Example of numeric vihuela tablature from the book "Orphenica Lyra" by Miguel de Fuenllana (1554). Red numerals (original) mark the vocal part.

Tablature (or tabulature, or tab for short) is a form of musical notation indicating instrument fingering rather than musical pitches.

Tablature is common for fretted stringed instruments such as the lute, vihuela, or guitar, as well as many free reed aerophones such as the harmonica. Tablature was common during the Renaissance and Baroque eras, and is commonly used in notating rock, pop, folk, ragtime, bluegrass, and blues music.

Three types of organ tablature were used in Europe: German, Spanish and Italian. There are several types of ocarina tabulature.[1] Harp tablature was used in Spain and Wales.

To distinguish standard musical notation from tablature, the former is usually called "staff notation" or just "notation".

An alternate usage of the word "tab" is common on the Internet, where it can also refer to conventional chord symbols (for harmony), or note names (for melody).




The word tablature originates from the Latin word tabulatura. Tabula is a table or slate, in Latin. To tabulate something means to put it into a table or chart.


There are two different common spellings, with (tabulature) and without "u" (tablature). While "tabulature" is closer to the original Latin word, and thus more correct etymologically, the adapted version "tablature" seems to be more widespread in modern English.[2][original research?]

Both of these words are frequently shortened to "tab" in casual speech. To be less ambiguous, it is preceded by an instrument name, when required, e.g., "guitar tab", "bass tab", "organ tab".


The first known occurrence in Europe is around 1300, and was first used for notating music for the organ.[3][page needed]

Lute tablatures were of three main varieties, French, Italian (also widely used in Spain, Bavaria and southern France), and German, detailed below. A special variety of Italian tablature called "Neapolitan" was in use in southern Italy, and a Polish variety of French tablature appears in one manuscript. French tablature gradually came to be the most widely used. Tablatures for other instruments were also used from early on. Keyboard tablatures flourished in Germany and in Spain. Much of the music for the lute and other historical plucked instruments during the Renaissance and Baroque eras was originally written in tablature, and many modern players of those instruments still prefer this kind of notation, often using facsimiles of the original prints or manuscripts, handwritten copies, modern editions in tablature, or printouts made with computer programs.[4][Full citation needed]


While standard musical notation represents the rhythm and duration of each note and its pitch relative to the scale based on a twelve tone division of the octave, tablature is instead operationally based, indicating where and when a finger should be placed to generate a note, so pitch is denoted implicitly rather than explicitly. The rhythmic symbols of tablature tell when to start a note, but usually there is no indication of when to stop sounding it, so duration is at the discretion of the performer to a greater extent than is the case in conventional musical notation. Tablature for plucked strings is based upon a diagrammatic representation of the strings and frets of the instrument, keyboard tablature represents the keys of the instrument, and recorder tablature shows whether each of the fingerholes is to be closed or left open.

Tablature vs. standard staff notation

Tablature is more easily read by a novice fretted string musician than standard notation; all one needs to do is tune the instrument, place one's fingers on the indicated string and fret, and sound the note. During the Renaissance, tablature was used by professionals and amateurs alike to set down music for lute, cittern, bandora, orpharion, four- and five-course early guitar, and violas da gamba. Repertoire for lute began to change during the 18th century; use of the lute in orchestras to play basso continuo obliged lutenists to work from parts written in the staff notation suitable also for keyboard instruments and harps. Tabulature continued in use for solo lute and guitar works, but eventually lost popularity and nearly died out, remaining in informal use amongst amateurs, aficionados, and within folk idioms such as flamenco.[citation needed]

Victorian-era musicologists found themselves in a quandary when it came to publishing scholarly editions; players of the original instruments were uncommon, whereas most musicologists did play piano.[citation needed] Editions prior to the early music movement presented the music transcribed for guitar or piano (or both), leaving lute players at a loss for their own repertoire as it was originally published. Popular interest in early music created a need for performing editions of Renaissance repertoire in tablature.[citation needed]

After World War II ended, acoustic and electric guitar became popular, and guitar tablature was reborn.[citation needed]

Tablature notation has two significant deficiencies. First is an inability to convey the duration of notes sustained against a melisma. Only the beginning of each note can be shown; which notes of a chord should be sustained, and for how long, is an artistic decision for the player.

