 Porosity

Porosity or void fraction is a measure of the void (i.e., "empty") spaces in a material, and is a fraction of the volume of voids over the total volume, between 0–1, or as a percentage between 0–100%. The term is used in multiple fields including pharmaceutics, ceramics, metallurgy, materials, manufacturing, earth sciences and construction.
Contents
Void fraction in twophase flow
In gasliquid twophase flow, the void fraction is defined as the fraction of the flowchannel volume that is occupied by the gas phase or, alternatively, as the fraction of the crosssectional area of the channel that is occupied by the gas phase.^{[1]} Void fraction usually varies from location to location in the flow channel (depending on the twophase flow pattern). It fluctuates with time and its value is usually time averaged. In separated (i.e., nonhomogeneous) flow, it is related to volumetric flow rates of the gas and the liquid phase, and to the ratio of the velocity of the two phases (called slip ratio).
Porosity in earth sciences and construction
Used in geology, hydrogeology, soil science, and building science, the porosity of a porous medium (such as rock or sediment) describes the fraction of void space in the material, where the void may contain, for example, air or water. It is defined by the ratio:
where V_{V} is the volume of voidspace (such as fluids) and V_{T} is the total or bulk volume of material, including the solid and void components. Both the mathematical symbols ϕ and n are used to denote porosity.
Porosity is a fraction between 0 and 1, typically ranging from less than 0.01 for solid granite to more than 0.5 for peat and clay. It may also be represented in percent terms by multiplying the fraction by 100.
The porosity of a rock, or sedimentary layer, is an important consideration when attempting to evaluate the potential volume of water or hydrocarbons it may contain. Sedimentary porosity is a complicated function of many factors, including but not limited to: rate of burial, depth of burial, the nature of the connate fluids, the nature of overlying sediments (which may impede fluid expulsion). One commonly used relationship between porosity and depth is given by the Athy (1930) equation:^{[2]}
where ϕ_{0} is the surface porosity, k is the compaction coefficient (m^{−1}) and z is depth (m).
A value for porosity can alternatively be calculated from the bulk density ρ_{bulk} and particle density ρ_{particle}:
Normal particle density is assumed to be approximately 2.65 g/cm^{3}, although a better estimation can be obtained by examining the lithology of the particles.
Porosity and hydraulic conductivity
Porosity can be proportional to hydraulic conductivity; for two similar sandy aquifers, the one with a higher porosity will typically have a higher hydraulic conductivity (more open area for the flow of water), but there are many complications to this relationship. The principal complication is that there is not a direct proportionality between porosity and hydraulic conductivity but rather an inferred proportionality. There is a clear proportionality between pore throat radii and hydraulic conductivity. Also, there tends to be a proportionality between pore throat radii and pore volume. If the proportionality between pore throat radii and porosity exists then a proportionality between porosity and hydraulic conductivity may exist. However, as grain size and/or sorting decreases the proportionality between pore throat radii and porosity begins to fail and therefore so does the proportionality between porosity and hydraulic conductivity. For example: clays typically have very low hydraulic conductivity (due to their small pore throat radii) but also have very high porosities (due to the structured nature of clay minerals), which means clays can hold a large volume of water per volume of bulk material, but they do not release water rapidly and therefore have low hydraulic conductivity.
Sorting and porosity
Well sorted (grains of approximately all one size) materials have higher porosity than similarly sized poorly sorted materials (where smaller particles fill the gaps between larger particles). The graphic illustrates how some smaller grains can effectively fill the pores (where all water flow takes place), drastically reducing porosity and hydraulic conductivity, while only being a small fraction of the total volume of the material. For tables of common porosity values for earth materials, see the "further reading" section in the Hydrogeology article.
Porosity of rocks
Consolidated rocks (e.g. sandstone, shale, granite or limestone) potentially have more complex "dual" porosities, as compared with alluvial sediment. This can be split into connected and unconnected porosity. Connected porosity is more easily measured through the volume of gas or liquid that can flow into the rock, whereas fluids cannot access unconnected pores.
