polymerase errors

Taq polymerase lacks a 3' to 5' exonuclease activity. Thus, Taq has no error-proof-reading activity, which consists of excision of any newly misincorporated nucleotide base from the nascent (=extending) DNA strand that does not match with its opposite base in the complementary DNA strand. The lack in 3' to 5' proofreading of the Taq enzyme results in a high error rate (mutations per nucleotide per cycle) of approximately 1 in 10,000 bases, which affects the fidelity of the PCR, especially if errors occur early in the PCR with low amounts of starting material, causing accumulation of a large proportion of amplified DNA with incorrect sequence in the final product.[2]

Several "high-fidelity" DNA polymerases, having engineered 3' to 5' exonuclease activity, have become available that permit more accurate amplification for use in PCRs for sequencing or cloning of products. Examples of polymerases with 3' to 5' exonuclease activity include: KOD DNA polymerase, a recombinant form of Thermococcus kodakaraensis KOD1; Vent, which is extracted from Thermococcus litoralis; Pfu DNA polymerase, which is extracted from Pyrococcus furiosus; and Pwo, which is extracted from Pyrococcus woesii.[citation needed]

Magnesium concentration

Magnesium is required as a co-factor for thermostable DNA polymerase. Taq polymerase is a magnesium-dependent enzyme and determining the optimum concentration to use is critical to the success of the PCR reaction.[3] Some of the components of the reaction mixture such as template concentration, dNTPs and the presence of chelating agents (EDTA) or proteins can reduce the amount of free magnesium present thus reducing the activity of the enzyme.[4] Primers which bind to incorrect template sites are stabilized in the presence of excessive magnesium concentrations and so results in decreased specificity of the reaction. Excessive magnesium concentrations also stabilize double stranded DNA and prevent complete denaturation of the DNA during PCR reducing the product yield.[3][4] Inadequate thawing of MgCl2 may result in the formation of concentration gradients within the magnesium chloride solution supplied with the DNA polymerase and also contribute to many failed experiments.[4]

Size and other limitations

PCR works readily with a DNA template of up to two to three thousand base pairs in length. However, above this size, product yields often decrease, as with increasing length stochastic effects such as premature termination by the polymerase begin to affect the efficiency of the PCR. It is possible to amplify larger pieces of up to 50,000 base pairs with a slower heating cycle and special polymerases. These are polymerases fused to a processivity-enhancing DNA-binding protein, enhancing adherence of the polymerase to the DNA [5][6].

Other valuable properties of the chimeric polymerases TopoTaq and PfuC2 include enhanced thermostability, specificity and resistance to contaminants and inhibitors[7][8]. They were engineered using the unique helix-hairpin-helix (HhH) DNA binding domains of topoisomerase V[9] from hyperthermophile Methanopyrus kandleri. Chimeric polymerases overcome many limitations of native enzymes and are used in direct PCR amplification from cell cultures and even food samples, thus by-passing laborious DNA isolation steps. A robust strand-displacement activity of the hybrid TopoTaq polymerase helps solving PCR problems with hairpins and G-loaded double helices, because helices with a high G-C context possess a higher melting temperature [10].

Non-specific priming

Non-specific binding of primers frequently occurs and can be due to repeat sequences in the DNA template, non-specific binding between primer and template, and incomplete primer binding, leaving the 5' end of the primer unattached to the template. Non-specific binding is also often increased when degenerate primers are used in the PCR. Manipulation of annealing temperature and magnesium ion (which stabilise DNA and RNA interactions) concentrations can increase specificity. Non-specific priming during reaction preparation at lower temperatures can be prevented by using "hot-start" polymerase enzymes whose active site is blocked by an antibody or chemical that only dislodges once the reaction is heated to 95˚C during the denaturation step of the first cycle.

Other methods to increase specificity include Nested PCR and Touchdown PCR.