The second problem is one of choice. Historical lute tablature has three major forms (French, German, Italian); each of these has variants. Modern players usually specialize in just one form, and it is difficult to become facile at reading all of them. The surviving repertoire is divided roughly equally, with French and Italian being preferred by modern players over German (especially facsimile editions, as the originals were published in black letter type which is unfamiliar to modern readers). Modern publishers have a difficult decision to make in choosing a form for a modern anthology.[citation needed]

Differences between systems

  • Direct visual representation
When compared to standard notation, tablature is a closer visual representation of the instrument's fretboard. It does not require as much training for players to be able to read tablature; therefore it is often easier and quicker to interpret for beginners.
  • Fingering position determination
Tablature removes the requirement for the player to determine the fretboard position within which the notated music is to be executed. Notes on the guitar can be played in different fret hand positions and upon several different strings; for example the note C4 could be played on the third string at the fifth fret or on the fourth string at the tenth fret. In the case of fretted instruments such complexity makes the relationship between staff notation and playing technique less direct than in the case of the piano and many other instruments. Whilst standard staff notation can remove the string/fret ambiguity by further indicating the playing position (usually with Roman numerals), tablature does not contain this ambiguity. Tablature has two additional advantages. First, it clearly identifies the note. Tablature makes explicit all instances of musica ficta, so that there is no guesswork about whether a note is, for example, an F or an F. Second, tablature can notate music in different tunings and scordaturas.
  • Simple typewriter-font representation
Tablature can be easily (albeit crudely) represented as ASCII tab. This is a plain-text computer file using numbers, letters, and symbols to construct tablature. This characteristic makes it easy to distribute tablature electronically, a practice that has become very widespread; it is now possible to find free tablatures for virtually any popular music on the Internet, although a considerable number of those tablatures may be inaccurate and also illegal. (See Tablature (Legal Issue) below.)
  • Instrument-specific
Tablature is instrument-specific, while staff notation is generic. Tablature does not provide any skills transferable to other instrumental or general musical study. Tablature can only be read easily by a player of one particular instrument, whilst music written in staff notation can be played on any suitable instrument. Reading solely from tablature compromises communication with other musicians such as flаutists or violinists, who are commonly trained only in the use of standard notation. Reliance solely upon tablature limits the repertoire of the player to works published in tablature or transcribed into it. A player who can read both forms of notation is at a decided advantage.
  • Inherent harmonic or analytical information
The science of harmony and musical analysis is codified by recourse to standard musical notation. Standard musical scores enable musicians to utilise advanced tools for such analysis. These tools cannot be easily applied to, or from, tablature. Therefore the study of musical theory is hindered by reliance upon tablature.
  • Rhythmic information
Tablature notation provides limited information on rhythm and timing. Tablature writers sometimes provide limited rhythmic information by adding note stems, flags and beams above the fret glyphs but the system is not as well-defined as in standard notation.
  • Distinction between musical parts
Multiple parts cannot be rhythmically distinguished within tablature notation. This is a serious limitation when conveying information required for the proper rendition of multiple-part music on any polyphonic instrument.
  • Indication of pitch
Tablature notation shows how the notes are fingered; relative pitch is shown and actual pitch can be calculated by considering the tuning, but it takes experience for a player to sing (or internalize) the notes by sight. Dynamic markup is usually left to the performers artistic sense. It can be difficult to get a general outline of the music by simply studying the tablature page without recourse to playing it through or listening to a recorded version beforehand. In contrast staff notation allows musicians to sing from sight.

