- Contact lens
A contact lens, or simply contact, is a lens placed on the eye. They are considered medical devices and can be worn to correct vision, for cosmetic or therapeutic reasons. In 2004, it was estimated that 125 million people (2%) use contact lenses worldwide, including 28 to 38 million in the United States. In 2010, worldwide contact lens market was estimated at $6.1 billion, while the U.S. soft lens market is estimated at $2.1 billion.  Some have estimated that the global market will reach $11.7 billion by 2015.  As of 2010, the average age of contact lens wearers globally was 31 years old and two thirds of wearers were female. 
People choose to wear contact lenses for many reasons. Aesthetics and cosmetics are often motivating factors for people that would like to avoid wearing glasses or would like to change the appearance of their eyes.  Other people wear contacts for more visual reasons. When compared with spectacles, contact lenses typically provide better peripheral vision, and do not collect moisture such as rain, snow, condensation, or sweat. This makes them ideal for sports and other outdoor activities. Additionally, there are conditions such as keratoconus and aniseikonia that are corrected better by contacts than by glasses.
- 1 History
- 2 Types of contact lenses
- 3 Manufacturing of contact lenses
- 4 Contact lens prescriptions
- 5 Complications
- 6 Usage
- 7 Current research
- 8 See also
- 9 References
- 10 Further reading
- 11 External links
Leonardo Da Vinci is frequently credited with introducing the idea of contact lenses in his 1508 Codex of the eye, Manual D, where he described a method of directly altering corneal power by submerging the eye in a bowl of water. Leonardo, however, did not suggest his idea be used for correcting vision—he was more interested in learning about the mechanisms of accommodation of the eye.
René Descartes proposed another idea in 1636, in which a glass tube filled with liquid is placed in direct contact with the cornea. The protruding end was to be composed of clear glass, shaped to correct vision; however, the idea was impracticable, since it would make blinking impossible.
In 1801, Thomas Young, made a basic pair of contact lenses on the model of Descartes. He used wax to affix water-filled lenses to his eyes. This neutralized his own refractive power. He then corrected for it with another pair of lenses.
However, like Leonardo's, Young's device was not intended to correct refraction errors. Sir John Herschel, in a footnote of the 1845 edition of the Encyclopedia Metropolitana, posed two ideas for the visual correction: the first "a spherical capsule of glass filled with animal jelly", and "a mould of the cornea" which could be impressed on "some sort of transparent medium". Though Herschel reportedly never tested these ideas, they were both later advanced by several independent inventors such as Hungarian Dr. Dallos (1929), who perfected a method of making molds from living eyes. This enabled the manufacture of lenses that, for the first time, conformed to the actual shape of the eye.
It was not until 1887 that a German glassblower, F.E. Muller, produced the first eye covering to be seen through and tolerated. In 1887, the German ophthalmologist Adolf Gaston Eugen Fick constructed and fitted the first successful contact lens. While working in Zürich, he described fabricating afocal scleral contact shells, which rested on the less sensitive rim of tissue around the cornea, and experimentally fitting them: initially on rabbits, then on himself, and lastly on a small group of volunteers. These lenses were made from heavy blown glass and were 18–21mm in diameter. Fick filled the empty space between cornea/callosity and glass with a dextrose solution. He published his work, "Contactbrille", in the journal Archiv für Augenheilkunde in March 1888.
Fick's lens was large, unwieldy, and could only be worn for a couple of hours at a time. August Müller in Kiel, Germany, corrected his own severe myopia with a more convenient glass-blown scleral contact lens of his own manufacture in 1888.
Also in 1887, Louis J. Girard invented a similar scleral form of contact lens. Glass-blown scleral lenses remained the only form of contact lens until the 1930s when polymethyl methacrylate (PMMA or Perspex/Plexiglas) was developed, allowing plastic scleral lenses to be manufactured for the first time. In 1936, optometrist William Feinbloom introduced plastic lenses, making them lighter and more convenient. These lenses were a combination of glass and plastic.
In 1949, the first "corneal" lenses were developed. These were much smaller than the original scleral lenses, as they sat only on the cornea rather than across all of the visible ocular surface, and could be worn up to sixteen hours per day. PMMA corneal lenses became the first contact lenses to have mass appeal through the 1960s, as lens designs became more sophisticated with improving manufacturing (lathe) technology.
Early corneal lenses in the 1950s and 1960s were relatively expensive and fragile, resulting in the development of a market for contact lens insurance. Replacement Lens Insurance, Inc. (now known as RLI Corp.) phased out its original flagship product in 1994 after contacts became more affordable and easier to replace.
One important disadvantage of PMMA lenses is that no oxygen is transmitted through the lens to the conjunctiva and cornea, which can cause a number of adverse clinical effects. By the end of the 1970s, and through the 1980s and 1990s, a range of oxygen-permeable but rigid materials were developed to overcome this problem. Chemist Norman Gaylord played a prominent role in the development of these newer, permeable contact lenses. Collectively, these polymers are referred to as "rigid gas permeable" or "RGP" materials or lenses. Although all the above lens types—sclerals, PMMA lenses and RGPs—could be correctly referred to as being "hard" or "rigid", the term hard is now used to refer to the original PMMA lenses which are still occasionally fitted and worn, whereas rigid is a generic term which can be used for all these lens types. That is, hard lenses (PMMA lenses) are a sub-set of rigid lenses. Occasionally, the term "gas permeable" is used to describe RGP lenses, but this is potentially misleading, as soft lenses are also gas permeable in that they allow oxygen to move through the lens to the ocular surface.
The principal breakthrough in soft lenses was made by the Czech chemists Otto Wichterle and Drahoslav Lim who published their work "Hydrophilic gels for biological use" in the journal Nature in 1959. This led to the launch of the first soft (hydrogel) lenses in some countries in the 1960s and the first approval of the "Soflens" material by the United States Food and Drug Administration (FDA) in 1971. These lenses were soon prescribed more often than rigid lenses, mainly due to the immediate comfort of soft lenses; by comparison, rigid lenses require a period of adaptation before full comfort is achieved. The polymers from which soft lenses are manufactured improved over the next 25 years, primarily in terms of increasing the oxygen permeability by varying the ingredients. In 1972, British optometrist Rishi Agarwal was the first to suggest disposable soft contact lenses.