Touchdown polymerase chain reaction or touchdown style polymerase chain reaction is a method of polymerase chain reaction by which primers will avoid amplifying nonspecific sequences. The annealing temperature during a polymerase chain reaction determines the specificity of primer annealing. The melting point of the primer sets the upper limit on annealing temperature. At temperatures just below this point, only very specific base pairing between the primer and the template will occur. At lower temperatures, the primers bind less specifically. Nonspecific primer binding obscures polymerase chain reaction results, as the nonspecific sequences to which primers anneal in early steps of amplification will "swamp out" any specific sequences because of the exponential nature of polymerase amplification.

The earliest steps of a touchdown polymerase chain reaction cycle have high annealing temperatures. The annealing temperature is decreased in increments for every subsequent set of cycles (the number of individual cycles and increments of temperature decrease is chosen by the experimenter). The primer will anneal at the highest temperature which is least-permissive of nonspecific binding that it is able to tolerate. Thus, the first sequence amplified is the one between the regions of greatest primer specificity; it is most likely that this is the sequence of interest. These fragments will be further amplified during subsequent rounds at lower temperatures, and will out compete the nonspecific sequences to which the primers may bind at those lower temperatures. If the primer initially (during the higher-temperature phases) binds to the sequence of interest, subsequent rounds of polymerase chain reaction can be performed upon the product to further amplify those fragments.

Primer dimers

Annealing of the 3' end of one primer to itself or the second primer may cause primer extension, resulting in the formation of so-called primer dimers, visible as low-molecular-weight bands on PCR gels.[11] Primer dimer formation often competes with formation of the DNA fragment of interest, and may be avoided using primers that are designed such that they lack complementarity—especially at the 3' ends—to itself or the other primer used in the reaction. If primer design is constraint by other factors and if primer-dimers do occur, methods to limit their formation may include optimisation of the MgCl2 concentration or increasing the annealing temperature in the PCR.[11]

Deoxynucleotides

Deoxynucleotides (dNTPs) may bind Mg2+ ions and thus affect the concentration of free magnesium ions in the reaction. In addition, excessive amounts of dNTPs can increase the error rate of DNA polymerase and even inhibit the reaction.[3][4] An imbalance in the proportion of the four dNTPs can result in misincorporation into the newly formed DNA strand and contribute to a decrease in the fidelity of DNA polymerase.[12]

References

  1. ^ Balin BJ, Gérard HC, Arking EJ, et al. (1998). "Identification and localization of Chlamydia pneumoniae in the Alzheimer's brain". Med. Microbiol. Immunol. 187 (1): 23–42. doi:10.1007/s004300050071. PMID 9749980. 
  2. ^ Eckert KA, Kunkel TA (August 1991). "DNA polymerase fidelity and the polymerase chain reaction". PCR Methods Appl. 1 (1): 17–24. PMID 1842916. http://www.genome.org/cgi/pmidlookup?view=long&pmid=1842916. 
  3. ^ a b c Markoulatos P, Siafakas N, Moncany M (2002). "Multiplex polymerase chain reaction: a practical approach". J. Clin. Lab. Anal. 16 (1): 47–51. doi:10.1002/jcla.2058. PMID 11835531. 
  4. ^ a b c d Nucleic acid amplification protocols and guidelines. http://www.promega.com/paguide/chap1.htm. 
  5. ^ Pavlov AR, Belova GI, Kozyavkin SA, Slesarev AI (2002). "Helix-hairpin-helix motifs confer salt resistance and processivity on chimeric DNA polymerases". Proc Natl Acad Sci. 99 (21): 3510–13515. doi:10.1073/pnas.202127199. PMC 129704. PMID 12368475. http://www.pubmedcentral.nih.gov/articlerender.fcgi?tool=pmcentrez&artid=129704. 
  6. ^ Demidov VV (2002). "A happy marriage: advancing DNA polymerases with DNA topoisomerase supplements". Trends Biotechnol. 20 (12): 491. doi:10.1016/S0167-7799(02)02101-7. 
  7. ^ Pavlov AR, Pavlova NV, Kozyavkin SA, Slesarev AI (2004). "Recent developments in the optimization of thermostable DNA polymerases for efficient applications". Trends Biotechnol. 22 (5): 253–260. doi:10.1016/j.tibtech.2004.02.011. PMID 15109812. 
  8. ^ Pavlov AR, Pavlova NV, Kozyavkin SA, Slesarev AI (2004). "Thermostable Chimeric DNA Polymerases with High Resistance to Inhibitors". DNA Amplification: Current Technologies and Applications. Horizon Bioscience. pp. 3–20. ISBN 0-9545232-9-6. http://www.horizonpress.com/hsp/abs/absdna.html. 
  9. ^ Forterre P (2006). "DNA topoisomerase V: a new fold of mysterious origin". Trends Biotechnol. 24 (6): 245–247. doi:10.1016/j.tibtech.2006.04.006. PMID 16650908. 
  10. ^ Pavlov AR, Pavlova NV, Kozyavkin SA, Slesarev AI (2006). "Thermostable DNA Polymerases for a Wide Spectrum of Applications: Comparison of a Robust Hybrid TopoTaq to other enzymes". In Kieleczawa J. DNA Sequencing II: Optimizing Preparation and Cleanup. Jones and Bartlett. pp. 241–257. ISBN 0-7637338-3-0. http://bioscience.jbpub.com/catalog/0763733830/table_of_contents.htm. 
  11. ^ a b Kramer MF, Coen DM (August 2006). "Enzymatic amplification of DNA by PCR: standard procedures and optimization". Curr Protoc Cytom Appendix 3: Appendix 3K. doi:10.1002/0471142956.cya03ks37. PMID 18770830. 
  12. ^ Kunz BA, Kohalmi SE (1991). "Modulation of mutagenesis by deoxyribonucleotide levels". Annu. Rev. Genet. 25: 339–59. doi:10.1146/annurev.ge.25.120191.002011. PMID 1812810. 