Porosity of soil
Porosity of surface soil typically decreases as particle size increases. This is due to soil aggregate formation in finer textured surface soils when subject to soil biological processes. Aggregation involves particulate adhesion and higher resistance to compaction. Typical bulk density of sandy soil is between 1.5 and 1.7 g/cm³. This calculates to a porosity between 0.43 and 0.36. Typical bulk density of clay soil is between 1.1 and 1.3 g/cm³. This calculates to a porosity between 0.58 and 0.51. This seems counterintuitive because clay soils are termed heavy, implying lower porosity. Heavy apparently refers to a gravitational moisture content effect in combination with terminology that harkens back to the relative force required to pull a tillage implement through the clayey soil at field moisture content as compared to sand.
Porosity of subsurface soil is lower than in surface soil due to compaction by gravity. Porosity of 0.20 is considered normal for unsorted gravel size material at depths below the biomantle. Porosity in finer material below the aggregating influence of pedogenesis can be expected to approximate this value.
Soil porosity is complex. Traditional models regard porosity as continuous. This fails to account for anomalous features and produces only approximate results. Furthermore it cannot help model the influence of environmental factors which affect pore geometry. A number of more complex models have been proposed, including fractals, bubble theory, cracking theory, Boolean grain process, packed sphere, and numerous other models. See also Characterisation of pore space in soil.
Types of geologic porosities
 Primary porosity
 The main or original porosity system in a rock or unconfined alluvial deposit.
 Secondary porosity
 A subsequent or separate porosity system in a rock, often enhancing overall porosity of a rock. This can be a result of chemical leeching of minerals or the generation of a fracture system. This can replace the primary porosity or coexist with it (see dual porosity below).
 Fracture porosity
 This is porosity associated with a fracture system or faulting. This can create secondary porosity in rocks that otherwise would not be reservoirs for hydrocarbons due to their primary porosity being destroyed (for example due to depth of burial) or of a rock type not normally considered a reservoir (for example igneous intrusions or metasediments).
 Vuggy porosity
 This is secondary porosity generated by dissolution of large features (such as macrofossils) in carbonate rocks leaving large holes, vugs, or even caves.
 Effective porosity (also called open porosity)
 Refers to the fraction of the total volume in which fluid flow is effectively taking place and includes Caternary and deadend (as these pores cannot be flushed, but they can cause fluid movement by release of pressure like gas expansion^{[3]}) pores and excludes closed pores (or nonconnected cavities). This is very important for groundwater and petroleum flow, as well as for solute transport.
 Ineffective porosity (also called closed porosity)
 Refers to the fraction of the total volume in fluids or gases are present but in which fluid flow can not effectively take place and includes the closed pores. Understanding the morphology of the porosity is thus very important for groundwater and petroleum flow.
 Dual porosity
 Refers to the conceptual idea that there are two overlapping reservoirs which interact. In fractured rock aquifers, the rock mass and fractures are often simulated as being two overlapping but distinct bodies. Delayed yield, and leaky aquifer flow solutions are both mathematically similar solutions to that obtained for dual porosity; in all three cases water comes from two mathematically different reservoirs (whether or not they are physically different).
 Macro porosity
 Refers to pores greater than 50 nm in diameter. Flow through macropores is described by bulk diffusion.
 Meso porosity
 Refers to pores greater than 2 nm and less than 50 nm in diameter. Flow through mesopores is described by Knudsen diffusion.
 Micro porosity
 Refers to pores smaller than 2 nm in diameter. Movement in micropores is by activated diffusion.
Measuring porosity
Several methods can be employed to measure porosity:
 Direct methods (determining the bulk volume of the porous sample, and then determining the volume of the skeletal material with no pores (pore volume = total volume − material volume).
 Optical methods (e.g., determining the area of the material versus the area of the pores visible under the microscope). The "areal" and "volumetric" porosities are equal for porous media with random structure.^{[4]}
 Computed tomography method (using industrial CT scanning to create a 3D rendering of external and internal geometry, including voids. Then implementing a defect analysis utilizing computer software)
 Imbibition methods,^{[4]} i.e., immersion of the porous sample, under vacuum, in a fluid that preferentially wets the pores.