In 1998, an important development was the launch of the first silicone hydrogels onto the market by CIBA VISION in Mexico. These new materials encapsulated the benefits of silicone—which has extremely high oxygen permeability—with the comfort and clinical performance of the conventional hydrogels which had been used for the previous 30 years. These lenses were initially advocated primarily for extended (overnight) wear although more recently, daily (no overnight) wear silicone hydrogels have been launched.
In a slightly modified molecule, a polar group is added without changing the structure of the silicone hydrogel. This is referred to as the Tanaka monomer because it was invented and patented by Kyoichi Tanaka of Menicon Co. of Japan in 1979. Second-generation silicone hydrogels, such as galyfilcon A (Acuvue Advance, Vistakon) and senofilcon A (Acuvue Oasys, Vistakon), use the Tanaka monomer. Vistakon improved the Tanaka monomer even further and added other molecules, which serve as an internal wetting agent.
Comfilcon A (Biofinity, CooperVision) was the first third-generation polymer. The patent claims that the material uses two siloxy macromers of different sizes that, when used in combination, produce very high oxygen permeability (for a given water content). Enfilcon A (Avaira, CooperVision) is another third-generation material that's naturally wettable. The enfilcon A material is 46% water.
Types of contact lenses
Corrective contact lenses
Corrective contact lenses are designed to improve vision. For many people, there is a mismatch between the refractive power of the eye and the length of the eye, leading to a refraction error. A contact lens neutralizes this mismatch and allows for correct focusing of light onto the retina. Conditions correctable with contact lenses include myopia (near or short sightedness), hypermetropia (far or long sightedness), astigmatism and presbyopia. Contact wearers must usually take their contact lenses out every night or every few days, depending on the brand and style of the contact. Recently, there has been renewed interest in orthokeratology, the correction of myopia by deliberate overnight flattening of the cornea, leaving the eye without contact lens or eyeglasses correction during the day.
For those with certain color deficiencies, a red-tinted "X-Chrom" contact lens may be used. Although the lens does not restore normal color vision, it allows some colorblind individuals to distinguish colors better.
ChromaGen lenses have been used and these have been shown to have some limitations with vision at night although otherwise producing significant improvements in color vision. An earlier study showed very significant improvements in color vision and patient satisfaction.
Later work that used these ChromaGen lenses with dyslexics in a randomised, double-blind, placebo controlled trial showed highly significant improvements in reading ability over reading without the lenses This system has been granted FDA approval in the USA.
Cosmetic contact lenses
A cosmetic contact lens is designed to change the appearance of the eye. These lenses may also correct the vision, but some blurring or obstruction of vision may occur as a result of the color or design. In the USA, the Food and Drug Administration frequently calls non-corrective cosmetic contact lenses decorative contact lenses. These types of lenses tend to cause mild irritation on insertion, but after accustoming to the lenses, the eyes are typically well tolerated. As with any contact lens, cosmetic lenses carry risks of mild and serious complications, including ocular redness, irritation, and infection. All individuals who decide to wear cosmetic lenses should check with an eye care provider prior to first use, and periodically over long term use in order to avoid potentially blinding complications.
Theatrical contact lenses are a type of cosmetic contact lens that are used primarily in the entertainment industry to make the eye appear confusing and arousing in appearance, most often in horror film and zombie movies, where lenses can make one's eyes appear demonic, cloudy and lifeless, or even to make the pupils of the wearer appear dilated to simulate the natural appearance of the pupils under the influence of various illicit drugs.
Scleral lenses cover the white part of the eye (i.e. sclera) and are used in many theatrical lenses. Due to their size, these lenses are difficult to insert and do not move very well within the eye. They may also hamper the vision as the lens has a small area for the user to see through. As a result they generally cannot be worn for more than 3 hours as they can cause temporary vision disturbances.
Similar lenses have more direct medical applications. For example, some lenses can give the iris an enlarged appearance, or mask defects such as absence of (aniridia) or damage to (dyscoria) the iris.
A new trend in Japan, South Korea and China is the circle contact lens. Circle lenses appear to be bigger because they are not only tinted in areas that cover the iris of the eye, but tinted prominently in the extra-wide outer ring of the lens. The result is the appearance of a bigger, wider iris.
Although many brands of contact lenses are lightly tinted to make them easier to handle, cosmetic lenses worn to change the color of the eye are far less common, accounting for only 3% of contact lens fits in 2004.
As a specialist's tool, in the hands of the untrained general public, non-prescription cosmetic contact lenses may represent a health risk.
Therapeutic contact lenses
Soft lenses are often used in the treatment and management of non-refractive disorders of the eye. A bandage contact lens protects an injured or diseased cornea from the constant rubbing of blinking eyelids thereby allowing it to heal. They are used in the treatment of conditions including bullous keratopathy, dry eyes, corneal ulcers and erosion, keratitis, corneal edema, descemetocele, corneal ectasis, Mooren's ulcer, anterior corneal dystrophy, and neurotrophic keratoconjunctivitis. Contact lenses that deliver drugs to the eye have also been developed.
The first contact lenses were made of glass, which caused eye irritation, and were not wearable for extended periods of time. But when William Feinbloom introduced lenses made from polymethyl methacrylate (PMMA or Perspex/Plexiglas), contact lenses became much more convenient. These PMMA lenses are commonly referred to as "hard" lenses (this term is not used for other types of contact lens).
PMMA lenses have certain disadvantages: no oxygen is transmitted through the lens to the cornea, which can cause a number of adverse clinical events. In the late 1970s, and through the 1980s and 1990s, improved rigid materials — which were also oxygen-permeable — were developed. Lenses made from these materials are called rigid gas permeable or 'RGP' lenses. RGP lenses are not hydrophilic and do not absorb vapours or liquids, making them suitable for use in some industrial environments.
