Molecular assembler

Molecular assembler

Part of a series of articles on

Molecular Nanotechnology

Molecular assembler
Molecular machine
Productive nanosystems
K. Eric Drexler
Engines of Creation

See also
v · d · e

A molecular assembler, as defined by K. Eric Drexler, is a "proposed device able to guide chemical reactions by positioning reactive molecules with atomic precision". Some biological molecules such as ribosomes fit this definition. This is because they receive instructions from messenger RNA and then assemble specific sequences of amino acids to construct protein molecules. However, the term "molecular assembler" usually refers to theoretical human-made devices.

Beginning in 2007, the British Engineering and Physical Sciences Research Council funds development of ribosome-like molecular assemblers. Clearly, molecular assemblers are possible in this limited sense. A technology roadmap project, led by the Battelle Memorial Institute and hosted by several U.S. National Laboratories has explored a range of atomically precise fabrication technologies, including both early-generation and longer-term prospects for programmable molecular assembly; the report was released in December, 2007.[1]

Likewise, the term "molecular assembler" has been used in science fiction and popular culture to refer to a wide range of fantastic atom-manipulating nanomachines, many of which may be physically impossible in reality. Much of the controversy regarding "molecular assemblers" results from the confusion in the use of the name for both technical concepts and popular fantasies. In 1992, Drexler introduced the related but better-understood term "molecular manufacturing," which he defined as the programmed "chemical synthesis of complex structures by mechanically positioning reactive molecules, not by manipulating individual atoms."[2]

This article mostly discusses "molecular assemblers" in the popular sense. These include hypothetical machines that manipulate individual atoms and machines with organism-like self-replicating abilities, mobility, ability to consume food, and so forth. These are quite different from devices that merely (as defined above) "guide chemical reactions by positioning reactive molecules with atomic precision".

Because synthetic molecular assemblers have never been constructed and because of the confusion regarding the meaning of the term, there has been much controversy as to whether "molecular assemblers" are possible or simply science fiction. Confusion and controversy also stem from their classification as nanotechnology, which is an active area of laboratory research which has already been applied to the production of real products; however, there had been, until recently, no research efforts into the actual construction of "molecular assemblers". A primary criticism of the computational research into products of advanced "molecular assemblers" is that the structures investigated are impossible to make today.



A nanofactory is a proposed system in which nanomachines (resembling molecular assemblers, or industrial robot arms) would combine reactive molecules via mechanosynthesis to build larger atomically precise parts. These, in turn, would be assembled by positioning mechanisms of assorted sizes to build macroscopic (visible) but still atomically-precise products.

A typical nanofactory would fit in a desktop box, in the vision of K. Eric Drexler published in Nanosystems: Molecular Machinery, Manufacturing and Computation (1992), a notable work of "exploratory engineering". During the last decade, others have extended the nanofactory concept, including an analysis of nanofactory convergent assembly by Ralph Merkle, a systems design of a replicating nanofactory architecture by J. Storrs Hall, Forrest Bishop's "Universal Assembler", the patented exponential assembly process by Zyvex, and a top-level systems design for a 'primitive nanofactory' by Chris Phoenix (Director of Research at the Center for Responsible Nanotechnology). All of these nanofactory designs (and more) are summarized in Chapter 4 of Kinematic Self-Replicating Machines (2004) by Robert Freitas and Ralph Merkle. The Nanofactory Collaboration,[3] founded by Freitas and Merkle in 2000, is a focused ongoing effort involving 23 researchers from 10 organizations and 4 countries that is developing a practical research agenda[4] specifically aimed at positionally-controlled diamond mechanosynthesis and diamondoid nanofactory development.

In 2005, a computer-animated short film of the nanofactory concept was produced by John Burch, in collaboration with Drexler. Such visions have been the subject of much debate, on several intellectual levels. No one has discovered an insurmountable problem with the underlying theories and no one has proved that the theories can be translated into practice. However, the debate continues, with some of it being summarized in the Molecular nanotechnology article.

If nanofactories could be built, severe disruption to the world economy would be one of many possible negative impacts, though it could be argued that this disruption would have little negative effect if everyone had such nanofactories. Great benefits also would be anticipated. Various works of science fiction have explored these and similar concepts. The potential for such devices was part of the mandate of a major UK study led by mechanical engineering professor Dame Ann Dowling. The report is now complete.