Lute tablature

French Renaissance style lute tablature, with corresponding notation for guitar: a simple Renaissance dance, printed by Pierre Attaingnant.

Lute tablature is similar to guitar tablature, but comes in at least three different varieties. The most common variety used today is based on the French Renaissance system (see example at right). In this style the strings are represented by the lines on the staff (occasionally the spaces above the lines on the staff), and the stops are indicated by lowercase letters of the alphabet (rather than numbers), with the letter 'a' indicating an open string and the 'j' skipped (as it was not originally a separate letter from 'i'). A six-line staff is used, just as for modern guitar tablature. However, lutes were not limited to 6 strings or courses (they could have as many as 19), and stops for any courses beyond the sixth were shown below the bottom line, with short diagonal strokes (see below).

The letters soon developed somewhat stylized forms for ease of recognition. In particular, the letter 'c' often resembled 'r'. This was common in many styles of Renaissance handwriting, but also helped to differentiate 'c' from 'e'. Also, sometimes 'y' was used for 'i'.

Lute tablature provides flags above the staff to show the rhythms, often only providing a flag when the length of the beat changes, as shown in the example. (Notice that this piece begins with a half measure.)

Other variants of lute tablature use numbers rather than letters, write the stops on the lines rather than in the spaces, or even invert the entire staff so that the lowest notest are on top and the highest are at the bottom.


As with guitar, various different lute tunings may be used, all written using the same tablature method. A tenor viola da gamba can usually be played directly from lute tablature as it typically uses the same tuning. A guitar can often be played from lute tablature by tuning the G string down to an F and putting a capo at the third fret to preserve the original pitch.

In standard Baroque lute tabulature, each staff has six lines, representing the first six courses. The course of the highest pitch appears at the top, and that of the lowest appears at the bottom. (The Italian Archlute of the same period uses an opposite system.)


Lowercase letters or "glyphs"are placed on each of these lines to represent notes. If it is required to play an open D course, for instance, a small "a" will be placed on the appropriate line. For a note with the finger on the first fret a "b", a note on the second fret a "c", etc. However, as mentioned above, "j" was not used since it was not considered a separate letter from "i", and "c" often looked more like "r". Thus:

G - a

would represent a G-minor chord,

All open strings would represent a D-minor chord:

D- ///a

The strings below the sixth course are notated with additional short "ledger" lines: glyphs are placed below the staff. These courses are tuned in accordance with the key of each piece played:

G- a
F- /a
E- //a
D- ///a
C- 4
B- 5
A- 6

A number of slightly different systems were used to show rhythm: some scribes and printers used headed notes, but it was simpler for a scribe to use headless tails for the fast-moving notes these plucked instruments commonly played (breve to semi-fusa); and early printers followed the scribal practice. Individual tails were sometimes combined into 'grids', resemblimg today's beams. The semibreve was indicated by an untailed line, the breve by a circled line or a line flagged to the left. Regarding notation of rhythms, French manuscripts tend to use a more florid script for the rhythmic values while English and Germanic manuscripts tend to use a more conservative script.

The lute was a virtuoso's instrument, and rapid ornamentation in the form of graces, trills, shakes, fall-backs, mordents, etc. were expected of players ad libitum to ornament the music artfully, beyond just playing the written notes. Some of these ornaments may be written out, but more commonly a special symbol would mark places where they might be used; these symbols are the subject for a special discussion; each scribe and composer had a different style of ornamentation and there were a variety of ways to notate them. However, for a general discussion of French tablature ornaments see Furnas' dissertation discussing the Manchester Lyra viol manuscript.[citation needed]

The majority of viola da gamba tablature manuscripts is written in French Baroque tablature. The difference between viola da gamba tablature (also called lyra viol tablature) and lute tablute is that the chords in lyra viol music must include all the strings between the highest and lowest notes in the chord. Lutinists, however, can play broken chords (chords that do not include all the internal strings within a chord). Additionally, a diagonal slash often appears in lyra viol manuscript, indicating a slur. As these distinction are subtle, manuscripts have often been misidentified.

