- Water Resistant mark
Water Resistant is a common
markstamped on the back of wrist watches to indicate how well a watch is sealed against ingress of water. It is usually accompanied by an indication of the static test pressure that a sample of newly manufactured watches was exposed to in a leakage test. The test pressure can be indicated either directly in bars, or (more commonly) as an equivalent water depth in meters (in the United States sometimes also in feet).
An indication of the test pressure in terms of water depth does not mean that the watch was designed for use in such water depths. For example, a watch marked at 30 meters depth cannot be expected to withstand activity in a swimming pool, let alone continue to function at 30 meters under water. This is because the test is conducted only once using static pressure on newly manufactured watches. In practical use, a watch is subjected to variations in pressure which can add pressure to the static pressure of the water. Examples of this include the movement of a swimmer's arm through the water, or violent sprays encountered in water skiing. The test for qualifying a
diving watchfor repeated usage in a given depth includes safety margins to take factors in account like aging of the seals, rapidly changing water pressure and temperature, as well as dynamic mechanical stresses encountered by a watch.
ISO 2281 water-resistant watches standard
International Organization for Standardizationissued a standard for water resistant watches which also prohibits the term "waterproof" to be used with watches, which many countries have adopted. The international standard ISO 2281 Horology -- Water-resistant watches defines the water resistance of watches. This standard was only designed for watches intended for ordinary daily use during exercises under water for a short period under conditions where water pressure and temperature vary.
The ISO 2281 standard specifies a detailed testing procedure for each mark that defines not only pressures but also test duration, water temperature, and other parameters. Besides this ISO 2859-2 Sampling plans indexed by limiting quality (LQ) for isolated lot inspection and ISO 2859-3 Sampling procedures for inspection by attributes -- Part 3: Skip-lot sampling procedures concerning procedures regarding lot sampeling testing come into play, since not every single watch has to be tested for ISO 2281 approval.
ISO 2281 water resistance testing of a watch consists of:
* Immersion of the watch in 10 cm of water for 1 hour.
* Immersion of the watch in 10 cm of water with a force of 5 N perpendicular to the crown and pusher buttons (if any) for 10 minutes.
* Immersion of the watch in 10 cm of water at the following temperatures for 5 minutes each, 40°C, 20°C and 40°C again, with the transition between temperatures not to exceed 5 minutes. No evidence of water intrusion or condensation is allowed.
* Immersion of the watch in a suitable pressure vessel and subjecting it to the rated pressure for 1 hour. No evidence of water intrusion or condensation is allowed.
* Exposing the watch to an overpressure of 2 bar. The watch shall show no air-flow exceeding 50 μg/min.
* No magnetic or shock resistance properties are required.
* No negative pressure test is required.
* No strap attachment test is required.
* No corrosion test is required.
Except the thermal shock resistance test all further ISO 2281 testing should be conducted at 18°C to 25°C temperature. Regarding pressure ISO 2281 defines: 1 bar = 105 Pa = 105 N/m2.
In practice, the survivability of the watch will depend not only on the water depth, but also on the age of the sealing material, past damage, temperature, and additional mechanical stresses.
None of the tests defined by ISO 2281 are suitable to qualify a watch for
scuba diving. Such watches are designed for everyday life and must be water resistant during exercises such as swimming. They can be worn in different temperature and pressure conditions but are under no circumstances designed for diving with underwater breathing apparatus.
ISO 6425 divers' watches standard
The standards and features for
diving watches are regulated by the ISO 6425 - Divers' watches international standard. ISO 6425 defines such watches as: A watch designed to withstand diving in water at depths of at least 100 m and processing a system to control the time. Diving watches are tested in static or still water under 125% of the rated (water)pressure, thus a watch with a 200 meter rating will be water resistant if it is stationary and under 250 meters of static water. The testing of the water resistance is fundamentally different from non-dive watches, because every watch has to be fully tested.
ISO 6425 water resistance testing of a diver's watch consists of:
* Reliability under water. The watches under test shall be immersed in water to a depth of 30 cm ± 2 cm for 50 hours at 18°C to 25°C and all the mechanisms shall still function correctly. The condensation test shall be carried out before and after this test to ensure that the result is related to the above test.
* Condensation test. The watch shall be placed on a heated plate at a temperature between 40°C and 45°C until the watch has reached the temperature of the heated plate (in practice, a heating time of 10 minutes to 20 minutes, depending on the type of watch, will be sufficient). A drop of water, at a temperature of 18°C to 25°C shall be placed on the glass of the watch. After about 1 minute, the glass shall be wiped with a dry rag. Any watch which has condensation on the interior surface of the glass shall be eliminated.
* Resistance of crowns and other setting devices to an external force. The watches under test shall be subjected to an overpressure in water of 125% of the rated pressure/10 bar for 10 minutes and to an external force of 5 N perpendicular to the crown and pusher buttons (if any). The condensation test shall be carried out before and after this test to ensure that the result is related to the above test.