"Molecular assemblers" have been confused with self-replicating machines. To produce a practical quantity of a desired product, the nanoscale size of a typical science fiction universal molecular assembler requires an extremely large number of such devices. However, a single such theoretical molecular assembler might be programmed to self-replicate, constructing many copies of itself. This would allow an exponential rate of production. Then after sufficient quantities of the molecular assemblers were available, they would then be re-programmed for production of the desired product. However, if self-replication of molecular assemblers were not restrained then it might lead to competition with naturally occurring organisms. This has been called ecophagy or the grey goo problem.[5]

One method to building molecular assemblers is to mimic evolutionary processes employed by biological systems. Biological evolution proceeds by random variation combined with culling of the less-successful variants and reproduction of the more-successful variants. Production of complex molecular assemblers might be evolved from simpler systems since "A complex system that works is invariably found to have evolved from a simple system that worked. . . . A complex system designed from scratch never works and can not be patched up to make it work. You have to start over, beginning with a system that works."[6] However, most published safety guidelines include "recommendations against developing ... replicator designs which permit surviving mutation or undergoing evolution".[7]

Most assembler designs keep the "source code" external to the physical assembler. At each step of a manufacturing process, that step is read from an ordinary computer file and "broadcast" to all the assemblers. If any assembler gets out of range of that computer, or when the link between that computer and the assemblers is broken, or when that computer is unplugged, the assemblers stop replicating. Such a "broadcast architecture" is one of the safety features recommended by the "Foresight Guidelines on Molecular Nanotechnology", and a map of the 137-dimensional replicator design space[8] recently published by Freitas and Merkle provides numerous practical methods by which replicators can be safely controlled by good design.

Drexler and Smalley debate

One of the most outspoken critics of some concepts of "molecular assemblers" was Professor Richard Smalley (1943–2005) who won the Nobel prize for his contributions to the field of nanotechnology. Smalley believed that such assemblers were not physically possible and introduced scientific objections to them. His two principal technical objections were termed the "fat fingers problem" and the "sticky fingers problem". He believed these would exclude the possibility of "molecular assemblers" that worked by precision picking and placing of individual atoms. Drexler and coworkers responded to these two issues[9] in a 2001 publication.

Smalley also believed that Drexler's speculations about apocalyptic dangers of self-replicating machines that have been equated with "molecular assemblers" would threaten the public support for development of nanotechnology. To address the debate between Drexler and Smalley regarding molecular assemblers Chemical & Engineering News published a point-counterpoint consisting of an exchange of letters that addressed the issues.[2]


Speculation on the power of systems that have been called "molecular assemblers" has sparked a wider political discussion on the implication of nanotechnology. This is in part due to the fact that nanotechnology is a very broad term and could include "molecular assemblers." Discussion of the possible implications of fantastic molecular assemblers has prompted calls for regulation of current and future nanotechnology. There are very real concerns with the potential health and ecological impact of nanotechnology that is being integrated in manufactured products. Greenpeace for instance commissioned a report concerning nanotechnology in which they express concern into the toxicity of nanomaterials that have been introduced in the environment.[10] However, it makes only passing references to "assembler" technology. The UK Royal Society and UK Royal Academy of Engineering also commissioned a report entitled "Nanoscience and nanotechnologies: opportunities and uncertainties"[11] regarding the larger social and ecological implications on nanotechnology. This report does not discuss the threat posed by potential so-called "molecular assemblers."

Formal scientific review

In 2006, U.S. National Academy of Sciences released the report of a study of molecular manufacturing as part of a longer report, A Matter of Size: Triennial Review of the National Nanotechnology Initiative[12] The study committee reviewed the technical content of Nanosystems, and in its conclusion states that no current theoretical analysis can be considered definitive regarding several questions of potential system performance, and that optimal paths for implementing high-performance systems cannot be predicted with confidence. It recommends experimental research to advance knowledge in this area:

"Although theoretical calculations can be made today, the eventually attainable range of chemical reaction cycles, error rates, speed of operation, and thermodynamic efficiencies of such bottom-up manufacturing systems cannot be reliably predicted at this time. Thus, the eventually attainable perfection and complexity of manufactured products, while they can be calculated in theory, cannot be predicted with confidence. Finally, the optimum research paths that might lead to systems which greatly exceed the thermodynamic efficiencies and other capabilities of biological systems cannot be reliably predicted at this time. Research funding that is based on the ability of investigators to produce experimental demonstrations that link to abstract models and guide long-term vision is most appropriate to achieve this goal."