Two features of French tablature are critical. French tablature does not use the letter i. It is replaced by the letter y. Second, the letter c is often written in a manner that suggest the letter r.

A few lyra viol manuscripts notate music above the octave. In such rare cases, no letters are ignored. Thus, letters follow: h, y, j, k, l, and m. Lyra viol music above the octave is extremely rare. Contemporary composers, including Peter H. Adams have written music up to the octave and a fifth above the open string.[citation needed]

German lute tablature

Types of lute tablatures

The origins of German lute tablature can be traced back well into the 15th century. Blind organist Conrad Paumann is said to have invented it.[5] It was used in German-speaking countries until the end of the 16th century. When German lute tablature was invented, the lute had only five courses, numbered 1 (the lowest sounding course) to 5 (highest). Each place where a course can be stopped at a fret is assigned with a letter of the alphabet, i.e., the first frets of courses 1 through 5 are represented by the letters a through e, the second frets by f through k, and so on. The letters j, u, w, are not used. Therefore, two substitutional signs are used, i.e., et (resembling the numeral 7) for the fourth course's fifth fret, and con (resembling the numeral 9) for the fifth course's fifth fret. From the sixth position upwards, the alphabetical order is resumed anew with added prime marks (a', b', ...), strokes above the letters, or the letters doubled (aa, bb, ...). When a 6th course was added to the lute around 1500 CE, different authors used different symbols for it. Chords are written in vertical order. Melodic motions are notated in the highest possible line, notwithstanding their actual register. Rhythmical signs, which are written in a line above the letters, are single stems (semibreves), shafts with one flag (minims), stems with two flags (crotchets), stems with three flags (quavers), stems with four flags (semiquavers). Stems with two or more flags can be grouped into units of two or four ("leiterlein" in German, i.e., small ladders).

Computer programs for writing tablatures

See List of guitar tablature software

Various computer programs are available for writing tablature; some also write lyrics, guitar chord diagrams, chord symbols, and/or staff notation. ASCII tab files can be written (somewhat laboriously) with any ordinary word processor or text editor.

Both Sibelius and Finale software offer some lute tablature support in Italian, Spanish, and French styles, but no German, as is offered by Fronimo. Sibelius and Finale do not provide fonts to score lute tablature giving an historic appearance, but can incorporate any fonts needed for any style desired, with extra set-up time, which can be easily transferred to additional scores. More specialized lute and other early music tablature support is provided by Fronimo by Francesco Tribioli and Django by Alain Veylit.

Guitar tablature

Guitar tablature consists of a series of horizontal lines forming a staff (or stave) similar to standard notation. Each line represents one of the instrument's strings. Therefore standard guitar tablature has a six-line staff and bass guitar tablature has four lines. The top line of the tablature represents the highest-pitched string of the guitar. By writing tablature with the lowest pitched notes on the bottom line and highest pitched notes on the top, tablature follows the same basic structure and layout as Western Standard Notation.

The following examples are labelled with letters on the left denoting the string names, with a lowercase e for the high E string. Tab lines may be numbered 1 through 6 instead, representing standard string numbering, where "1" is the high E string, "2" is the B string, etc.

The numbers that are written on the lines represent the fret used to obtain the desired pitch. For example, the number 3 written on the top line of the staff indicates that the player should press down at the third fret on the high E (first string). Number 0 denotes the nut — that is, an open string.

For chords, a letter above or below the tablature staff denotes the root note of the chord.