An RGP lens is able to replace the natural shape of the cornea with a new refracting surface. This means that a regular (spherical) rigid contact lens can provide good level of vision in people who require strong correction, have astigmatism or suffer from diseases which distort the cornea, such as keratoconus.
While rigid lenses have been around for about 120 years, soft lenses are a much more recent development. The principal breakthrough in soft lenses made by Otto Wichterle led to the launch of the first soft (hydrogel) lenses in some countries in the 1960s and the approval of the 'Soflens' material (polymacon) by the United States FDA in 1971. Soft lenses are immediately comfortable, while rigid lenses require a period of adaptation before full comfort is achieved. The polymers from which soft lenses are manufactured improved over the next 25 years. The oxygen permeability has been increased by varying the polymer composition.
A small number of hybrid rigid/soft lenses exist. An alternative technique is piggybacking of contact lenses, a smaller, rigid lens being mounted atop a larger, soft lens. This is done in cases where a single lens will not provide the optical power, fitting characteristics, or comfort required.
In 1998, 'silicone hydrogels' became available. Silicone hydrogels have both the extremely high oxygen permeability of silicone and the comfort and clinical performance of the conventional hydrogels. These lenses were initially advocated primarily for extended (overnight) wear, although more recently daily (no overnight) wear silicone hydrogels have been approved and launched.
While it provides the oxygen permeability, the silicone also makes the lens surface highly hydrophobic and less "wettable." This frequently results in discomfort and dryness during lens wear. In order to compensate for the hydrophobicity, hydrogels are added (hence the name "silicone hydrogels") to make the lenses more hydrophilic. However the lens surface may still remain hydrophobic. Hence some of the lenses undergo surface modification processes by plasma treatments which alter the hydrophobic nature of the lens surface. Other lens types incorporate internal rewetting agents to make the lens surface hydrophilic. A third process uses longer backbone polymer chains that results in less cross linking and increased wetting without surface alterations or additive agents.
Wear Schedule/Wear Indicator
A daily wear (DW) contact lens is designed to be removed prior to sleeping. An extended wear (EW) contact lens is designed for continuous overnight wear, typically for 6 or more consecutive nights. Newer materials, such as silicone hydrogels, allow for even longer wear periods of up to 30 consecutive nights; these longer-wear lenses are often referred to as continuous wear (CW). Generally, extended wear lenses are discarded after the specified length of time, according to the replacement schedule (see next section). Extended- and continuous-wear contact lenses can be worn for such long periods of time because of their high oxygen permeability to the cornea (typically 5–6 times greater than conventional soft lenses), which allows the eye to remain healthy even when the eyelid is closed.
Extended lens wearers may have an increased risk for corneal infections and corneal ulcers, primarily due to poor care and cleaning of the lenses, tear film instability, and bacterial stagnation. Corneal neovascularization has historically also been a common complication of extended lens wear, though this does not appear to be a problem with silicone hydrogel extended wear. The most common complication of extended lens use is conjunctivitis, usually allergic or giant papillary conjunctivitis (GPC), sometimes associated with a poorly fitting contact lens.
The various soft contact lenses available are often categorized by their replacement schedule. The shortest replacement schedule is single use (1-day or daily disposable) lenses which are disposed of each night. Shorter replacement cycle lenses are commonly thinner and lighter, due to lower requirements for durability against wear and tear, and may be the most comfortable in their respective class and generation. These may be best for patients with ocular allergies or other conditions because it limits deposits of antigens and protein, and is considered the healthiest wear schedule due to the most frequent replacement. Single use lenses are also useful for people who use contacts infrequently, or for purposes (e.g. swimming or other sporting activities) where losing a lens is likely.
More commonly, contact lenses are prescribed to be disposed of on a two-week or 4-week basis. Quarterly or annual lenses, which used to be very common, have lost favor because a more frequent replacement allows for increased comfort and fewer on-lens deposits. Rigid gas permeable lenses are very durable and may last for several years without the need for replacement. PMMA hard lenses were very durable, and were commonly worn for 5 to 10 years. Interestingly, a careful analysis of the materials used to manufacture many 'daily' disposable lenses show that they are often manufactured from the same material as the longer life disposables (4-week replacement for example), from the same company. Although the materials are the same, the manufacturing processes by which the respective contact lenses are made is what differentiates a 'daily disposable' lens from a lens recommended for two-week or 4-week replacement.
Contrary to popular belief, replacement schedule is not determined by the Food & Drug Administration (FDA). Replacement schedule is recommended only by the manufacturer of that contact lens. The only FDA-approved measure of contact lens wear is the 'wear indication' or 'wear schedule' (extended wear or daily wear) as was discussed in the previous section.
A spherical contact lens is one in which both the inner and outer optical surfaces are portions of a sphere. A toric lens is one in which either or both of the optical surfaces have the effect of a cylindrical lens, usually in combination with the effect of a spherical lens. Myopic (nearsighted) and hypermetropic (farsighted) people who also have astigmatism and who have been told they are not suitable for regular contact lenses may be able to use toric lenses. If one eye has astigmatism and the other does not, the patient may be told to use a spherical lens in one eye and a toric lens in the other. Toric lenses are made from the same materials as regular contact lenses but have a few extra characteristics:
- They correct for both spherical and cylindrical aberration.
- They may have a specific 'top' and 'bottom', as they are not symmetrical around their centre and must not be rotated. Lenses must be designed to maintain their orientation regardless of eye movement. Often lenses are thicker at the bottom and this thicker zone is pushed down by the upper eyelid during blinking to allow the lens to rotate into the correct position (with this thicker zone at the 6 o'clock position on the eye). Toric lenses are usually marked with tiny striations to assist their fitting.
- They are usually more expensive to produce than non-toric lenses; therefore they are usually meant for extended wear. The first disposable toric lenses were introduced in 2000 by Vistakon.