Grey goo

One potential scenario that has been envisioned is out-of-control self-replicating molecular assemblers in the form of grey goo which consumes carbon to continue its replication. If unchecked such mechanical replication could potentially consume whole ecoregions or the whole Earth (ecophagy), or it could simply outcompete natural lifeforms for necessary resources such as carbon, ATP, or UV light (which some nanomotor examples run on). It is worth noting that the ecophagy and 'grey goo' scenarios, like synthetic molecular assemblers, are based upon still-theoretical technologies that have not yet been demonstrated experimentally.

In fiction

Molecular assemblers are a popular topic in science fiction, for example, the matter compiler in The Diamond Age and the cornucopia machine in Singularity Sky. The replicator in Star Trek might also be considered a molecular assembler. A molecular assembler is also a key element of the plot of the computer game Deus Ex (called a "universal constructor" in the game).

See also


  1. ^ Productive Nanosystems: a technology roadmap
  2. ^ a b C&En: Cover Story - Nanotechnology
  3. ^ Nanofactory Collaboration
  4. ^ Nanofactory Technical Challenges
  5. ^ Grey Goo is a Small Issue
  6. ^ Gall, John, (1986) Systemantics: How Systems Really Work and How They Fail, 2nd ed. Ann Arbor, MI : The General Systemantics Press.
  7. ^ Foresight Guidelines for Responsible Nanotechnology Development
  8. ^ Kinematic Self-Replicating Machines
  9. ^ Debate About Assemblers — Smalley Rebuttal
  10. ^ Future Technologies, Today’s Choices Nanotechnology, Artificial Intelligence and Robotics; A technical, political and institutional map of emerging technologies. A report for the Greenpeace Environmental Trust
  11. ^ Nanoscience and nanotechnologies: opportunities and uncertainties
  12. ^ A Matter of Size: Triennial Review of the National Nanotechnology Initiative

External links

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • molecular assembler —  Molecular Assembler  Молекулярный ассемблер   Молекулярное устройство, которое может быть запрограммировано для сборки практически любой молекулярной структуры или прибора из более простых химических строительных блоков. Подобие управляемого… …   Толковый англо-русский словарь по нанотехнологии. - М.

  • molecular assembler — noun A device that, given an object and sufficient atoms of the required elements, would build exact copies of it Syn: cornucopia machine …   Wiktionary

  • Molecular engineering — is any means of manufacturing molecules. It may be used to create, on an extremely small scale, most typically one at a time, new molecules which may not exist in nature, or be stable beyond a very narrow range of conditions. Today this is an… …   Wikipedia

  • Molecular nanotechnology — Part of a series of articles on Molecular Nanotechnology …   Wikipedia

  • Molecular machine — Part of a series of articles on Molecular Nanotechnology …   Wikipedia

  • Molecular self-assembly — An example of a molecular self assembly through hydrogen bonds.[1] Molecular self assembly is the process by which molecules adopt a defined arrangement without guidance or management from an outside source. Th …   Wikipedia

  • Drexler–Smalley debate on molecular nanotechnology — The Drexler–Smalley debate on molecular nanotechnology was a public dispute between K. Eric Drexler, founder of the field of molecular nanotechnology, and Richard Smalley, a recipient of the 1996 Nobel prize in Chemistry for the discovery of the… …   Wikipedia

  • Universal assembler — A Universal Assembler is a construction machine that manipulates and builds with individual atoms, molecules, or other units, originally studied by John von Neumann who is also known for his work on universal computers. Assemblers capable of… …   Wikipedia

  • молекулярный ассемблер —  Molecular Assembler  Молекулярный ассемблер   Молекулярное устройство, которое может быть запрограммировано для сборки практически любой молекулярной структуры или прибора из более простых химических строительных блоков. Подобие управляемого… …   Толковый англо-русский словарь по нанотехнологии. - М.

  • Nanotechnology — Part of a series of articles on …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.