Examples of guitar tablature notation:

The chords E, F, and G:

     E   F   G

Tablature can use various lines, arrows, and other symbols to denote bends, hammer-ons, trills, pull-offs, slides, and so on. These are the tablature symbols that represent various techniques, though these may vary:

Symbol Technique
h hammer on
p pull off
b bend string up
r release bend
/ slide up
\ slide down
v vibrato (sometimes written as ~)
t right hand tap
s legato slide
S shift slide
* natural harmonic
[n] artificial harmonic
n(n) tapped harmonic
tr trill
T tap
TP tremolo picking
PM palm muting (also written as _)
\n/ tremolo arm dip; n = amount to dip
\n tremolo arm down
n/ tremolo arm up
/n\ tremolo arm inverted dip
= hold bend; also acts as connecting device for hammers/pulls
<> volume swell (louder/softer)
x on rhythm slash represents muted slash
o on rhythm slash represents single note slash
·/. pick slide

Guitar tablature is not standardized and different sheet-music publishers adopt different conventions. Songbooks and guitar magazines usually include a legend setting out the convention in use.

The most common form of lute tablature uses the same concept but differs in the details (e.g., it uses letters rather than numbers for frets). See below.

When circles are used to indicate fingering, sounded notes are white, an assumed root is grey, and a sounded root is black.[6][7]

Musette tablature

Musette tablature from Borjon de Scellery

Borjon de Scellery's Traité de la musette includes pieces for musette de cour in both standard notation and tablature, plus a partial explanation of his system. The numbers refer to the keys on the instrument, and are shown on a five-line stave so that they also correspond with standard notation. Standard symbols for note lengths are written above each tablature staff.

The standard notation shown in the illustration is also taken from de Scellery; no explanation is given for the slur-like symbol; the comma , is explained as indicating a tremblement, starting on the note above. No explanation is given for the unusual beaming or the significance (if any) of where note-length symbols are repeated.

Harmonica tablature

The harmonica tablature was basically a one-to-one mapping of the notes to the corresponding hole and, thus, is a type of numbered musical notation. For each note, it will indicate the number of the hole to play, direction of breathing (in or out), and even bending (usually for diatonic) or "slide-in" (usually for chromatic)

One method of indicating direction of breath is by using arrows; another is by using either a "+" or "-" sign, or "i" (for inhale) and "e" (for exhale). Bending is shown with a bent arrow with the direction of breath, or by a circle around the note, or even a simple line next to the breath indicator. Additional lines and/or circles may be used to indicate how much to bend.

For example, on a "C" diatonic instrument:

Unbent    Bent lv1    Bent lv2    Bent  lv3
3i (B)    3i|  (Bb)   3i|| (A)    3i||| (G#)

To indicate button-press on a chromatic instrument, a similar indication to first-level bending may be used.

The breath indicator may be placed right next to the hole number, or below the number. The same is true for bending or button-press indicators.

To indicate the beat, in the arrow system the length of the arrow may be varied. However, the more popular method is to use a slightly simplified rhythm-symbol notation, such as "o" for a semibreve, // for a minim, "/" for a crotchet, "." for quavers, and place them above the characters, while spacing them accordingly.

For chords, the numbers to play are shown, so, for example: a C major (CEG) chord (on a C diatonic instrument): 456e However, they may simplify it, especially when playing blues. For chords, it was common to just play three or two holes instead (sometimes even just one), especially when the instrument is not of the same key. For example, in the blues progression in G (G G G G7 C C G G D7 D7 G G) it is common to use a C diatonic instrument, and notate the following:

  • G chord (G-B-D): 34i (BD)
  • G7 chord (G-B–D-F): 45i (DF).
  • D7 chord (D-F-A-C): 4i (D) or 4e (C)

There are many harmonica tablature systems in use. The easiest tablature system works like this.

