 Sample size determination

Sample size determination is the act of choosing the number of observations to include in a statistical sample. The sample size is an important feature of any empirical study in which the goal is to make inferences about a population from a sample. In practice, the sample size used in a study is determined based on the expense of data collection, and the need to have sufficient statistical power. In complicated studies there may be several different sample sizes involved in the study: for example, in as survey sampling involving stratified sampling there would be different sample sizes for each population. In a census, data are collected on the entire population, hence the sample size is equal to the population size. In experimental design, where a study may be divided into different treatment groups, there may be different sample sizes for each group.
Sample sizes may be chosen in several different ways:
 expedience  For example, include those items readily available or convenient to collect. A choice of small sample sizes, though sometimes necessary, can result in wide confidence intervals or risks of errors in statistical hypothesis testing.
 using a target variance for an estimate to be derived from the sample eventually obtained
 using a target for the power of a statistical test to be applied once the sample is collected.
How samples are collected is discussed in sampling (statistics) and survey data collection.
Contents
Introduction
Larger sample sizes generally lead to increased precision when estimating unknown parameters. For example, if we wish to know the proportion of a certain species of fish that is infected with a pathogen, we would generally have a more accurate estimate of this proportion if we sampled and examined 200, rather than 100 fish. Several fundamental facts of mathematical statistics describe this phenomenon, including the law of large numbers and the central limit theorem.
In some situations, the increase in accuracy for larger sample sizes is minimal, or even nonexistent. This can result from the presence of systematic errors or strong dependence in the data, or if the data follow a heavytailed distribution.
Sample sizes are judged based on the quality of the resulting estimates. For example, if a proportion is being estimated, one may wish to have the 95% confidence interval be less than 0.06 units wide. Alternatively, sample size may be assessed based on the power of a hypothesis test. For example, if we are comparing the support for a certain political candidate among women with the support for that candidate among men, we may wish to have 80% power to detect a difference in the support levels of 0.04 units.
Estimating proportions and means
A relatively simple situation is estimation of a proportion. For example, we may wish to estimate the proportion of residents in a community who are at least 65 years old.
The estimator of a proportion is , where X is the number of 'positive' observations (e.g. the number of people out of the n sampled people who are at least 65 years old). When the observations are independent, this estimator has a (scaled) binomial distribution (and is also the sample mean of data from a Bernoulli distribution). The maximum variance of this distribution is 0.25/n, which occurs when the true parameter is p = 0.5. In practice, since p is unknown, the maximum variance is often used to for sample size assessments.
For sufficiently large n, the distribution of will be closely approximated by a normal distribution with the same mean and variance.^{[1]} Using this approximation, it can be shown that around 95% of this distribution's probability lies within 2 standard deviations of the mean. Because of this, an interval of the form
will form a 95% confidence interval for the true proportion. If this interval needs to be no more than W units wide, the equation
can be solved for n, yielding^{[2]}^{[3]} n = 4/W^{2} = 1/B^{2} where B is the error bound on the estimate, i.e., the estimate is usually given as within ± B. So, for B = 10% one requires n = 100, for B = 5% one needs n = 400, for B = 3% the requirement approximates to n = 1000, while for B = 1% a sample size of n = 10000 is required. These numbers are quoted often in news reports of opinion polls and other sample surveys.
Estimation of means
A proportion is a special case of a mean. When estimating the population mean using an independent and identically distributed (iid) sample of size n, where each data value has variance σ^{2}, the standard error of the sample mean is:
This expression describes quantitatively how the estimate becomes more precise as the sample size increases. Using the central limit theorem to justify approximating the sample mean with a normal distribution yields an approximate 95% confidence interval of the form
If we wish to have a confidence interval that is W units in width, we would solve
for n, yielding the sample size n = 16σ^{2}/W^{2}.
For example, if we are interested in estimating the amount by which a drug lowers a subject's blood pressure with a confidence interval that is six units wide, and we know that the standard deviation of blood pressure in the population is 15, then the required sample size is 100.