Like eyeglasses, contact lenses can have one (single vision) or more (multifocal) focal points.
For correction of presbyopia or accommodative insufficiency multifocal contact lenses are almost always used; however, single vision lenses may also be used in a process known as monovision: single vision lenses are used to correct one eye's far vision and the other eye's near vision. Alternatively, a person may wear single vision contact lenses to improve distance vision and reading glasses to improve near vision.
Some contact lenses have small text written around the edge, such as 123 or AV. These are used to identify if the contact lens is put on correctly or not.
Rigid gas permeable bifocal contact lenses most commonly have a small lens on the bottom for the near correction, when the eyes are lowered to read, this lens comes into the optical path. RGPs must translate (move vertically) to work properly, and thus the gaze of the eye can change from the near to the distant sections, much like bifocal eyeglasses.
Multifocal soft contact lenses are more complex to manufacture and require more skill to fit. All soft bifocal contact lenses are considered "simultaneous vision" because both far and near vision corrections are presented simultaneously to the retina, regardless of the position of the eye. Of course, only one correction is correct, the incorrect correction causes blur. Commonly these are designed with distance correction in the center of the lens and near correction in the periphery, or vice versa.
Intraocular lenses, also known as an implantable contact lenses, are special small corrective lenses surgically implanted in the eye's posterior chamber behind the iris and in front of the lens to correct higher degrees of myopia and hyperopia.
Manufacturing of contact lenses
Most contact lenses are mass produced.
- Spin-cast lenses – A spin-cast lens is a soft contact lens manufactured by whirling liquid silicone in a revolving mold at high speed.
- Diamond turning – A diamond-turned contact lens is cut and polished on a CNC lathe. The lens starts out as a cylindrical disk held in the jaws of the lathe. The lathe is equipped with an industrial-grade diamond as the cutting tool. The CNC lathe may turn at nearly 6000 RPM as the cutter removes the desired amount of material from the inside of the lens. The concave (inner) surface of the lens is then polished with some fine abrasive paste, oil, and a small polyester cotton ball turned at high speeds. In order to hold the delicate lens in reverse manner, wax is used as an adhesive. The convex (outer) surface of the lens is thus cut and polished by the same process.
- Molded – Molding is used to manufacture some brands of soft contact lenses. Rotating molds are used and the molten material is added and shaped by centrifugal forces. Injection molding and computer control are also used to create nearly perfect lenses.
Although many companies make contact lenses, in the US there are four major manufacturers:
Extended Wear Contact Lenses
Silicone Hydrogel Lenses
Silicone is oxygen permeable. Silicone hydrogel lenses use both their water and polymer content to transmit oxygen to the eye.
The benefits to wearers include comfort and convenience. Silicone hydrogel contact lenses contain less water and deliver more oxygen to the eye than traditional hydrogel lenses. As a result, they aren't as prone to causing dehydration. For some people who wear their lenses for long days, this can mean better end-of-day comfort and allow for overnight wear. Some brands of silicone hydrogel lenses are approved for 30 days of continuous wear.
- Alphafilcon A
- Asmofilcon A
- Balafilcon A
- Comfilcon A
- Enfilcon A
- Etafilcon A
- Galyfilcon A
- Hilafilcon A
- Hilafilcon B
- Hioxifilcon A
- Hioxifilcon D
- Lotrafilcon B
- Methafilcon A
- Omafilcon A
- Phemfilcon A
- Senofilcon A
- Tetrafilcon A
- Vifilcon A
- POLY HEMA
Contact lens prescriptions
The prescribing of contact lenses is usually restricted to appropriately qualified eye care practitioners. In countries such as the United States (where all contact lenses are deemed to be medical devices by the Food and Drug Administration), the United Kingdom and Australia, optometrists are usually responsible. In France and Eastern European countries, ophthalmologists play the major role. In other parts of the world, opticians usually prescribe contact lenses. Prescriptions for contact lenses and glasses may be similar, but are not interchangeable.
The practitioner or contact lens fitter typically determines an individual's suitability for contact lenses during an eye examination. Corneal health is verified; ocular allergies or dry eyes may affect a person's ability to wear contact lenses successfully.
The parameters specified in a contact lenses prescription may include:
- Material (e.g. Oxygen Permeability/Transmissibility (Dk/L, Dk/t), water content, modulus; optional)
- Base curve radius (BC, BCR; required)
- Diameter (D, OAD; required)
- Power in dioptres (Spherical required, cylindrical only for correction of astigmatism, reading addition required only for bifocal prescription)
- Cylinder axis (Often just "Axis"; required only if a cylindrical correction is present)
- Center thickness (CT; optional and seldom provided)
- Brand (Optional)
Note that while a contact lens prescription may specify diameter and base curve of the ideal lens for a particular individual, many manufacturers only produce lenses at very limited intervals. Johnson & Johnson, which manufactures the "Acuvue 2" soft lens, only makes such lenses with base curves of either 8.3mm or 8.7mm, and only at a diameter of 14.0mm—such lenses are designed to fit a "target audience" that includes the vast majority of individuals who might fit such lenses or might at least find them sufficiently comfortable to wear.
Many people already wear contact lenses ordered over the Internet. In the United States, the Fairness to Contact Lens Consumers Act, which went into effect in 2004, was intended to ensure the availability of contact lens prescriptions to patients. Under the law consumers have a right to obtain a copy of their contact lens prescription, allowing them to fill that prescription at the business of their choice. Some controversy has arisen over the fact that online vendors are allowed to fill a prescription if the originating prescriber doesn't respond within eight business hours, as verifications are often sent during the prescriber's closed hours, allowing even an expired prescription to be filled.
Complications due to contact lens wear affect roughly 5% of contact lens wearers each year. Excessive wear of contact lenses, particularly overnight wear, is associated with most of the safety concerns. Problems associated with contact lens wear may affect the eyelid, the conjunctiva, the various layers of the cornea, and even the tear film that covers the outer surface of the eye.