Diatonic Harmonica tablature

 2  = blow the 2 hole
-2  = draw the 2 hole
-2' = draw the 2 hole with a half bend
-2" = draw the 2 hole with a full bend

chords are shown by grouping notes with parentheses

(2 3) = blow the 2 hole and the 3 hole at the same time

Chromatic Harmonica tablature

  2 = blow the 2 hole
 -2 = draw the 2 hole
 <2 = blow the 2 hole with the button in
<-2 = draw the 2 hole with the button in

Harmonica tablature is usually lined up with lyrics to show the tune and the timing and usually tells one the key of the harmonica for which the song is tabbed.

Here is an example of harmonica tablature:

"Mack the Knife" C Diatonic

5   6   -6   -6   5  6   -6     -6
Oh the shark has pretty teeth, dear
-4  -5  -6    -6  -4 -5   -6
And he shows them pearly white
 6  -7  -8    7   -7   -6  7     -4
Just a jack knife has MacHeath, dear
 5  -5   7   -4  7  -7  -6
And he keeps it out of sight

Legal issues

There has been much controversy over the legal position of tablature available on the Internet, as many Internet tablature websites provide user-created tablature without properly acquiring a print license from, or paying royalties to, the original songwriter and, often, the music publisher that controls these licenses. Although many of the Internet tablature websites that offer user-created tablature do not charge consumers for these transcriptions, revenue generated from advertising on these websites is typically kept by the website owners as profit, or used to cover the website's maintenance costs, and no — or very limited — royalties are received by the original songwriter. Further, music publishers and artists have been wary to license content to certain user-generated tablature websites due to quality issues with the tablature created by amateur users.

Such free Internet tablature sites often attempt to defend themselves by claiming to be educational providers or non-profit organizations, even if not formally registered as such.[8][not in citation given] This leads to considerable difficulty justifying the service as legal under the fair use doctrine of copyright law (see Fair Use As A Defense). The legality of free Internet tablature served by such websites is disputed, largely because websites have thus far only been threatened with legal action; the issue has yet to be taken to court.

As of December 12, 2005, distributing free tablatures of copyrighted music using the Internet was considered illegal by the music industry in the United States. By early 2006, an unprecedented legal move was taken by the Music Publishers' Association (MPA), initiating legal action against tablature websites that hosted interpretations of songs and music. The Music Publishers' Association (MPA) had been pushing for websites offering free tablatures to be shut down. MPA president Lauren Keiser said that their goal is for owners of free tablature services to face fines and even imprisonment.[9] Several websites that offer free tablature have already taken their tablature off-line until a solution or compromise is found. One of the proposed solutions is an alternative compensation system, which allows the widespread reproduction of digital copyrighted works while still paying songwriters and copyright owners. In addition, there are now a number of "legal" services offering guitar tablature that have been licensed by music publishers.[10]

One site,, contacts the bands themselves for permission to post tablature. Few bands have declined the request.[11]

The tablature debate was featured on NPR's Morning Edition in a segment entitled "Music Industry Goes after Guitar Tablature Websites" on August 7, 2006.[12]

On April 10, 2010, Ultimate Guitar, a Russia based, free online tablature site has entered a licensing agreement with Harry Fox Agency.[13] The agreement included rights for lyrics display, title search and tablature display with download and print capabilities. HFA’s over 44,000 represented publishers have the opportunity to opt-in to the licensing arrangement with UG.

Rise of legal guitar tablature sites

In light of the legal questions surrounding user-created on-line guitar tablature, a number of companies have been formed that claim to offer consumers legal on-line tablature, which has been officially-licensed from songwriters and/or music publishers. These companies offering legal content generally fall into three categories:

