Sound Reduction Index


Sound Reduction Index

This article needs to be created. Key-words:
* Sound Reduction Index.
* Difference Level
* Standardized Difference Level
* Normalized Difference Level.
* ISO-140
* Building Regulations
* Acoustics
* Sound Insulation.

Draft Article:

References

* [http://www.planningportal.gov.uk/uploads/br/BR_PDF_ADE_2003.pdf United Kingdom Building regulations Part E: Resistance to the passage of sound]

ISO 140 parts 1 - 14,ISO 717 parts 1, 2(not available online)

Sound Insulation

In most countries outside the USA the level of sound insulation provided by a structure such as a wall, window, door, or ventilator, is measured using methods defined in the series of international standards ISO 140 (parts 1 – 14), or the regional or national variants on these standards.

For techniques used in the USA see the alternative article Sound Transmission Class The basic method for both the actual measurements and the mathematical calculations behind both standards is similar, however they diverge to a significant degree in the detail, and in the numerical results produced.

Standardized methods exist for measuring the sound insulation produced by various structures in both laboratory and field (actual functional buildings and building sites) environments.

A number of indices are defined which each offer various benefits for different situations.

The most basic index is the Weighted Difference level Dw. This index is defined by measuring in decibels (dB), the noise level produced on each side of a building element under test (eg a wall) when noise is produced in a room on one side (or outdoors) and measured both in the room where the noise is produced and in the room on the other side of the element under test.

This measurement may be carried out by measuring the levels in octave bands, or in 1/3 octave bands. (the latter is normally used for most applications). The minimum requirements of the standards require for the frequency range from 100Hz to 3.15kHz to be measured (16 1/3 octave bands). In some situations measurements may be carried out in the bands down to 50 Hz and/or up to 10kHz.

The measured levels in each 1/3 ocatve band (or octave band) from the source room (or area) (S) are then compared to the measured levels in the receiving room (R), and the difference is taken (S-R). this produces a measured difference level 'D' for each frequency band in the measured spectrum.

To produce a single integer number the measured spectrum is plotted on a graph, and compared against a reference curve (defined in ISO 717-1 for airborne sound insulation, and 717-2 for impact sound insulation). The reference curve is moved in 1dB steps until the total of the unfavorable deviations (measured points on the graph below the reference graph) is as close to 32 as possible but not greater than 32.

The value of the reference curve at 500Hz is taken as the Weighted Difference Level, DwThis is considered to be approximately equal to the A-weighted level difference which would be observed if normal speech was used as the test signal.

There are other indices which may be measured which require the measurement of the reverberation time of one or both of the rooms being tested, and some of which are suitable for use in a laboratory, and some are suitable for field measurements.

In each case corrections due to the measured reverberation times, and background noise levels during the tests in the receiving room are applied to the measured level in the receiving room prior to taking the difference level. These indices include:

Sound Reduction Index.

This is a Laboratory only measurement, which uses knowledge of the relative sizes of the rooms in the test suite, and the reverberation time in the receiving room, and the known level of noise which can pass between the rooms in the suite by other routes (flanking) plus the size of the test sample to produce a very accurate and repeatable measurement of the performance of the sampled material or construction.

Apparent Sound Reduction Index.

This is a Field measurement which attempts to measure the sound reduction index of a material on a real completed construction (eg a wall between two offices, houses or cinema auditoria). It is unable to isolate or allow for the result of alternate sound transmission routes and therefore will generally produce a lower result than the laboratory measured value.

The calculation method used to produce the Sound Reduction Index takes into account the relative size of the tested rooms, and the size of the tested panel, and is therefore (theoretically independent of these features, therefore a 1x1 panel of plasterboard (drywall) should have the same Rw as a 10x10 panel.

Normalized Level Difference (Dn)

This is an index which is measured in field conditions, between "real" rooms. It is a measurement which deliberately includes effects due to flanking routes and differences in the relative size of the rooms. It attempts however to normalize the measured difference level to the level which would be present when the rooms are furnished by measuring the quantity of acoustic absorption in the receiving room and correcting the Difference level to the level which would be expected if there was 10m2 Sabine absorption in the receiving room. Detailed, accurate knowledge of the dimensions of the receiving room are required.

Standardized Level Difference (DnT)

Similar to the Normalized level difference, this index corrects the measured difference to a standardized reverberation time. For dwellings the standard reverberation time used is 0.5 seconds, for other larger spaces longer reverberation times will be used. 0.5 seconds is often cited as approximately average for a medium sized, carpeted and furnished living room. Due to not requiring detailed and accurate knowledge of the dimensions of the test rooms, this index is easier to obtain, and arguably of slightly more relevance.

Once the difference Level or sound reduction index is obtained, the weighted value may be obtained from the corrected spectrum as described above from the reference curve.

To be added

Impact sound insulation


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • sound reduction index — garso sumažėjimo rodiklis statusas T sritis Standartizacija ir metrologija apibrėžtis Dydis, apibūdinantis tam tikroje terpėje sklindančio garso galios sumažėjimą ir išreiškiamas formule: R = 0,5 ln(1/τ) = 0,5 ln10 lg(1/τ); čia τ – garso… …   Penkiakalbis aiškinamasis metrologijos terminų žodynas

  • Sound transmission class — (or STC) is an integer rating of how well a building partition attenuates airborne sound. In the USA, it is widely used to rate interior partitions, ceilings/floors, doors, windows and exterior wall configurations (see ASTM International… …   Wikipedia

  • Sound reinforcement system — A sound reinforcement system is an arrangement of microphones, electronic signal processors, amplifiers, and loudspeakers that makes live or pre recorded sounds usually music or speech louder, or that distributes the sound to a larger or more… …   Wikipedia

  • Sound masking — For other uses of masking , see Masking (disambiguation). Sound masking is the addition of natural or artificial sound (such as as white noise or pink noise) into an environment to cover up unwanted sound by using auditory masking. This is in… …   Wikipedia

  • Sound effect — For the album by The Jam, see Sound Affects. Sound effects or audio effects are artificially created or enhanced sounds, or sound processes used to emphasize artistic or other content of films, television shows, live performance, animation, video …   Wikipedia

  • Sound from ultrasound — Contents 1 Parametric array 2 Applications 2.1 Commercial advertising …   Wikipedia

  • Long Island Sound — is an estuary of the Atlantic Ocean and various rivers in the United States that lies between the coast of Connecticut to the north and Long Island, New York to the south. The mouth of the Connecticut River at Old Saybrook, Connecticut empties… …   Wikipedia

  • Accent reduction — Accent reduction, also known as accent modification, is a systematic approach used to learn or adopt a new accent. It is the process of learning the sound system (or phonology) of a language or dialect. The methodology involves several steps,… …   Wikipedia

  • Market reduction approach — In 1796, the London magistrate Patrick Colquhoun[1] observed that It rarely happens that thieves go upon the highway, or commit burglaries, until the money they have previously acquired is exhausted, and that ...without a safe and ready market he …   Wikipedia

  • ГОСТ Р 52797.1-2007: Акустика. Рекомендуемые методы проектирования малошумных рабочих мест производственных помещений. Часть 1. Принципы защиты от шума — Терминология ГОСТ Р 52797.1 2007: Акустика. Рекомендуемые методы проектирования малошумных рабочих мест производственных помещений. Часть 1. Принципы защиты от шума оригинал документа: 3.4.4 вносимые потери Di, дБ (insertion loss): Разность… …   Словарь-справочник терминов нормативно-технической документации


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.