Sound synthesis


Sound synthesis

Basics of sound

When any mechanical collision occurs, such as a fork being dropped, sound is produced. The energy from the collision is transferred through the air and other mediums, and if heard, into your ears. On a small scale, the collision creates sine waves. When different sine waves with variations are added, or are existing in the same place at the same time, they produce more complex waves with a sine function derivation. The environment the collision is produced in modulates, or changes, the wave or "sound". The basic idea behind sound synthesis is to produce a sound wave with a machine that would have been naturally produced by a collision, and then manipulate it like the environment does.

Generally, a single "sound" will include a fundamental frequency, and any number of overtones. The frequencies of these overtones are either integer multiples of the fundamental frequency, or integer fractions thereof (subharmonics). This study of how complex waveforms can be alternately represented is covered in Laplace and Fourier transforms.

When natural tonal instruments' sounds are analyzed in the frequency domain (as on a spectrum analyzer), the spectra of their sounds will exhibit amplitude spikes at each of the fundamental tone's harmonics. Some harmonics may have higher amplitudes than others. The specific set of harmonic-vs-amplitude pairs is known as a sound's harmonic content.

When analyzed in the time domain, a sound does not necessarily have the same harmonic content throughout the duration of the sound. Typically, high-frequency harmonics will die out more quickly than the lower harmonics. For a synthesized sound to "sound" right, it requires accurate reproduction of the original sound in both the frequency domain and the time domain.

Percussion instruments and rasps have very low harmonic content, and exhibit spectra that are comprised mainly of noise shaped by the resonant frequencies of the structures that produce the sounds. However, the resonant properties of the instruments (the spectral peaks of which are also referred to as formants) also shape an instrument's spectrum (esp. in string, wind, voice and other natural instruments).

In most conventional synthesizers, for purposes of re-synthesis, recordings of real instruments are composed of several components.

These component sounds represent the acoustic responses of different parts of the instrument, the sounds produced by the instrument during different parts of a performance, or the behavior of the instrument under different playing conditions (pitch, intensity of playing, fingering, etc.) The distinctive timbre, intonation and attack of a real instrument can therefore be created by mixing together these components in such a way as resembles the natural behavior of the real instrument. Nomenclature varies by synthesizer methodology and manufacturer, but the components are often referred to as oscillators or partials. A higher fidelity reproduction of a natural instrument can typically be achieved using more oscillators, but increased computational power and human programming is required, and most synthesizers use between one and four oscillators by default.

One of the most important parts of any sound is its amplitude envelope. This envelope determines whether the sound is percussive, like a snare drum, or persistent, like a violin string. Most often, this shaping of the sound's amplitude profile is realized with an "ADSR" (Attack Decay Sustain Release) envelope model applied to control oscillator volumes. Apart from Sustain, each of these stages is modeled by a change in volume (typically exponential).

Although the oscillations in real instruments also change frequency, most instruments can be modeled well without this refinement. This refinement is necessary to generate a vibrato.

Attack time

is the time taken for initial run-up of the sound level from nil (or blank sustainment) to 100% or what ever designated percentage.

Decay time

is the time taken for the subsequent run down from the attack level to the designated Sustain level.

ustain level

is the steady volume produced when a key is held down.

Release time

is the time taken for the sound to decay from the Sustain level to nil when the key is released. If a key is released during the Attack or Decay stage, the Sustain phase is usually skipped. Similarly, a Sustain level of zero will produce a more-or-less piano-like (or percussive) envelope, with no continuous steady level, even when a key is held. Exponential rates are commonly used because they closely model real physical vibrations, which usually rise or decay exponentially.

Overview of popular synthesis methods

Subtractive synthesizers use a simple acoustic model that assumes an instrument can be approximated by a simple signal generator (producing sawtooth waves, square waves, etc...) followed by a filter which represents the frequency-dependent losses and resonances in the instrument body. For reasons of simplicity and economy, these filters are typically low-order lowpass filters. The combination of simple modulation routings (such as pulse width modulation and oscillator sync), along with the physically unrealistic lowpass filters, is responsible for the "classic synthesizer" sound commonly associated with "analog synthesis" and often mistakenly used when referring to software synthesizers using subtractive synthesis. Although physical modeling synthesis, synthesis wherein the sound is generated according to the physics of the instrument, has superseded subtractive synthesis for accurately reproducing natural instrument timbres, the subtractive synthesis paradigm is still ubiquitous in synthesizers with most modern designs still offering low-order lowpass or bandpass filters following the oscillator stage.