* Water-tightness and resistance at a water overpressure. The watches under test shall be immersed in water contained in a suitable vessel. Then an overpressure of 125% of the rated pressure shall be applied within 1 minute and maintained for 2 hours. Subsequently the overpressure shall be reduced to 0.3 bar within 1 minute and maintained at this pressure for 1 hour. The watches shall then be removed from the water and dried with a rag. No evidence of water intrusion or condensation is allowed.
* Resistance to thermal shock. Immersion of the watch in 30 cm ± 2 cm of water at the following temperatures for 10 minutes each, 40°C, 5°C and 40°C again. The time of transition from one immersion to the other shall not exceed 1 min. No evidence of water intrusion or condensation is allowed.
* An optional test originating from the ISO 2281 tests (but not required for obtaining ISO 6425 approval) is exposing the watch to an overpressure of 2 bar. The watch shall show no air-flow exceeding 50 μg/min.
Except the thermal shock resistance test all further ISO 6425 testing should be conducted at 18°C to 25°C temperature. Regarding pressure ISO 6425 defines: 1 bar = 105 Pa = 105 N/m2.The required 125% test pressure provides a safety margin against dynamic pressure increase events, water density variations (
seawateris 2 to 5% denser than freshwater) and degradation of the seals.
Movement induced dynamic pressure increase is sometimes the subject of urban myths and marketing arguments for diver's watches with high water resistance ratings. When a diver makes a fast swimming movement of 10 m/s (32.8 ft/s) (the best competitive swimmers and finswimmers can not nearly swim that fast) physics dictates that the diver generates a dynamic pressure of 0.5 bar or the equivalent of 5 meters of additional water depth. [Dynamic pressure is the pressure induced by movement in dense fluids, in the case of a diver typically the pressure caused by his swimming movements in water. As a reminder 1 ATM = 1 kg/cm2. A dynamic pressure of 1 ATM (for example the flow of a river) on the surface of a hand (assuming the surface of an "average hand" of 150 cm2) will correspond to a dynamic pressure induced force of Auto kg|150|0.
In order to calculate the dynamic pressure caused by a fast underwater swimming movement of a diver this formula can be applied: P = 0.5*ρ*v2
P = dynamic pressure in Pa (1 atm = 1.01325*105 Pa)
ρ (rho) = density of the fluid in kg/m3
v = speed in meters per second
For a fast swimming movement of 10 m/s this works out as:
ρ (rho) of typical sea water = 1026 kg/m3
v = 10 m/s
P = (0,5 * 1026) * (10 * 10) = 51 300 Pa = 0.5063 ATM
This calculation shows that fast swimming movements will not create dynamic pressure surges exceeding 0.5 ATM (the equivalent of 5 meters of water pressure).]
Besides water resistance standards to a minimum of 100 meter (330 ft) depth rating ISO 6425 also provides minimum requirements for mechanical diver's watches (quartz and digital watches have slightly differing readability requirements) such as [ [http://www.citizenwatch.com/Technical/English/Full/B873_ebook.pdf Manual of a 300 m mixed gas diver's watch dealing with many diving watch characteristics.] ] :
* The presence of a time-preselecting device, for example a unidirectional rotating bezel or a digital display. Such a device shall be protected against inadvertent rotation or wrong manipulation. If it is a rotating bezel, it shall have a minute scale going up to 60 min. The markings indicating every 5 min shall be clearly indicated. The markings on the dial, if existing, shall be coordinated with those of the preselecting device and shall be clearly visible. If the preselecting device is a digital display, it shall be clearly visible.
* The following items of the watch shall be legible at a distance of 25 cm (9.84 in) in the dark:
**time (the minute hand shall be clearly distinguishable from the hour hand);
**set time of the time-preselecting device;
**indication that the watch is running (This is usually indicated by a running second hand with a luminous tip or tail.);
**in the case of battery-powered watches, a battery end-of-life indication.
* The presence of an indication that the watch is running in total darkness. This is usually indicated by a running second hand with a luminous tip or tail.
* Magnetic resistance. This is tested by 3 expositions to a direct current magnetic field of 4,800 A/m. The watch must keep its accuracy to +/- 30 seconds/day as measured before the test despite the magnetic field.
* Shock resistance. This is tested by two shocks (one on the 9 o'clock side, and one to the crystal and perpendicular to the face). The shock is usually delivered by a hard plastic hammer mounted as a pendulum, so as to deliver a measured amount of energy, specifically, a 3 kg hammer with an impact velocity of 4.43 m/sec. The change in rate allowed is +/- 60 seconds/day.
*Resistance to salt water. The watches under test shall be put in a 30 g/l NaCl (sodium chloride) solution and kept there for 24 hours at 18°C to 25°C. This test water solution has salinity comparable to normal
seawater. After this test, the case and accessories shall be examined for any possible changes. Moving parts, particularly the rotating bezel, shall be checked for correct functioning.
* Resistance of attachments to an external force (strap/band solidity). This is tested by applying a force of 200 N to each springbar (or attaching point) in opposite directions with no damage to the watch of attachment point. The bracelet of the watch being tested shall be closed.