 Water saturation method (pore volume = total volume of water − volume of water left after soaking).
 Water evaporation method (pore volume = (weight of saturated sample − weight of dried sample)/density of water)
 Mercury intrusion porosimetry (several nonmercury intrusion techniques have been developed due to toxicological concerns, and the fact that mercury tends to form amalgams with several metals and alloys).
 Gas expansion method.^{[4]} A sample of known bulk volume is enclosed in a container of known volume. It is connected to another container with a known volume which is evacuated (i.e., near vacuum pressure). When a valve connecting the two containers is opened, gas passes from the first container to the second until a uniform pressure distribution is attained. Using ideal gas law, the volume of the pores is calculated as
 ,
where
 V_{V} is the effective volume of the pores,
 V_{T} is the bulk volume of the sample,
 V_{a} is the volume of the container containing the sample,
 V_{b} is the volume of the evacuated container,
 P_{1} is the initial pressure in the initial pressure in volume V_{a} and V_{V}, and
 P_{2} is final pressure present in the entire system.
 The porosity follows straightforwardly by its proper definition
 .
 Note that this method assumes that gas communicates between the pores and the surrounding volume. In practice, this means that the pores must not be closed cavities.
 Thermoporosimetry and cryoporometry. A small crystal of a liquid melts at a lower temperature than the bulk liquid, as given by the GibbsThomson equation. Thus if a liquid is imbibed into a porous material, and frozen, the melting temperature will provide information on the poresize distribution. The detection of the melting can be done by sensing the transient heat flows during phasechanges using differential scanning calorimetry  (DSC thermoporometry),^{[5]} measuring the quantity of mobile liquid using nuclear magnetic resonance  (NMR cryoporometry)^{[6]} or measuring the amplitude of neutron scattering from the imbibed crystalline or liquid phases  (ND cryoporometry).^{[7]}
See also
References
 Glasbey, C. A.; G. W. Horgan and J. F. Darbyshire (September 1991). "Image analysis and threedimensional modelling of pores in soil aggregates". Journal of Soil Science 42 (3): 479–486. doi:10.1111/j.13652389.1991.tb00424.x.
 Horgan, G. W.; B. C. Ball (1994). "Simulating diffusion in a Boolean model of soil pores". European Journal of Soil Science 45 (4): 483–491. doi:10.1111/j.13652389.1994.tb00534.x.
 Horgan, Graham W. (19961001). A review of soil pore models. http://www.bioss.sari.ac.uk/~graham/sprev.pdf. Retrieved 20060416.
 Horgan, G. W. (June 1998). "Mathematical morphology for soil image analysis". European Journal of Soil Science 49 (2): 161–173. doi:10.1046/j.13652389.1998.00160.x.
 Horgan, G. W. (February 1999). "An investigation of the geometric influences on pore space diffusion". Geoderma 88 (1–2): 55–71. doi:10.1016/S00167061(98)000755.
 Nelson, J. Roy (January 2000). "Physics of impregnation". Microscopy Today 8 (1). http://microscopytoday.com/PDFFiles/MT200001small.pdf.^{[dead link]}
Footnotes
 ^ G.F. Hewitt, G.L. Shires, Y.V.Polezhaev (editors), "International Encyclopedia of Heat and Mass Transfer", CRC Press, 1997.
 ^ ATHY L.F., 1930. Density, porosity and compactation of sedimentary rocks, Bull. Amer. Assoc. Petrol. Geol. v. 14, pp. 124.
 ^ Effective and Ineffective Porosity at E&P Geology.com
 ^ ^{a} ^{b} ^{c} F.A.L. Dullien, "Porous Media. Fluid Transport and Pore Structure", Academic Press, 1992.