Studies conducted on side effects from long-term wearing of contact lenses, i.e. over 5 years, such as by Zuguo Liu et al., 2000, concludes that "Long-term contact lens wear appears to decrease the entire corneal thickness and increase the corneal curvature and surface irregularity."
- Giant papillary conjunctivitis
- Superior limbic keratoconjunctivitis
- Corneal endothelium
Before touching the contact lens or one's eyes, it is important to thoroughly wash & rinse hands with a soap that does not contain moisturizers or allergens such as fragrances. The soap should not be antibacterial due to risk of improper hand washing and the possibility of destroying the natural bacteria found on the eye. These bacteria keep pathogenic bacteria from colonizing the cornea. The technique for removing or inserting a contact lens varies slightly depending upon whether the lens is soft or rigid.
In all cases, the insertion and removal of lenses requires some training and practice on the part of the user, in part to overcome the instinctive hesitation against actually touching the eyeball with one's fingertip.
Contact lenses are typically inserted into the eye by placing them on the index finger with the concave side upward and raising them to touch the cornea. The other hand may be employed to keep the eye open. Problems may arise particularly with disposable soft lenses; if the surface tension between the lens and the finger is too great the lens may turn itself inside out; alternatively it may fold itself in half. When the lens first contacts the eye, a brief period of irritation may ensue as the eye acclimatizes to the lens and also (if a multi-use lens is not correctly cleansed) as dirt on the lens irritates the eye. This may be relieved by placing a drop of saline or multipurpose solution into the lens prior to insertion, this also allows the lens to conform to the eye more quickly by lubricating both contact lens and eye surfaces. After insertion, irrigation may help if irritated, which generally should not exceed one minute. It may be noted that although with some types of contact lenses it is easy to tell if you have inserted the lens backwards (as it is usually painful and vision is impaired) you are able to determine the lens's correct position beforehand by holding the lens on the tip of your finger and squeezing the bottom of it with two fingers from your other hand, you will know you have it the correct way if the edges of the lens curve inward like a taco. If they curve out you need to flip the lens. With some types of lenses however, this is difficult as both sides look very much the same. With many lenses it is hard to tell whether they are inside out or not even when they are in the eye itself. This is because the vision and feel of the lens can be very similar for both sides. For these reasons many people try to ensure they keep visual track of the different sides of the contact lenses from the day they are open, if they suspect the lens is inside out they can always change its orientation at a later stage. It is never advisable to wear the lenses inside-out even if they feel comfortable and vision is good when doing so.
A soft lens may be removed by holding the eyelids open and grasping the lens with opposing digits. This method may cause irritation, could risk damage to the eye and may in many cases be difficult, in part due to the blink reflex. If the lens is pushed off the cornea (by touching the lens with your forefinger and looking towards your nose, moving the lens) it will buckle up (due to the difference in curvature), making it easier to grasp.
As an alternative method to grasping, once the lens is moved off the cornea to the inner corner of the eye, it can be pushed out of the eye by pressing downwards on the upper eyelid with a finger. With this method there is less risk of touching the eye with the fingers, and it may be easier for people with long fingernails.
Rigid contact lenses may be removed by pulling with one finger on the outer or lateral canthus, then blinking to cause the lens to lose adhesion. The other hand is typically cupped underneath the eye to catch the lens. There also exist small tools specifically for removing lenses, which resemble small plungers made of flexible plastic; the concave end is raised to the eye and touched to the lens, forming a seal stronger than that of the lens with the cornea and allowing the lens to be removed from the eye.
While daily disposable lenses require no cleaning, other types require regular cleaning and disinfecting in order to retain clear vision and prevent discomfort and infections by various microorganisms including bacteria, fungi, and Acanthamoeba, that form a biofilm on the lens surface. There are a lot of products that are used to cleans contact lenses:
- Multipurpose solutions – The most popular cleaning solution[clarification needed] for contact lenses; these are suitable for rinsing, disinfecting, cleaning and storing lenses, and in most cases eliminate the need for protein removal enzyme tablets. Some multipurpose solutions are not effective at disinfecting Acanthamoeba from the lens. In May 2007, one brand of multipurpose solution was recalled due to a cluster of Acanthamoeba infections. Newer generations of multipurpose solutions are effective against bacteria, fungi, and acanthamoeba and are designed to condition the lenses while soaking.
- Saline solution – Used for rinsing the lens after cleaning and preparing it for insertion. Saline solutions do not disinfect.
- Daily cleaner – Used to clean lenses on a daily basis. A few drops of cleaner are applied to the lens while it rests in the palm of the hand, and the lens is rubbed for about 20 seconds with a fingertip (depending on the product) on each side. Long fingernails can damage lenses.
- Hydrogen peroxide solution – Used for disinfecting the lenses, and available as 'two-step' or 'one-step' systems. With 'two-step' products, the peroxide must be rinsed away with saline before the lenses may be worn, because hydrogen peroxide is an irritant and strong oxidizer.
- Enzymatic cleaner – Used for cleaning protein deposits off lenses, usually weekly, if the daily cleaner is not sufficient. Typically, this cleaner is in tablet form. Protein deposits make use of contact lenses uncomfortable, and may lead to various eye problems.
- Ultraviolet, vibration or ultrasonic devices – Used to both disinfect and clean contact lenses. The lenses are inserted inside the portable device (running on batteries and/or plug-in) for 2 to 6 minutes during which both the microorganisms and protein build-up are thoroughly cleaned. Saline solution is typically used as multi-purpose solutions are not necessary. These devices are not usually available in optic retailers but are in some electro-domestic stores.
Some products must only be used with certain types of contact lenses. Water alone will not adequately disinfect the lens, and can lead to lens contamination and has been known in some cases to cause irreparable harm to the eye. Proper lens cleaning is important in warding off biofilm formation.