Required sample sizes for hypothesis tests
A common problem facing statisticians is calculating the sample size required to yield a certain power for a test, given a predetermined Type I error rate α. As follows, this can be estimated by predetermined tables for certain values, by Mead's resource equation, or, more generalized, by the cumulative distribution function:
By tables
^{[4]}
PowerCohen's d 0.2 0.5 0.8 0.25 84 14 6 0.50 193 32 13 0.60 246 40 16 0.70 310 50 20 0.80 393 64 26 0.90 526 85 34 0.95 651 105 42 0.99 920 148 58 The table shown at right can be used to in a twosample ttest to estimate the sample sizes of an experimental group and a control group that are of equal size, that is, the total number of individuals in the trial is twice that of the number given, and the desired significance level is 0.05.^{[4]} The parameters used are:
 The desired statistical power of the trial, shown in column to the left.
 Cohen's d, which is the expected difference between the means of the target values between the experimental group and the control group, divided by the expected standard deviation.
Mead's resource equation
Mead's resource equation is often used for estimating sample sizes of laboratory animals, as well as in many other laboratory experiments. It may not be as accurate as using other methods in estimating sample size, but gives a hint of what is the appropriate sample size where parameters such as expected standard deviations or expected differences in values between groups are unknown or very hard to estimate.^{[5]}
All the parameters in the equation are in fact the degrees of freedom of the number of their concepts, and hence, their numbers are subtracted by 1 before insertion into the equation.
The equation is:^{[5]}
 E = N − B − T,
where:
 N is the total number of individuals or units in the study (minus 1)
 B is the blocking component, representing environmental effects allowed for in the design (minus 1)
 T is the treatment component, corresponding to the number of treatment groups (including control group) being used, or the number of questions being asked (minus 1)
 E is the degrees of freedom of the error component, and should be somewhere between 10 and 20.
For example, if a study using laboratory animals is planned with four treatment groups (T=3), with eight animals per group, making 32 animals total (N=31), without any further stratification (B=0), then E would equal 28, which is above the cutoff of 20, indicating that sample size may be a bit too large, and six animals per group might be more appropriate.^{[6]}
By cumulative distribution function
Let X_{i}, i = 1, 2, ..., n be independent observations taken from a normal distribution with unknown mean μ and known variance σ^{2}. Let us consider two hypotheses, a null hypothesis:
 H_{0}:μ = 0
and an alternative hypothesis:
 H_{a}:μ = μ ^{*}
for some 'smallest significant difference' μ^{*} >0. This is the smallest value for which we care about observing a difference. Now, if we wish to (1) reject H_{0} with a probability of at least 1β when H_{a} is true (i.e. a power of 1β), and (2) reject H_{0} with probability α when H_{0} is true, then we need the following:
If z_{α} is the upper α percentage point of the standard normal distribution, then
and so
 'Reject H_{0} if our sample average () is more than '
is a decision rule which satisfies (2). (Note, this is a 1tailed test)
Now we wish for this to happen with a probability at least 1β when H_{a} is true. In this case, our sample average will come from a Normal distribution with mean μ^{*}. Therefore we require
Through careful manipulation, this can be shown to happen when
where Φ is the normal cumulative distribution function.
Stratified sample size
With more complicated sampling techniques, such as stratified sampling, the sample can often be split up into subsamples. Typically, if there are k such subsamples (from k different strata) then each of them will have a sample size n_{i}, i = 1, 2, ..., k. These n_{i} must conform to the rule that n_{1} + n_{2} + ... + n_{k} = n (i.e. that the total sample size is given by the sum of the subsample sizes). Selecting these n_{i} optimally can be done in various ways, using (for example) Neyman's optimal allocation.
There are many reasons to use stratified sampling:^{[7]} to decrease variances of sample estimates, to use partly nonrandom methods, or to study strata individually. A useful, partly nonrandom method would be to sample individuals where easily accessible, but, where not, sample clusters to save travel costs.^{[citation needed]}
In general, for H strata, a weighted sample mean is
with
 ^{[8]}
The weights, W(h), frequently, but not always, represent the proportions of the population elements in the strata, and W(h)=N(h)/N. For a fixed sample size, that is n=Sum{n(h)},
 ^{[9]}
which can be made a minimum if the sampling rate within each stratum is made proportional to the standard deviation within each stratum: n_{h} / N_{h} = kS_{h}.