* Marking. Watches conforming to ISO 6425 are marked with the word DIVER’S WATCH L M or DIVER'S L M to distinguish diving watches from look a like watches that are not suitable for actual scuba diving. The letter L indicates the diving depth, in metres, guaranteed by the manufacturer.
Diver’s watches for mixed-gas diving
Diving at a great depth and for a long period is done in a diving chamber, with the diver spending time alternately in the water and in a pressurized environment, breathing a gas mixture. In this case, the watch is subjected to the pressure of the gas mixture and its functioning can be disturbed. Consequently, it is recommended to subject the watch to a special extra test.ISO 6425 defines a diver’s watch for mixed-gas diving as: A watch required to be resistant during diving in water to a depth of at least 100 m and to be unaffected by the overpressure of the mixed gas used for breathing.
The following specific additional requirements for testing of diver's watches for mixed-gas diving are provided by ISO 6425:
* Test of operation at a gas overpressure. The watch is subject to the overpressure of gas which will actually be used, i.e. 125% of the rated pressure, for 15 days. Then a rapid reduction in pressure to the atmospheric pressure shall be carried out in a time not exceeding 3 minutes. After this test, the watch shall function correctly. An electronic watch shall function normally during and after the test. A mechanical watch shall function normally after the test (the power reserve normally being less than 15 days).
* Test by internal pressure (simulation of decompression). Remove the crown together with the winding and/or setting stem. In its place, fit a crown of the same type with a hole. Through this hole, introduce the gas mixture which will actually be used and create an overpressure of the rated pressure/20 bar in the watch for a period of 10 hours. Then carry out the test at the rated water overpressure. In this case, the original crown with the stem shall be refitted beforehand. After this test, the watch shall function correctly.
* Marking. Watches used for mix-gas diving which satisfy the test requirements are marked with the words "DIVER’S WATCH L M FOR MIXED-GAS DIVING". The letter L indicates the diving depth, in metres, guaranteed by the manufacturer. The composition of the gas mixture used for the test shall be given in the operating instructions accompanying the watch.
Most manufacturers recommend divers to have their diving watch pressure tested by an authorized service and repair facility annually or every two to three years and have the seals replaced.
Water resistance classification
Watches are classified by their degree of water resistance, which roughly translates to the following (1 metre = 3.2808398950131 feet): [ [http://www.jwnz.co.nz/brochures/watches.asp This water resistance classification guide has been developed by the Jewellers and Watchmakers of New Zealand (Inc.) in conjunction with the major watch importers and wholesalers in New Zealand.] ]
* Magnetic resistant watch
Shock resistant watch
* [http://www.breitlingsource.com/articles_water_resistance.shtml Water Resistance Explained on Breitling Site]
Wikimedia Foundation. 2010.
Look at other dictionaries:
Mark Twain — Mark Twain, photo by A. F. Bradley New York, 1907 Born … Wikipedia
Mark 24 Mine — The Mark 24 Mine (also known as FIDO or Fido) was a US air dropped passive acoustic homing anti submarine torpedo used during the Second World War against German and Japanese submarines. It entered service in March 1943 and continued in service… … Wikipedia
Mark 24 FIDO Torpedo — The Mark 24 FIDO Torpedo was a US air dropped passive acoustic homing anti submarine torpedo used during the Second World War against German and Japanese submarines. It entered service in March 1943 and continued in service with the US Navy until … Wikipedia
Shock resistant watch — Shock resistant is a common mark stamped on the back of wrist watches to indicate how well a watch copes with shocks.ISO 1413 shock resistant standardThe International Organization for Standardization issued a standard for shock resistant watches … Wikipedia
Hot water crust pastry — Hot water crust is a type of pastry used for savoury pies, such as pork pies, game pies and, more rarely, steak and kidney pies. Hot water crust was traditionally used for making hand raised pies.As the name suggests, the pastry is made by… … Wikipedia
Twain, Mark — orig. Samuel Langhorne Clemens born Nov. 30, 1835, Florida, Mo., U.S. died April 21, 1910, Redding, Conn. U.S. humorist, writer, and lecturer. He grew up in Hannibal, Mo., on the Mississippi River. At age 13 he was apprenticed to a local printer … Universalium
Distilled water — Bottle for Distilled water in the Real Farmacia in Madrid. Distilled water is water that has many of its impurities removed through distillation. Distillation involves boiling the water and then condensing the steam into a clean container.… … Wikipedia
Nonpoint source water pollution regulations in the United States — Nonpoint source (NPS) water pollution regulations are environmental regulations that restrict or limit water pollution from diffuse or nonpoint effluent sources such as polluted runoff from agricultural areas in a river catchments or wind borne… … Wikipedia
Falling Water River — The Falling Water River is a stream located in the east central portion of Middle Tennessee. It rises in Putnam County in a dissected portion of the Cumberland Plateau. The stream descends rather steeply and is crossed by Interstate 40. Just… … Wikipedia
Diving watch — Omega Seamaster model 2220.80, with a water resistance of 300 m (1,000 ft). The second crown (at 10 o clock) is a helium release valve. A diving watch is a watch designed for underwater diving that features, as a minimum, a water… … Wikipedia