To keep the cleaning product as clean as possible, and to counteract minor contamination of the product and kill microorganisms on the contact lens, some products contain preservatives such as thiomersal, benzalkonium chloride, and benzyl alcohol. In 1989, thiomersal was responsible for about 10% of problems related to contact lenses: because of this, many products no longer contain thiomersal. Preservative-free products usually have shorter shelf lives. For example, non-aerosol preservative-free saline solutions can typically be used for only two weeks once opened. The introduction of silicone-hydrogel soft contact lens materials in 1999 made selection of the proper disinfecting solution more important.
A large segment of current contact lens research is directed towards the treatment and prevention of conditions resulting from contact lens contamination and colonization by foreign organisms. It is generally accepted by clinicians that the most significant complication of contact lens wear is microbial keratitis and that the most predominant microbial pathogen is Pseudomonas aeruginosa. Other organisms are also major causative factors in bacterial keratitis associated with contact lens wear, although their prevalence varies across different locations. These include both the Staphylococcus species (aureus and epidermidis) and the Streptococcus species, among others. Microbial keratitis is a serious focal point of current research due to its potentially devastating effect on the eye, including severe vision loss.
One specific research topic of interest is how microbes such as Pseudomonas aeruginosa invade the eye and cause infection. Although the pathogenesis of microbial keratitis is not well understood, many different factors have been investigated. One group of researchers showed that corneal hypoxia exacerbated Pseudomonas binding to the corneal epithelium, internalization of the microbes, and induction of the inflammatory response. One way to alleviate hypoxia is to increase the amount of oxygen transmitted to the cornea. Although silicone-hydrogel lenses almost eliminate hypoxia in patients due to their very high levels of oxygen transmissibility, they also seem to provide a more efficient platform for bacterial contamination and corneal infiltration than other conventional hydrogel soft contact lenses. A recent study showed that Pseudomonas aeruginosa and Staphylococcus epidermis adhere much more strongly to silicone hydrogel contact lenses than conventional hydrogel contact lenses and that adhesion of Pseudomonas aeruginosa was 20 times stronger than adhesion of Staphylococcus epidermidis. This might help to explain one reason why Pseudomonas infections are the most predominant.
Another important area of contact lens research deals with patient compliance. Compliance is a major issue surrounding the use of contact lenses because patient noncompliance often leads to contamination of the lens, storage case, or both. The introduction of multipurpose solutions and daily disposable lenses have helped to alleviate some of the problems observed from inadequate cleaning but new methods of combating microbial contamination are currently being developed. A silver-impregnated lens case has been developed which helps to eradicate any potentially contaminating microbes that come in contact with the lens case. Additionally, a number of antimicrobial agents are being developed that have been embedded into contact lenses themselves. Contact lenses with covalently attached Selenium molecules have been shown to reduce bacterial colonization without adversely affecting the cornea of a rabbit eye and octylglucoside used as a contact lens surfactant significantly decreases bacterial adhesion. These compounds are of particular interest to contact lens manufacturers and prescribing optometrists because they do not require any patient compliance to effectively attenuate the effects of bacterial colonization.
A recent area of research is in the field of bionic lenses. LED lights and circuitry have been designed into recent contact lenses (http://news.cnet.com/2300-11393_3-6227089.html) based on the early research of Eric Booth in the 70s, who specialized in both train engineering and electrical engineering. He attempted to design transistor circuitry in early rigid contact lenses, but not until 2011 was the research perfected with the use of red LED lighting.
- Bionic contact lens
- Corrective lens
- Eyeglass prescription
- Visual acuity
- Bates method
- Effects of Long-Term Contact Lens Wear on the Cornea
- Advantage and Disadvantage of contact lenses
- ^ Barr, J. "2004 Annual Report". Contact Lens Spectrum. January, 2005.
- ^ a b Nichols, Jason J., et al "ANNUAL REPORT: Contact Lenses 2010". January 2011.
- ^ Morgan, Philip B., et al "International Contact Lens Prescribing in 2010". Contact Lens Spectrum. October 2011.
- ^ Sokol, JL; Mier, MG; Bloom, S; Asbell, PA (1990). "A study of patient compliance in a contact lens-wearing population". The CLAO journal : official publication of the Contact Lens Association of Ophthalmologists, Inc 16 (3): 209–13. PMID 2379308.
- ^ Heitz, RF and Enoch, J. M. (1987) "Leonardo da Vinci: An assessment on his discourses on image formation in the eye." Advances in Diagnostic Visual Optics 19—26, Springer-Verlag.
- ^ Schifrin, Leonard G., et al. "The Contact Lens Industry: Structure, Competition, and Public Policy." United States Office of Technology Assessment. Dec. 1984.
- ^ "The History of Contact Lenses." eyeTopics.com. Accessed October 18, 2006.
- ^ Contact Lens Council
- ^ Pearson, RM; Efron, N (1989). "Hundredth anniversary of August Müller's inaugural dissertation on contact lenses". Survey of ophthalmology 34 (2): 133–41. PMID 2686057.
- ^ Hellemans, Alexander; Bunch, Bryan (1988). The Timetables of Science. Simon & Schuster. pp. 367. ISBN 0671621300.
- ^ Robert B. Mandell. Contact Lens Practice, 4th Edition. Charles C. Thomas, Springfield, IL, 1988.
- ^ U.S. Patent No. 2,510,438, filed February 28, 1948.
- ^ "The Corneal Lens", The Optician, September 2, 1949, pp. 141–144.
- ^ "Corneal Contact Lenses", The Optician, September 9, 1949, p. 185.
- ^ "New Contact Lens Fits Pupil Only", The New York Times, February 11, 1952, p. 27.
- ^ Pearce, Jeremy (2007-09-23). "Norman Gaylord, 84; helped develop type of contact lens". (New York Times News Service). The Boston Globe. http://www.boston.com/news/globe/obituaries/articles/2007/09/23/norman_gaylord_84_helped_develop_type_of_contact_lens/. Retrieved 2007-10-06.
- ^ Wichterle O, Lim, D. "Hydrophilic gels for biological use". Nature. 1960; 185:117–118.
- ^ Agarwal, Rishi K. (1972), Some Thoughts on Soft Lenses, The Contact Lens, volume 4, number 1, page 28.