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Polymerase chain reaction — PCR redirects here. For other uses, see PCR (disambiguation). A strip of eight PCR tubes, each containing a 100 μl reaction mixture The polymerase chain reaction (PCR) is a scientific technique in molecular biology to amplify a single or a… …   Wikipedia

  • Variants of PCR — This page assumes familiarity with the terms and components used in the Polymerase Chain Reaction (PCR) process. The versatility of PCR has led to a large number of variants: Contents 1 Basic modifications 2 Pretreatments and extensions 3 Other… …   Wikipedia

  • Molecular Inversion Probe — (MIP)[1] belongs to the class of Capture by Circularization molecular techniques [1] for performing genomic partitioning, a process through which one captures and enriches specific regions of the genome[2]. Probes used in this technique are… …   Wikipedia

  • Chemical biology — is a scientific discipline spanning the fields of chemistry and biology that involves the application of chemical techniques and tools, often compounds produced through synthetic chemistry, to the study and manipulation of biological systems.… …   Wikipedia

  • PCR en tiempo real — PCR cuantitativa, qPCR, Q PCR (del inglés quantitative polymerase chain reaction) o PCR en tiempo real (del inglés real time PCR) es una variante de la reacción en cadena de la polimerasa (PCR) utilizada para amplificar y simultáneamente… …   Wikipedia Español

  • Nucleic acid thermodynamics — is the study of the thermodynamics of nucleic acid molecules, or how temperature affects nucleic acid structure. For multiple copies of DNA molecules, the melting temperature (Tm) is defined as the temperature at which half of the DNA strands are …   Wikipedia

  • OLIGO Primer Analysis Software — Developer(s) Molecular Biology Insights, Inc. Stable release 7.54 / March 23, 2011 Operating system Windows, Macintosh Platform Mac, PC …   Wikipedia

  • Natural computing — For the scientific journal, see Natural Computing (journal). Natural computing, also called Natural computation, is a terminology introduced to encompass three classes of methods: 1) those that take inspiration from nature for the development of… …   Wikipedia

  • DNA-encoded chemical library — DNA encoded chemical libraries (DEL) are a new technology for the synthesis and screening of collections of chemical compounds of unprecedented size and quality. DEL represents an advance in medicinal chemistry which bridges the fields of… …   Wikipedia

  • Mohamed Ghonim — Ghonim, Mohammed A محمد غنيم Born 17th March, 1939 Mansoura, Egypt Nationality Egyptian Fields …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.