Numerically-controlled oscillator


Numerically-controlled oscillator

A numerically controlled oscillator (NCO) or digitally controlled oscillator (DCO) is an electronic system for synthesizing a range of frequencies from a fixed timebase. The name is an analogy with "voltage-controlled oscillator".

"Note: the term "digitally controlled oscillator" has also been used to describe the combination of a voltage-controlled oscillator driven by a control signal from a digital-to-analog converter. This article is about the more recent design."

Capabilities and limitations

Unlike a phase-locked loop-based analog frequency synthesiser, it is capable of synthesizing a very wide range of precise frequency ratios. The NCO will generate spectral side bands symmetrically on either side of the time base frequency. The upper sideband will be attenuated compared with the lower sideband. However, the upper sideband can be successfully used in frequency synthesizers.

NCO based communications systems are attractive because they are phase continuous, a fact that is advantageous to know when receiving the signal from an NCO based transmitter.

Operation

A DCO or NCO, generally, consists of several parts:
#A "phase accumulator", which performs the role of a digital waveform generator by incrementing a phase counter by a per-sample increment.
#A "phase-to-amplitude converter", which is usually implemented in the form of a (ROM) read-only memory. Phase values are looked up in a waveform table to create a waveform at any desired phase offset.
#A DAC digital-to-analog converter is then needed, if an analog output is desired. In that case, the set of waveform sample values that are sequentially extracted from the lookup table during step 2 of the process, is sent to a digital-to-analog converter to produce an analog waveform.
#The output of the DAC will need to be subsequently filtered by an analog filter (also known in the industry as deglitcher) in order to remove aliasing and DAC artifacts (glitches). Alternatively, the digital waveform may be used directly as an input for further digital signal processing.

In this way, the frequency ratios that can be produced are limited only to the precision of the arithmetic used to compute the phase. At the same time, DCOs are phase- and frequency-agile, and can trivially be modified to produce phase-modulated or frequency-modulated outputs, or quadrature outputs.

A DCO (or NCO) can consist of a digital counter such as the 82C53 chip. These produce square wave signals that are very accurate.The square wave can then be modified by standard analog waveshaping techniques.DCOs have been used as cheap replacements for VCOs in somesynthesizers.In these applications, their greatest benefit is stability along with having no frequency drift.

ee also

*Direct digital synthesis


Wikimedia Foundation. 2010.

Look at other dictionaries:

  • Numerically controlled oscillator — A numerically controlled oscillator (NCO) is a digital signal generator which creates a synchronous (i.e. clocked), discrete time, discrete valued representation of a waveform, usually sinusoidal.[1] NCOs are often used in conjunction with a… …   Wikipedia

  • Numerically Controlled Oscillator — Ein Digitally Controlled Oscillator (DCO, engl. Digital angesteuerter Oszillator) oder auch Numerically Controlled Oscillator (NCO, engl. Numerisch angesteuerter Oszillator) ist ein elektronisches Bauelement, welches basierend auf einer fixen… …   Deutsch Wikipedia

  • Digitally controlled oscillator — A digitally controlled oscillator or DCO is a hybrid digital/analogue electronic oscillator used in synthesizers. The name is an analogy with voltage controlled oscillator . DCOs were designed to overcome the tuning stability limitations of early …   Wikipedia

  • Voltage-controlled oscillator — A voltage controlled oscillator or VCO is an electronic oscillator designed to be controlled in oscillation frequency by a voltage input. The frequency of oscillation is varied by the applied DC voltage, while modulating signals may also be fed… …   Wikipedia

  • Digitally Controlled Oscillator — Ein Digitally Controlled Oscillator (DCO, engl. Digital gesteuerter Oszillator) oder auch Numerically Controlled Oscillator (NCO, engl. Numerisch gesteuerter Oszillator) ist eine elektronische Schaltung oder ein elektronisches Bauelement, welches …   Deutsch Wikipedia

  • Phase-locked loop — PLL redirects here. For other uses, see PLL (disambiguation). A phase locked loop or phase lock loop (PLL) is a control system that generates an output signal whose phase is related to the phase of an input reference signal. It is an electronic… …   Wikipedia

  • Direct digital synthesizer — A DDS function generator. Direct Digital Synthesizer (DDS) is a type of frequency synthesizer used for creating arbitrary waveforms from a single, fixed frequency reference clock. Applications of DDS include: signal generation, local oscillators… …   Wikipedia

  • Frequenzsynthesizer — Eine Phasenregelschleife, auch als Phase locked loop (PLL) bezeichnet, ist eine elektronische Schaltungsanordnung, die die Phasenlage und damit zusammenhängend die Frequenz eines veränderbaren Oszillators über einen geschlossenen Regelkreis so… …   Deutsch Wikipedia

  • Phase-locked Loop — Eine Phasenregelschleife, auch als Phase locked loop (PLL) bezeichnet, ist eine elektronische Schaltungsanordnung, die die Phasenlage und damit zusammenhängend die Frequenz eines veränderbaren Oszillators über einen geschlossenen Regelkreis so… …   Deutsch Wikipedia

  • Phasenregelkreis — Eine Phasenregelschleife, auch als Phase locked loop (PLL) bezeichnet, ist eine elektronische Schaltungsanordnung, die die Phasenlage und damit zusammenhängend die Frequenz eines veränderbaren Oszillators über einen geschlossenen Regelkreis so… …   Deutsch Wikipedia


Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.