- ^ Editorial note (1988), American Journal of Optometry and Physiological Optics, volume 65, number 9, page 744.
- ^ a b "Looking at Silicone Hydrogels Across Generations". Optometric Management. http://www.optometric.com/article.aspx?article=101727. Retrieved April 5, 2009.
- ^ "What are the types of contact lenses?"
- ^ "Different types of contact lenses."
- ^ Hartenbaum, NP; Stack, CM (1997). "Color vision deficiency and the X-Chrom lens". Occupational health & safety (Waco, Tex.) 66 (9): 36–40, 42. PMID 9314196.
- ^ Siegel, IM (1981). "The X-Chrom lens. On seeing red". Survey of ophthalmology 25 (5): 312–24. PMID 6971497.
- ^ Swarbrick, HA; Nguyen, P; Nguyen, T; Pham, P (2001). "The ChromaGen contact lens system: Colour vision test results and subjective responses". Ophthalmic & physiological optics : the journal of the British College of Ophthalmic Opticians (Optometrists) 21 (3): 182–96. PMID 11396392.
- ^ Harris D “Colouring Sight: A study of CL fittings with colour enhancing lenses” 'Optician' 8 June 1997
- ^ Harris DA, MacRow-Hill SJ “Application of ChromaGen haploscopic lenses to patients with dyslexia: a double masked placebo controlled trial” Journal of the American Optometric Association 25/10/99.
- ^ "A Guide to Theatrical Contact Lenses" eyecontactguide.com Accessed 31 December 2006
- ^ Morgan PB et al."International Contact Lens Prescribing in 2004: An analysis of more than 17,000 contact lens fits from 14 countries in 2004 reveals the diversity of contact lens practice worldwide." Contact Lens Spectrum. January 2005.
- ^ http://www.mc.vanderbilt.edu/news/releases.php?release=1670
- ^ EyeMDLink.com
- ^ "45 COVERAGE ISSUES – SUPPLIES – DRUGS 11–91 45" (PDF). Centers for Medicare and Medicaid Services. http://new.cms.hhs.gov/manuals/downloads/Pub06_PART_45.pdf. Retrieved 2006-03-01.
- ^ "Contact Lenses Employed for Drug Delivery."
- ^ FDA Premarket Notification for "new silicone hydrogel lens for daily wear" 'July 2008.
- ^ Lebow, KA; Goldberg, JB (1975). "Characteristic of binocular vision found for presbyopic patients wearing single vision contact lenses". Journal of the American Optometric Association 46 (11): 1116–23. PMID 802938.
- ^ a b Cassin, B. and Solomon, S. Dictionary of Eye Terminology. Gainsville, Florida: Triad Publishing Company, 1990.
- ^ Manufacture of soft contact lenses. The contact lens is kept moist throughout the entire molding process and is never dried then rehydrated. "Manufacture of soft contact lenses".
- ^ Federal Trade Commission. "The Strength of Competition in the Sale of Rx Contact Lenses: An FTC Study". February, 2005.
- ^ a b "Fairness to Contact Lens Consumers Act". October 15, 2003.
- ^ a b John Stamler. "Contact Lens Complications." eMedicine.com. September 1, 2004.
- ^ Efron N (July 2007). "Contact lens-induced changes in the anterior eye as observed in vivo with the confocal microscope". Prog Retin Eye Res 26 (4): 398–436. doi:10.1016/j.preteyeres.2007.03.003. PMID 17498998. http://linkinghub.elsevier.com/retrieve/pii/S1350-9462(07)00025-0.
- ^ Liu Z, Pflugfelder SC (January 2000). "The effects of long-term contact lens wear on corneal thickness, curvature, and surface regularity". Ophthalmology 107 (1): 105–11. doi:10.1016/S0161-6420(99)00027-5. PMID 10647727. http://linkinghub.elsevier.com/retrieve/pii/S0161-6420(99)00027-5.
- ^ Hollingsworth JG, Efron N (June 2004). "Confocal microscopy of the corneas of long-term rigid contact lens wearers". Cont Lens Anterior Eye 27 (2): 57–64. doi:10.1016/j.clae.2004.02.002. PMID 16303530. http://linkinghub.elsevier.com/retrieve/pii/S1367-0484(04)00018-9.
- ^ Zhivov A, Stave J, Vollmar B, Guthoff R (January 2007). "In vivo confocal microscopic evaluation of langerhans cell density and distribution in the corneal epithelium of healthy volunteers and contact lens wearers". Cornea 26 (1): 47–54. doi:10.1097/ICO.0b013e31802e3b55. PMID 17198013. http://meta.wkhealth.com/pt/pt-core/template-journal/lwwgateway/media/landingpage.htm?issn=0277-3740&volume=26&issue=1&spage=47.
- ^ Hiti, K; Walochnik, J; Haller-Schober, E M; Faschinger, C; Aspöck, H (February 2002). "Viability of Acanthamoeba after exposure to a multipurpose disinfecting contact lens solution and two hydrogen peroxide systems". British Journal of Ophthalmology 86 (2): 144–6. doi:10.1136/bjo.86.2.144. PMC 1771011. PMID 11815336. http://bjo.bmj.com/cgi/content/abstract/86/2/144
- ^ Early Report of Serious Eye Infections Associated with Soft Contact Lens Solution. CDC health advisory. May 25, 2007. CDCHAN-00260-2007-05-25-ADV-N
- ^ Acanthamoeba Keratitis --- Multiple States, 2005–2007. Center for Disease Control MMWR dispatch. May 26, 2007 / 56(Dispatch);1–3
- ^ Hughes, Reanne; Kilvington, Simon (July 2001). "Comparison of Hydrogen Peroxide Contact Lens Disinfection Systems and Solutions against Acanthamoeba polyphaga". Antimicrobial Agents and Chemotherapy 45 (7): 2038–43. doi:10.1128/AAC.45.7.2038-2043.2001. PMC 90597. PMID 11408220. http://aac.asm.org/cgi/content/full/45/7/2038
- ^ How Optical Ultrasonic Cleaners Work. http://www.tech-faq.com/how-optical-ultrasonic-cleaners-work.html.