  1. Websites that offer "professionally-created" content: These websites typically hire professional musicians to transcribe songs into guitar tablature, and generally charge anywhere from $0.99 to $6.99 for the ability to purchase legal pieces of guitar tablature. These websites also claim to have acquired the proper licenses to display this tablature on-line. Several websites in this first category specifically cater to guitarists, including[14] and[15]
  2. Websites that offer "user-created" tablature, but have obtained the proper legal clearances to post these transcriptions on-line. There are several websites that fall into this second category, including Guitar World Tabs,[16],[17] and[18] which generally do not charge consumers for using these user-created tablature pieces, and share any advertising revenue with music publishers and/or songwriters.
  3. Websites that index other tablature resources, and offer unique formatting options, such as cleantab[19] and chordie.[20] had been closed down due to complaints from copyright holders. However, as of February 23, 2006, the owners of Mxtabs put the website back on-line with a letter explaining their position. In short, they believe that the purpose of Mxtabs is to "aid musicians in learning their instruments." They say that Mxtabs has accounted for as much as $3000 a month in sheet music sales, and offers many tablatures that do not have equivalent sheet music published, so Mxtabs and similar sites are the only place that musicians can find a way to play these songs (other than figuring the songs out for themselves). The letter concludes by pointing out that tablatures have never been proven to be illegal, then requesting that sheet-music companies contact Mxtabs in order to create a system of tablature licensing.

On February 29, 2008, relaunched as the first legitimately licensed site designed to provide musicians with access to free tablatures, while also compensating music publishers and songwriters for their intellectual property. Similar to other user generated content sites, users are encouraged to create, edit, rate, and review their own tablature interpretations of their favourite songs. However, unlike other user-generated content sites, only songs that have received explicit permission from participating copyright owners will be made available on-line.

Guitar Tab Universe

On 17 July 2006, Guitar Tab Universe (GTU) posted a letter on its home page that its ISP had been jointly threatened with legal action by the National Music Publishers Association (NMPA) and the MPA "on the basis that sharing tablature constitutes copyright infringement".[21]

In response, GTU's site owner(s) immediately created a website named Music Student and Teacher Organization (MuSATO) to attempt to reposition themselves from an illegal-copyrighted-materials provider to an "education provider". MuSATO's main objective is to use fair use as their rationale to publish tablature free of charge. By claiming to be an educational provider, they do not have to obtain publication rights nor pay royalties to the original composers. MuSATO claims to be educational by classifying users downloading tablatures as "music students" and transcribers as "music teachers".

Furthermore, MuSATO also argues that Internet guitar tablature does not infringe upon publishers' copyrights because the tablatures it provides does not contain rhythmic information and therefore is not an entirely accurate representation of the song. However, it did not note that some lyrics provided are copyrighted. It has since removed lyrics from all tablature in an attempt to appease the NMPA.[citation needed] Tablature is not directly provided to users unless it is through the forum, where members link to other websites hosting tablature. has been contacted by the NMPA and MPA with similar copyright infringement allegations. The NMPA and MPA have also threatened Guitar Tab Universe with similar legal action. A copy of the certified letter received by the site owner, along with a brief note similar to the one posted on Mxtabs, has been posted on their website.[22] is another tablature site that has been removed after receiving letters from lawyers representing the NMPA and the MPA.[citation needed]

See also


  1. ^ ocarina tabulature
  2. ^ As of 2007, Google searches indicate that word "tablature" (~6 560 000 hits) is used 27 times more frequently than "tabulature" (~335 000 hits)
  3. ^ See Willi Apel's book on music notation, The Notation of Polyphonic Music (1942), for a fuller history.
  4. ^ Grove dictionary
  5. ^ Sebastian Virdung, Musica getutscht (Basel 1511), and Martin Agricola, Musica instrumentalis deudsch (Wittenberg 1529), quoted in: Oswald Körte, Laute und Lautenmusik bis zur Mitte des 16. Jahrhunderts. Unter besonderer Berücksichtigung der deutschen Lautentabulatur (Publikationen der Internationalen Musikgesellschaft. Beihefte 3. Leipzig: Breitkopf und Härtel, 1901), 76 seq.
  6. ^ Latarski, Don (1999). Ultimate Guitar Chords: First Chords, p.5. ISBN 9780769285221.
  7. ^ Don Latarski, Aaron Stang (1993). Practical Theory for Guitar, p.6-7. ISBN 9780898986921.
  8. ^ "I, Buanzo, Support Musicians and Their Right to Enhance Themselves by Reading Tabs!"
  9. ^ BBC report
  10. ^ Fretbase, Can Guitar Tablature Go Legit?
  11. ^
  12. ^ NPR report
  13. ^
  14. ^
  15. ^
  16. ^
  17. ^
  18. ^
  19. ^
  20. ^
  21. ^ Guitar Tab Universe letter.
  22. ^ Guitar Tab Universe MPA allegations.