One of the newest systems to evolve inside music synthesis is physical modeling. This involves taking up models of components of musical objects andcreating systems which define action, filters, envelopes and otherparameters over time. The definition of such instruments is virtuallylimitless, as one can combine any given models available with any amountof sources of modulation in terms of pitch, frequency and contour. Forexample, the model of a violin with characteristics of a pedal steelguitar and perhaps the action of piano hammer ... physical modelingon computers gets better and faster with higher processing.

One of the easiest synthesis systems is to record a real instrument as a digitized waveform, and then play back its recordings at different speeds to produce different tones. This is the technique used in "sampling". Most samplers designate a part of the sample for each component of the ADSR envelope, and then repeat that section while changing the volume for that segment of the envelope. This lets the sampler have a persuasively different envelope using the same note..

ynthesizer basics

There are three major kinds of synthesizers, analog, digital and software. In addition there are synthesizers that rely upon combinations of those three kinds, known as hybrid synthesizers.

There are also many different kinds of synthesis methods, each applicable to both analog and digital synthesizers. These techniques tend to be mathematically related, especially frequency modulation and phase modulation.

* Subtractive synthesis
* Additive synthesis
* Granular synthesis
* Wavetable synthesis
* Frequency modulation synthesis
* Phase distortion synthesis
* Physical modeling synthesis
* Sample-based synthesis
* Subharmonic synthesis


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Local sound synthesis — is the concept underlying the audio processing tool Melodyne. Peter Neubäcker, creator of the program, first thought of the idea philosophically, with the desire to free sound from time. The question was posed symbolically What does a stone sound …   Wikipedia

  • Sound card — A Sound Blaster Live! Value card, a typical (circa 2000) PCI sound card. Connects to Motherboard via one of: PCI ISA USB IEEE 139 …   Wikipedia

  • Synthesis — The term synthesis (from the ancient Greek Polytonic|σύνθεσις σύν with and θέσις placing ) is used in many fields, usually to mean a process which combines together two or more pre existing elements resulting in the formation of something new.… …   Wikipedia

  • Sound design — ambox type = content text = This {1|article or section} may be inaccurate or in favor of certain viewpoints. Please [SERVERlocalurl:PAGENAME|action=edit improve the article] by adding information on neglected viewpoints, or discuss the issue on… …   Wikipedia

  • Sound effect — For the album by The Jam, see Sound Affects. Sound effects or audio effects are artificially created or enhanced sounds, or sound processes used to emphasize artistic or other content of films, television shows, live performance, animation, video …   Wikipedia

  • Sound Blaster AWE32 — is an ISA sound card from Creative Technology. It is an add on board for PCs. The AWE32, introduced in March 1994, was a nearly full length ISA card, measuring 14 inches (356 mm) in length. It needed to be this large because of the number of… …   Wikipedia

  • Sound Blaster X-Fi — XtremeGamer Fatal1ty Pro Sound Blaster X Fi is a lineup of sound cards in Creative Labs Sound Blaster series. Contents 1 …   Wikipedia

  • Sound Blaster AWE64 — is an ISA sound card from Creative Technology. It is an add on board for PCs. The card was launched in November 1996.OverviewThe Sound Blaster AWE64 is significantly smaller than its predecessor, the Sound Blaster AWE32. It offers a similar… …   Wikipedia

  • Sound localization — refers to a listener s ability to identify the location or origin of a detected sound in direction and distance. It may also refer to the methods in acoustical engineering to simulate the placement of an auditory cue in a virtual 3D space (see… …   Wikipedia

  • Sound Blaster Audigy — is a sound card series from Creative Technology. It is a PCI add on board for PCs.The Sound Blaster Audigy featured the Audigy processor (EMU10K2), an improved version of the EMU10K1 processor that shipped with the Sound Blaster Live!.First… …   Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.