An "optimum allocation" is reached when the sampling rates within the strata are made directly proportional to the standard deviations within the strata and inversely proportional to the square roots of the costs per element within the strata:
 ^{[10]}
or, more generally, when
 ^{[11]}
See also
 Degrees of freedom (statistics)
 Design of experiments
 Replication (statistics)
 Sampling (statistics)
 Statistical power
 Stratified Sampling
 Engineering response surface example under Stepwise regression.
Notes
 ^ NIST/SEMATECH, "7.2.4.2. Sample sizes required", eHandbook of Statistical Methods.
 ^ "Large Sample Estimation of a Population Proportion"
 ^ "Confidence Interval for a Proportion"
 ^ ^{a} ^{b} Chapter 13, page 215, in: Kenny, David A. (1987). Statistics for the social and behavioral sciences. Boston: Little, Brown. ISBN 0316489158.
 ^ ^{a} ^{b} Kirkwood, James; Robert Hubrecht (2010). The UFAW Handbook on the Care and Management of Laboratory and Other Research Animals. WileyBlackwell. pp. 29. ISBN 1405175230. online Page 29
 ^ Isogenic.info > Resource equation by Michael FW Festing. Updated Sept. 2006
 ^ Kish (1965, Section 3.1)
 ^ Kish (1965), p.78.
 ^ Kish (1965), p.81.
 ^ Kish (1965), p.93.
 ^ Kish (1965), p.94.
References
 Bartlett, J. E., II, Kotrlik, J. W., & Higgins, C. (2001). "Organizational research: Determining appropriate sample size for survey research", Information Technology, Learning, and Performance Journal, 19(1) 4350.
 Kish, L. (1965), Survey Sampling, Wiley. ISBN 047148900x
Further reading
 NIST: Selecting Sample Sizes
 Raven Analytics: Sample Size Calculations
 ASTM E12207: Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
External links
Categories:
Wikimedia Foundation. 2010.
Look at other dictionaries:
sample preparation — ▪ chemistry Introduction in analytical chemistry (chemistry), the processes in which a representative piece of material is extracted from a larger amount and readied for analysis. Sampling and sample preparation have a unique meaning and special … Universalium
Sizeexclusion chromatography — Equipment for running size exclusion chromatography. The buffer is pumped through the column (right) by a computer controlled device Acronym SEC Classification Chromatography Analytes … Wikipedia
Size exclusion chromatography — Infobox chemical analysis name = Size exclusion chromatography caption =Equipment for running size exclusion chromatography. The buffer is pumped through the column (right) by a computer controlled device acronym = SEC classification… … Wikipedia
size marker — DNA fragments of known molecular weight and base pair length, such as ë phage digested with the restriction enzyme Hind III, run on electrophoresis gels for the determination of DNA sample fragment sizes … Forensic science glossary
Effect size — In statistics, an effect size is a measure of the strength of the relationship between two variables in a statistical population, or a sample based estimate of that quantity. An effect size calculated from data is a descriptive statistic that… … Wikipedia
Coefficient of determination — In statistics, the coefficient of determination R2 is used in the context of statistical models whose main purpose is the prediction of future outcomes on the basis of other related information. It is the proportion of variability in a data set… … Wikipedia
Particle size distribution — The particle size distribution [Jillavenkatesa A, Dapkunas S J, Lin Sien Lum, Particle Size Characterization , NIST Special Publication 960 1, 2001] (PSD) of a powder, or granular material, or particles dispersed in fluid, is a list of values or… … Wikipedia
Particlesize analysis — This article describes the determination of the size of particulate solids, where the meaning of the particle excludes those of subatomic particles, which belong to the field of particle physics.Particle size analysis, particle size measurement,… … Wikipedia
Hidden surface determination — In 3D computer graphics, hidden surface determination (also known as hidden surface removal (HSR), occlusion culling (OC) or visible surface determination (VSD)) is the process used to determine which surfaces and parts of surfaces are not… … Wikipedia
Opinion poll — An opinion poll, sometimes simply referred to as a poll is a survey of public opinion from a particular sample. Opinion polls are usually designed to represent the opinions of a population by conducting a series of questions and then… … Wikipedia