External links

Wikimedia Foundation. 2010.

Look at other dictionaries:

  • tablature — [ tablatyr ] n. f. • 1596; tabulature 1529; lat. médiév. tabulatura; de tabula, francisé d apr. table 1 ♦ Mus. Figuration graphique des sons musicaux propres à un instrument. La tablature d un orgue. Tablature de luth, de guitare. 2 ♦ Vx Leçon.… …   Encyclopédie Universelle

  • tablature — Tablature. s. f. Arrangement de plusieurs lettres ou notes de musique sur des lignes pour marquer le chant à ceux qui jouënt des instruments. Joüer sur la partie, joüer sur la tablature. tablature de luth, de violon, d orgues &c. On dit fig. qu… …   Dictionnaire de l'Académie française

  • Tablature — Tab la*ture, n. [Cf. F. tablature ancient mode of musical notation. See {Table}.] 1. (Paint.) A painting on a wall or ceiling; a single piece comprehended in one view, and formed according to one design; hence, a picture in general. Shaftesbury.… …   The Collaborative International Dictionary of English

  • tablature — (n.) type of musical notation for lute or stringed instrument, 1570s, from Fr. tablature (1550s), from L. tabula table (see TABLE (Cf. table) (n.)); influenced by It. tavolatura, from tavolare to board, plank, enclose with boards …   Etymology dictionary

  • tablature — англ. [тэблэ/йчэ] Tabulatur нем. [табуляту/р] tabulatura лат. [табулату/ра] tabulatore фр. [табюлятю/р] табулатура: 1) система записи инструм. музыки буквами и цифрами 2) правила построения муз. поэтич. произведений мейстерзингеров …   Словарь иностранных музыкальных терминов

  • tablature — [tab′lə chər] n. [Fr < ML tabulatura < tabulatus, tablet < LL tabulare, to provide with a table < L tabula: see TABLE] 1. a method of notation for guitar or ukulele in which vertical lines represent the strings, horizontal lines… …   English World dictionary

  • Tablature — Une de plus anciennes tablatures manuscrites pour luth connues, l Ave Maria de Bartolomeo Tromboncino, vers 1521. En musique, une tablature est une forme symbolique de notation musicale adaptée à un instrument spécifique, destinée à une lecture… …   Wikipédia en Français

  • tablature — (ta bla tu r ) s. f. 1°   Ancien terme de musique. Pièce de musique qui est écrite sur un papier, qui est tirée à cinq ou six lignes, et qui est en notes, en chiffres ou en lettres pour servir à apprendre la musique vocale ou instrumentale. Voilà …   Dictionnaire de la Langue Française d'Émile Littré

  • tablature — /tab leuh cheuhr, choor /, n. 1. Music. any of various systems of music notation using letters, numbers, or other signs to indicate the strings, frets, keys, etc., to be played. 2. a tabular space, surface, or structure. [1565 75; < MF,… …   Universalium

  • TABLATURE — s. f. Arrangement de plusieurs lettres ou signes sur des lignes, pour marquer le chant à ceux qui chantent, ou qui jouent des instruments. Chanter sur la tablature. Jouer sur la tablature. Tablature de violon, d orgues, etc. Entendre bien la… …   Dictionnaire de l'Academie Francaise, 7eme edition (1835)

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”

We are using cookies for the best presentation of our site. Continuing to use this site, you agree with this.