 ^ Brun, M.; Lallemand, A.; Quinson, JF.; Eyraud, C. (1977). "A new method for the simultaneous determination of the size and the shape of pores: The Thermoporometry". Thermochimica Acta (Elsevier Scientific Publishing Company) 21: 59–88. doi:10.1016/00406031(77)851228
 ^ Mitchell, J.; Webber, J. Beau W.; Strange, J.H. (2008). "Nuclear Magnetic Resonance Cryoporometry". Phys. Rep. 461: 1–36. Bibcode 2008PhR...461....1M. doi:10.1016/j.physrep.2008.02.001
 ^ Webber, J. Beau W.; Dore, John C. (2008). "Neutron Diffraction Cryoporometry  a measurement technique for studying mesoporous materials and the phases of contained liquids and their crystalline forms". Nucl. Instrum. Meth. A. 586 (2): 356–366. doi:10.1016/j.nima.2007.12.004
Topics in geotechnical engineering Soils Soil properties Hydraulic conductivity · Water content · Void ratio · Bulk density · Thixotropy · Reynolds' dilatancy · Angle of repose · Cohesion · Porosity · Permeability · Specific storageSoil mechanics Geotechnical investigation Laboratory tests Field tests Foundations Bearing capacity · Shallow foundation · Deep foundation · Dynamic load testing · Pile integrity test · Wave equation analysis · Statnamic load testRetaining walls Slope stability Earthquakes Geosynthetics Instrumentation for Stability Monitoring Categories: Aquifers
 Hydrogeology
 Petroleum
 Porous media
 Soil physics
 Soil mechanics
Wikimedia Foundation. 2010.
Look at other dictionaries:
Porosity — Po*ros i*ty, n. [Cf. F. porosit[ e].] The quality or state of being porous; opposed to density. [1913 Webster] … The Collaborative International Dictionary of English
Porosity — Porosity. См. Пористость. (Источник: «Металлы и сплавы. Справочник.» Под редакцией Ю.П. Солнцева; НПО Профессионал , НПО Мир и семья ; Санкт Петербург, 2003 г.) … Словарь металлургических терминов
porosity — (n.) late 14c., from M.L. porositas, from porus (see PORE (Cf. pore) (n.)) … Etymology dictionary
porosity — [pō räs′ə tē, pəräs′ə tē] n. pl. porosities [ME porositee < ML porositas: see POROUS + ITY] 1. the quality or state of being porous 2. the ratio, usually expressed as a percentage, of the volume of a material s pores, as in rock, to its total… … English World dictionary
porosity — 1. The ratio of the aggregate volume of interstices in a rock or soil to its total volume; generally stated as a percentage [10]. 2. The ratio, usually expressed as a percentage, of the total volume of voids of a given porous medium to the… … Lexicon of Cave and Karst Terminology
porosity — [[t]pɔːrɒ̱sɪti[/t]] N UNCOUNT Porosity is the quality of being porous. [FORMAL] ...the porosity of the coal … English dictionary
porosity — in the paper industry, porosity is generally measured by the time (in seconds) required for 100 cubic centimeters of air to pass through one square inch of the paper at a standard pressure difference. Thus the porosity unit is square inch… … Dictionary of units of measurement
porosity — akytumas statusas T sritis Standartizacija ir metrologija apibrėžtis Akytoje terpėje esančių ertmių bendrojo tūrio ir viso terpės tūrio dalmuo. priedas( ai) Grafinis formatas atitikmenys: angl. porosity vok. Porosität, f rus. пористость, f pranc … Penkiakalbis aiškinamasis metrologijos terminų žodynas
porosity — akytumas statusas T sritis Standartizacija ir metrologija apibrėžtis Medžiagos savybė turėti daugybę atvirų ertmių. atitikmenys: angl. porosity vok. Porosität, f rus. пористость, f pranc. porosité, f … Penkiakalbis aiškinamasis metrologijos terminų žodynas
porosity — akytumas statusas T sritis chemija apibrėžtis Medžiagos savybė turėti daug mažų ertmių. atitikmenys: angl. poriness; porosity; porousness; sponginess; voidage rus. пористость; ячеистость ryšiai: sinonimas – porėtumas sinonimas – poringumas … Chemijos terminų aiškinamasis žodynas