- ^ White, Gina. Caring for Soft Contact Lenses. http://www.allaboutvision.com/contacts/caresoftlens.htm.
- ^ Ward, Michael. Soft Contact Lens Care Products. http://www.clspectrum.com/article.aspx?article=12384.
- ^ Contact Lens Wearing Guide
- ^ Wilson-Holt, N; Dart, JK (1989). "Thiomersal keratoconjunctivitis, frequency, clinical spectrum and diagnosis". Eye (London, England) 3 ( Pt 5): 581–7. PMID 2630335.
- ^ Robertson, DM, Petroll, WM, Jester, JV & Cavanagh, HD: Current concepts: contact lens related Pseudomonas keratitis. Cont Lens Anterior Eye, 30: 94–107, 2007.
- ^ Sharma, S, Kunimoto, D, Rao, N, Garg, P & Rao, G: Trends in antibiotic resistance of corneal pathogens: Part II. An analysis of leading bacterial keratitis isolates, 1999.
- ^ Verhelst D, Koppen C, Looveren JV, Meheus A, Tassignon M (2005) Clinical, epidemiological and cost aspects of contact lens related infectious keratitis in Belgium: results of a seven-year retrospective study. Bull Soc Belge Ophtalmol 297:7–15.
- ^ Burd EM, Ogawa GSH, Hyndiuk RA. Bacterial keratitis and conjunctivitis. In: Smolin G, Thoft RA, editors. The Cornea. Scientific Foundations and Clinical Practice. 3rd ed. Boston: Little, Brown, & Co, 1994. p 115–67.
- ^ Zaidi, T, Mowrey-McKee, M & Pier, GB: Hypoxia increases corneal cell expression of CFTR leading to increased Pseudomonas aeruginosa binding, internalization, and initiation of inflammation. Invest Ophthalmol Vis Sci, 45: 4066–74, 2004.
- ^ Sweeney DF, Keay L, Jalbert I. Clinical performance of silicone hydrogel lenses. In Sweeney DF, ed. Silicone Hydrogels: The Rebirth of Continuous Wear Contact Lenses. Woburn, Ma: Butterworth Heinemann; 2000.
- ^ Kodjikian, L, Casoli-Bergeron, E, Malet, F, Janin-Manificat, H, Freney, J, Burillon, C, Colin, J & Steghens, JP: Bacterial adhesion to conventional hydrogel and new silicone hydrogel contact lens materials. Graefes Arch Clin Exp Ophthalmol, 246: 267–73, 2008.
- ^ Yung MS, Boost M, Cho P, Yap M. Microbial contamination of contact lenses and lens care accessories of soft contact lens wearers (university students) in Hong Kong. Ophthalmic and Physiological Optics, 2007 Jan;27(1):11–21.
- ^ J. Midelfart, A. Midelfart and L. Bevanger, Microbial contamination of contact lens cases among medical students, CLAO J 22 (1996) (1), pp. 21–24.
- ^ T.B. Gray, R.T. Cursons, J.F. Sherwan and P.R. Rose, Acanthamoeba, bacterial, and fungal contamination of contact lens storage cases, Br J Ophthalmol 79 (1995), pp. 601–605.
- ^ Amos, CF & George, MD: Clinical and laboratory testing of a silver-impregnated lens case. Cont Lens Anterior Eye, 29: 247–55, 2006.
- ^ Mathews, SM, Spallholz, JE, Grimson, MJ, Dubielzig, RR, Gray, T & Reid, TW: Prevention of bacterial colonization of contact lenses with covalently attached selenium and effects on the rabbit cornea. Cornea, 25: 806–14, 2006.
- ^ Santos, L, Rodrigues, D, Lira, M, Oliveira, R, Real Oliveira, ME, Vilar, EY & Azeredo, J: The effect of octylglucoside and sodium cholate in Staphylococcus epidermidis and Pseudomonas aeruginosa adhesion to soft contact lenses. Optom Vis Sci, 84: 429–34, 2007.
- Efron, Nathan (2002). Contact Lens Practice, Elsevier Health Sciences. 0-7506-4690-X.
Wikimedia Foundation. 2010.
Look at other dictionaries:
contact lens — n. a tiny, thin correctional lens worn directly over the cornea of the eye: the lens floats on a film of tears … English World dictionary
contact lens — contact ,lens noun count a plastic LENS that you wear in your eye to help you see more clearly … Usage of the words and phrases in modern English
contact lens — ► NOUN ▪ a thin plastic lens placed directly on the surface of the eye to correct visual defects … English terms dictionary
contact lens — contact .lens n a small round piece of plastic that you put on your eye to help you see clearly … Dictionary of contemporary English
Contact lens — Lentilles de contact Verres de contact posés avec la face concave vers le haut … Wikipédia en Français
contact lens — one of a pair of small plastic disks that are held in place over the cornea by surface tension and correct vision defects inconspicuously. Cf. hard lens, intraocular lens, soft lens. [1885 90] * * * Thin artificial lens worn on the surface of the … Universalium
contact lens — UK / US noun [countable] Word forms contact lens : singular contact lens plural contact lenses a plastic lens that you wear in your eye to help you see more clearly … English dictionary
contact lens — noun A thin lens, made of flexible or rigid plastic, that is placed directly on to the eye to correct vision, used as an alternative to spectacles, or, if coloured, to change ones eye color cosmetically. Syn: contact, lens … Wiktionary
contact lens — (also lens) noun ADJECTIVE ▪ gas permeable, hard, soft ▪ daily wear, disposable ▪ extended wear ▪ tinted … Collocations dictionary
contact lens — sąlytinis lęšis statusas T sritis fizika atitikmenys: angl. contact lens vok. Kontaktlinse, f rus. контактная линза, f pranc. verre de contact, m … Fizikos terminų žodynas